/       /       /    What Sometimes Comes in for Repair: A Strange Charger
Support the project on Patreon


What Sometimes Comes in for Repair: A Strange Charger

First, I should say that I know exactly how this charger works. It’s strange in its own right, but it’s probably better to look at the photos and read the short description. The real surprise comes at the end—I’m almost certain you’ve never seen anything like it.

As usual, a reminder: to keep up with new posts on the blog, I recommend following me on Instagram, where I’ll post notifications about every new article and maybe write about something interesting too: link to my account

You can also subscribe to updates and new articles on the Telegram channel - https://t.me/KirichBlog

It all started when a friend called and asked me to check a couple of his chargers. According to him, they weren’t supplying current to the battery. I’ll give away the ending: the chargers weren’t the problem.

One charger wasn’t particularly interesting: some device from a small-scale manufacturer, with rather unusual behavior that turned out to be perfectly normal. But who reads the manual before using something, right? :)

The second charger, though, was truly original—in every sense of the word.


The author’s one-of-a-kind front panel design is something else. I mean, the labels are more or less clear, but still—you could at least make them a little neater...
And yes, the device is clearly not from the ’80s; it’s considerably newer.

Judging by the labels on the cover and the ammeter scale, the output current is up to 8 A, at 12 V.


The insides are more or less in keeping with the outside.
The second problem my friend mentioned was: he switched it on, and smoke started coming out...

It turned out to be simple. See the indicator backlight bulb? There, at the top right. Yes, despite its original appearance, the designer did have a sense of style: it’s not just a stylish indicator, but a backlit one too—and not with your “modern” lighting, but with a nice, warm incandescent bulb.


It was all very straightforward: the bulb had come unstuck from the indicator and one of its contacts touched a contact on either the case or the transformer. It looks like the bulb burned out and the wires melted, though it’s not clear which happened first.


The circuit is familiar to many and works perfectly well. I made a different version, with desulfation; this one is simply a thyristor regulator in the transformer’s primary circuit.


I talked my friend out of using this device, at the very least because it’s unsafe. That variable resistor carries mains voltage, the case is metal, and I think you can guess what the terminals are like.


I could have overlooked the one-of-a-kind design, the loose bulb—these things happen—and even the live case, maybe if it came with rubber gloves and an insulating mat. But I’ve never seen anything like this, and I doubt you have either.
No, your eyes aren’t deceiving you: the heatsinks are tiny for 8 A, and yes, they’re screwed to the case, and YES, the diodes are glued to the heatsinks with hot glue!

For crying out loud, the diodes are glued to the heatsinks with hot glue!


And that’s about it. Have you come across anything interesting? :)
This page was found when searching for:
szrt-200-a1 блок питания, https://www.kirich.blog/stati/zametki-na-polyah/1136-chto-inogda-popadaet-ko-mne-v-remont-strannoe-zaryadnoe-ustroystvo, szrt-200-a1 блок питания схема, ремонт зарядное устройство, корпус текстолита зарядного устройства

Questions and answers

What unusual feature did the author find in the 12 V, 8 A charger?

The diodes were glued to small heatsinks with hot-melt glue. The charger also used a thyristor regulator in the transformer’s primary circuit.

Why did the author advise against using this charger?

The variable resistor carried mains voltage, and the enclosure was metal. The author considered the device unsafe to operate.

Why did smoke come from the charger?

The indicator backlight bulb had come loose and touched a contact or the transformer casing. It apparently burned out and the wires melted, though the author could not tell which happened first.

The figures from this review are in the measurement database: Chargers

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments7

Comments are published in their original language.

  1. 26 February 2023 12:13#1
    И самое интересное что оно работало, устраивало своего владельца, и неисправность не совсем неисправность)))). Не отклейся лампочка, оно продолжало бы радовать своего владельца, а автор не узнал бы секрет приклеивания к радиатору термоклеем и других неожиданностей. ????
    +1
    1. 26 February 2023 23:42#2
      Сомневаюсь что оно работало, иначе термоклей давно бы стёк на дно корпуса, потому как уже при 4-5 ампер токе температура диодов будет больше сотни градусов, а заряднико может до 8А.
      Не, сама схема рабочая, здесь у меня вопросов нет, также у меня нет вопросов к корпусу, каждый старается в меру своих сил.
      Вопросы у меня к двум вещам:
      1. Электробезопасность, переменный резистор на котором сетевое напряжение прикручен к металлическому корпусу, пробить может на раз, а аккумулятор частенько заряжают прямо в гараже.
      2. Метод крепления выходных диодов.

      Если бы у товарища не было другого зарядного, то попробовал бы что-то придумать с этим, но если есть другое, причем заметно лучше, то смысл тратить время на это, нулевой.
      Да и если бы делал, то сразу переставил в другой корпус, хотя по сути там от старого зарядного только трансформатор наверное и остался бы в итоге.
      0
  2. 26 February 2023 17:24#3
    Может быть попозже узнал бы?
    Моего брата как-то попросили исправить вытяжку на кухне. Стала бить током. До этого 4 года работала и не била током. Оказалось, что земли не было. А начала биться после того, как появилась посудомойка, у которой была земля. Ну и, соответственно, случайно обоих устройств одновременно коснулись.

    Из телеграмма ссылка https://www.kirich.blog/P1137 не открывается, кстати 
    +1
    1. 26 February 2023 23:44#4
      Проблема  в том, что могло случиться так, что это "попозже" могло стать последним, утечка на конденсаторе фильтра и пробок на корпус, это все таки разные вещи.

      То у меня из-за проблем с инетом иногда браузер глючит и обзор опять задвоился, в блоге удалил, а в ТГ остался.
      0
  3. 26 February 2023 23:45#5
    Может это прозрачный силикон, а не термоклей?
    0
    1. 27 February 2023 11:54#6
      Не, субстанция похожа именно на термоклей, это видно даже по фото.
      0
  4. 1 May 2023 09:46#7
    Блин, этому кулибину ручки бы поотбивать, чтоб больше такое не творил.
    Любовно одел на ручку для переноски кембрик, а саму ручку прикрутил болтиками в тонюсенькую жесть без контрогаек.
    На индикаторе не поленился выписать циферки тока возле делений, и пофиг, что деления явно разной ширины.
    Общее впечатление от конструкции: И ТАК СОЙДЁТ, ДЛЯ ТЁЩИ ДЕЛАЛ.

    +1

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister