HT 32700 6000mAh LiFePO4 batteries
To keep up with new posts on the blog, I recommend following me on Instagram. I'll post notifications about every new article there, and might also share something interesting from time to time: link to the account
You can also subscribe to updates and new articles on the Telegram channel - https://t.me/KirichBlog
A quick search shows that these batteries are sold by quite a few vendors, so they seem to be fairly popular, and a review should be of interest. The link in the review title goes to other batteries, but it seems fair to include it, since it was the same person who sent me these "test subjects".
There are four batteries, plus a holder. By the way, these holders have a problem: the plastic cracks fairly quickly. I've seen this happen even with practically new holders. This affects the 32700 and 26650 sizes; I don't think I've seen it with 18650 holders, and I don't have a 21700 holder.

I found the specs on some website, although these batteries often turn up on Alibaba.
Nominal Capacity: 6ah
AC Impedance: ≤8.5mΩ
Nominal Voltage: 3.2v
Cell Size: 32.2±0.2 mm(Dia.),70.5±0.3 mm(Height)
Cell Weight: 140± 5 g
End-of-charge Voltage: 3.65v
End-of-charge Current: 0.3A
Max continuous Discharging Current: 18A
Max Pulse Discharging Current: 30A for 5S
Cycle Life: ≥2000 cycles
Each battery has a unique QR code, which suggests they aren't some no-name basement-made product. That's a good sign.

There's a code stamped on the bottom. Three of the batteries have the same code, while the fourth has a completely different one, so the main test will include batteries with different markings.

Dimensions and weight.

The impedance is roughly in line with that of other similar cells.

Like the other batteries from this person, these arrived at around 50% charge. However, the initial charge revealed a difference in the capacity measured, ranging from 2807 to 2966. Both values came from batteries I selected for the test, purely by chance.

The listed specs don't specify the charging current. Another source gives 1C, but I wanted to test these cells under exactly the same conditions as the other ones I've tested before.
So I started by testing charging at 1C and 3C. Nothing new in the normal mode; everything was typical.

The fast charge really was fast: under 26 minutes, if I remember correctly. The other samples took a little longer, at least.
The battery heated up to 55 degrees during charging. In any case, I don't recommend charging at these rates; 0.5–1C is optimal.

The tests were run under the same conditions as for the previous 32700 batteries: 0.2, 0.5, and 1C, as well as 10, 15, 20, and 30A.
The first sample fell just short of 6000mAh, but performed quite well overall. By the way, the batteries have stickers showing their measured capacity. As far as I know, it was measured down to 2.5 volts, while I discharged them to 2 volts. As you can see, though, the difference isn't significant because of the discharge curve characteristics of this type of battery.

The temperatures were also within the normal range. For example, the Vapcell G62 reached 74 degrees at 30A, while this one didn't even reach 70.
Results at 15, 20, and 30A.

The second sample did even better, with a capacity that actually exceeded the claimed 6000mAh.


The remaining capacity after discharging at 30A also differed: the first sample delivered 999mAh, while the second delivered 59mAh. If it weren't for the noticeable spread, I'd say that was a very good result. That said, this test is rather approximate.

Comparison of the first and second samples at 0.2, 1C, 15, and 30A. The first sample is about 80mAh behind. Incidentally, this is the one marked W rather than H3 like the others. It'll be interesting to see how it compares with the rest.

The third and fourth samples were tested using a shorter program, at 0.2, 1C, and 20A. The spread in the results is noticeably smaller here.

Now let's look at all of them together.
Interestingly, the batteries happened to line up in order: the first cell had the lowest capacity, and the fourth had the highest. These are the results at 1C and 20 A. As I mentioned above, the first cell was marked W, while the others were marked H3. The labels also showed that the first cell had a lower capacity than the others, but the order after that was slightly different—not 2, 3, 4, but 4, 3, 2. The difference was tiny, though; I suspect the second cell was a little warmer during the test. Of course, a difference like that could also just be down to measurement error.

Now for the comparison. The following batteries were included:
1. The ones under review — red
2. Vapcell G62 from the first batch — orange
3. Vapcell G62 from the second batch — yellow
4. Varicore 32700 — green
5. Liitokala 32700 — light blue
6. Vapcell G65 — blue.
The comparison was carried out at 0.2C, 10 A, and 20 A.
Unfortunately, at 0.2C the batteries under review fell noticeably behind almost all the others. Only the no-name Varicore cells delivered less capacity. To be fair, though, the three Vapcell models were originally rated at 6200–6500 mAh, so this result was somewhat predictable.

At 10 A, the pecking order stayed the same, but the graph clearly shows that the average voltage of the batteries under review is in the same group as the others, which is certainly a good sign. In other words, their current delivery is fine.

But in my opinion, the test at currents closer to the maximum gives a clearer picture. In this case, that's 20 A, or about 3C, as stated in the specs.
Here you can see that although the batteries under review still came in second for capacity, their average voltage was in the same group as the Vapcell G62 and G65. So they fell behind only in capacity; their current delivery is excellent.

Conclusions.
In my humble opinion, while these batteries don't boast high capacity, first, their capacity matches the rating, and second, they perform very well both at the rated maximum of 3C and when overloaded with a prolonged 5C discharge. The specs say they can handle 30 A for only 5 seconds, but I put them through a full cycle—what a sadist :)
In short, these are decent batteries, and if you find them at a reasonable price, they're a perfectly good choice for small UPS units. But if you're installing them in a UPS, it's better to use at least a 4S2P pack, or better yet, 4S3P; they'll perform better that way.
That's all for now. I hope you found this useful, and as always, thanks for your comments and support!
lifepo4 таблица 32700, аккумулятоpы 32700 нт 6000 mah мжно ли в шурупрверт, какие аккумуляторы производит компания ht, https://www.kirich.blog/obzory/akkumulyatory/1221-akkumulyatory-ht-32700-6000mah-lifepo4, 3.2v 32700 ht 6000 mah, аккумулятор 32700 3.7v 6000mah lifepo4
Questions and answers
What capacity did the HT 32700 6000mAh cells deliver?
One cell fell slightly short of 6000mAh, while another exceeded it. Overall, the author considers their capacity consistent with the rating.
How do HT 32700 cells perform at high currents?
At 20 A, their current delivery is good and their average voltage is comparable to Vapcell G62 and G65. During a sustained 30 A discharge, temperature remained below 70 °C, although the cells are specified for 30 A only for 5 seconds.
Are HT 32700 cells suitable for UPS units?
The author considers them suitable for small UPS units. For better results, he recommends at least a 4S2P pack, or preferably 4S3P.
The figures from this review are in the measurement database: Batteries
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments4
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister




Comments are published in their original language.