/    Measurement database » Power supplies » AD-12-1A or LRC-60-1400
Support the project on Patreon


Comparison · Power supplies

AD-12-1A or LRC-60-1400

Two models side by side: measurements taken by the author in their reviews, and their conclusions. The better value in each row is highlighted.

In brief: Based on review measurements: Ripple: AD-12-1A (250 mV vs. 600).

ModelAD-12-1AAD-12-1A2025Read review →LRC-60-1400LRC-60-1400Light Route · 2020Read review →
Current, A11.4
Ripple, mV250600
Review conclusionWith reservationsRecommended

Only in one review: No load 0.4 W (AD-12-1A); Temperature rise 130 °C (AD-12-1A).

AD-12-1A: The output diode overheats at 1 A, though the author considers it adequate at lower loads.

LRC-60-1400: It stabilizes current well and withstands high input voltage, but runs about 4°C hotter than the first model and starts slowly.

Figures were taken from the review text and checked against the quoted passages. Measurement conditions differ between reviews, so read the reviews yourself before buying. Prices at the time of review.

Compare two modelsor

Similar comparisons

← All: power supplies