/       /       /       /    And another roundup of various products for radio amateurs, part 8
Support the project on Patreon


And another roundup of various products for radio amateurs, part 8

I came down with something, which is why there haven't been any new reviews. Still, I found time to browse AliExpress, and today I want to share some interesting and potentially useful products—or, more precisely, links to them.

First up, resettable fuses. They're sometimes confused with PTC thermistors, which is completely wrong: they work on a somewhat different principle.
I found a seller with a wide selection. Prices vary, but so do the fuse ratings. Also, note that these fuses are usually rated not only by current but by voltage too. I don't recommend "buying with extra headroom," because as the voltage rating goes up, so do the fuse's internal resistance and size (and price) for the same current rating. So if your circuit runs at 12 V, get a 16 V fuse; for 24 V, get a 30 V one; and for anything higher, go for 60–72 V, although higher-voltage options are available too.
16 V, 0.5–15 A - link, $1.26–3.10 for 20 pcs
30 V, 0.5–9 A - link, $1.42–3.93 for 20 pcs
72 V, 0.1–4 A - link, $1.26–3.13 for 20 pcs




A step-down converter. It's a bit pricey, and someone will probably say, "For that money, I'd buy something from the RD series." But come on, folks: up to 50 A, a built-in ammeter/voltmeter, CCCV modes, and a Hall sensor instead of a shunt!
Link, costs $43.27, but there's a discount coupon on the product page.




A power supply—or rather, a pair of power supplies, since the listing includes two. They don't seem particularly special and look a lot like a Sanmim unit, but there's one catch: they have three output voltages. That's not even the main thing, though—the real standout is their input voltage range: 100 to 520 V AC, or 140 to 735 V DC! Best to check the product page for the rest of the details.
Link, $3.26 for 2 pcs + $6.73 shipping



Another converter from the same seller as the power supplies, and an interesting one too. What makes it interesting is its galvanic isolation (a big plus for safety), a familiar 12 V output, and load current up to 30 A. It's also a genuine Murata, with an input voltage range of 36–72 V, making it suitable for all sorts of electric bikes. I've reviewed similar units, so I can confidently recommend it - link, about $11 including shipping.

This seller also has other models of similar converters with 3.3, 8.2, and 9.6 V outputs




I already wrote about an LVDS-output TV tuner. This is basically the same thing, but with an Android TV box added. It's listed as running version 8. The memory is a bit limited, of course—1 and 4 GB—but it has Ethernet, so you can watch online TV and, naturally, turn an old regular monitor into a smart TV :)
Unfortunately, I couldn't figure out whether it supports DVB-T2, but I did find out that it supports a rare language: Ukrainian....

Link, $33.00




A cute little display (C). Yes, the photo shows the display itself, but the watch face looks like a real mechanical watch, even though it's just a 240×240-pixel TFT. I don't need one, but for some reason I want to buy it :)
Link, $4.93–6.88, plus about $6 for shipping.




Another little tuner, T2, low price, frame included - link, just $13.89–14.59, and there's a coupon on the product page too




Inexpensive 12 V, 5 A power supplies. The reviews are mixed, but at this price, why not? - link, $4.55




Another power supply, also 12 V, but rated for 3 A and clearly a branded unit - link, costs $2.88, with $6.07 shipping. Shipping doesn't depend much on the quantity, so it's worth buying two or three.




And now for something a little unusual...
First, it turns out the Chinese are pretty good at sorting assorted components—sometimes new, sometimes desoldered from circuit boards—and selling them successfully. I was a little surprised. They sell them by weight; for example, 0.5 kg costs $25 here. Damn, half a kilo of junk for $25, and people actually buy it - link.



And this one isn't really aimed at electronics hobbyists, although if you replaced the funny pictures (there are 20 of them) with examples of repairing devices you can't get into without some serious disassembly, why not? In any case, it looks pretty well made, and it might actually interest someone :)
Link, price $8.18



That's all for today, but the hunt continues ;)

Questions and answers

Which resettable fuses are included in the roundup?

The options listed are 16 V, 0.5–15 A; 30 V, 0.5–9 A; and 72 V, 0.1–4 A. The author recommends choosing a voltage close to the circuit supply, such as a 16 V fuse for a 12 V circuit.

What are the features of the converters mentioned?

One buck converter is rated for up to 50 A and has a built-in ammeter-voltmeter, CCCV modes, and a Hall-effect sensor. Another is an isolated Murata converter with a 36–72 V input, 12 V output, and load current up to 30 A.

Which TV devices and power supplies does the article mention?

The roundup includes an Android TV box with LVDS output, a separate T2 tuner, and 12 V power supplies, including 5 A and 3 A models. The author could not determine whether the TV box supports DVB-T2.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments1

Comments are published in their original language.

  1. 4 October 2020 12:49#1
    Б/У блоки питания, как раз подходят для читателей с блога. Достали мультиметр/паяльник и сделали как надо.
    1) Делаем внешний осмотр платы - пайка, маркировку рабочего напряжение на конденсаторах. Иногда попадались неправильные, не для нашей сети 220V (высоковольтные). На выходе, при замене, китайцы бывало путали конденсаторы по напряжению (платы 12V и 5V).
    2) Обязательно проверяем, прямо на плате, ёмкость высоковольтного конденсатора на 400-450V. Конденсаторы на выход ставим новые фирменные. Если на плате остались родные фирменные конденсаторы и дома только новые китайские, то оставляем родные конденсаторы. Лучше сразу поставить новый мелкий конденсатор по питанию ШИМ (обычно 10/22uF - 35/50V).
    3) Около транзистора находим резистор мощностью 1Вт (низкоомный в районе 0,4-0,5 Ом).
    Переворачиваем плату и смотрим на его пайку - китайцы обычно к нему напаивают свой smd-резистор. Таким образом изменяют заводскую (родную)  защиту по току. Этот резистор паяют кверху пузом (маскируют) и берут какой есть под рукой (по мощности).
    Вместо одного резистора мощностью 1Вт, могут быть несколько smd-резисторов ( с завода).
    4) Находим TL431 (бывает в разном исполнении) - туда китайцы часто напаивают свои резисторы (изменяют выходное напряжение)
    +2

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister