3 Geekcreit® 24 V 4A–6A power supplies for $13
$12.99
I already reviewed a similar power supply here, and I remember liking it at the time.
Brief specs from that review:
Input voltage: 85–265 V
Output voltage: 24 V
Load current: listed as 4–6 A*
Output power: 100 W (maximum)
As before, the board measures 107 × 57 × 30 mm.
Judging by the photos on the product page, it’s the same board, with the PWM controller on the underside, so the test results from the review should apply.
Shipping to me costs extra, so the price isn’t as attractive
But shipping to Russia really is free, and the price is $13
You can also save a bit more with points (1.95) and by opting out of insurance (26 cents), bringing the price down to $3.86 each.
Also recommended: a multimeter. It costs $13.99, but with coupon BG12MT108T you can get it for $9.99 — link
$12.99
This page was found when searching for:
lp3667 даташит, 1, lp3667b, lp3667 схема включения, lp3667ah datasheet, lp3667b схема включения, lp3667ah, lp3667 datasheet, lp3667, lp 3667 схема
lp3667 даташит, 1, lp3667b, lp3667 схема включения, lp3667ah datasheet, lp3667b схема включения, lp3667ah, lp3667 datasheet, lp3667, lp 3667 схема
Questions and answers
What are the specifications of the Geekcreit® power-supply boards?
The stated input is 85–265 V, output is 24 V, load current is 4–6 A, and maximum output power is 100 W. The board measures 107×57×30 mm.
Why does the author say the earlier test results may apply to these Geekcreit® boards?
Photos suggest the board is the same as in the earlier review, with the PWM controller on the underside.
How much do the three Geekcreit® power supplies cost in the deal?
The article gives a price of $13 for three boards with free delivery to Russia. Using points and disabling insurance brings the stated cost to $3.86 per board.
Calculate manuallyAll calculators
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments4
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister
Comments are published in their original language.