More Products That Might Interest Radio Amateurs, Part 4
So, let’s get started.
A power bank of sorts, with a 24 V output and the option to connect multiple units in series. It’s designed for 21700 cells and requires no soldering — link, priced at $17.23–27.42 depending on the configuration. Batteries are not included.

Basically the same thing, but for 18650 batteries, link, priced at $28.33–39.95.

A powerful step-up DC-DC converter that can boost 24–96 V to 140 V at up to 15 A — link, priced at $65.00–72.00.

A powerful step-down converter, with an input range of 5–58 V, an output range of 1.3–56 V, and current up to 26–30 A — link, priced at $46.50.

A simple 75 W electronic load. I have some reviews of adjustable power supplies from the same manufacturer somewhere, so I can definitely recommend it — link, priced at $7.53.

A volume control—essentially a clone of Nikitin’s controller, except this one uses an ADC chip to measure the voltage across a potentiometer and control a bank of relays accordingly. Since it’s controlled by voltage, you can cascade several of these controllers for systems with more than two channels. I also bought some of the same chips and am thinking of building a digitally controlled variac — link, priced at $31.88.

And since we’re talking about audio equipment, how could I not mention these meters—in this case, analog needle meters like those found in 1980s gear? link, priced at $28.80.

This product is also audio-related to some extent: a switching power supply designed specifically for power amplifiers, link, priced at $69.00.

One more signal level meter. I bought one like this over a year ago, but still haven’t found the time to finish it properly. It comes with a basic little board for testing that it works. A transformer was also included — link, price $17.97

A kit of components and circuit boards for building a high-quality discrete stereo power amplifier, link, price $30.00

Another power supply, again intended for an amplifier, though it can actually be used for other things too. I think it would work well for powering adjustable converters. This PSU is unregulated, but that isn't necessary here, and its efficiency will be a little higher as a result — link, price $48.68

With digital terrestrial broadcasting now widespread and cheap used monitors readily available, converting them into TVs has become worthwhile. I reviewed a standard conversion board, and a review of a DVB board is nearly ready too. They are essentially the same, except that the latter can receive digital TV — link, price $18.99

A compact spot welder. The page has two versions with different power ratings, link, price $60.92 - 85.40

A real “all flash, no substance” kind of product: an ultra-compact adjustable PSU for a lot of money, but it really is compact, link, price $143.74 - 154.13

Cases for making lead-acid battery replacements using lithium batteries, link, price $9.81

Speaking of batteries, I came across some interesting strips for assembling battery packs. I can't vouch for them being pure nickel; I covered that in a review where I linked to a seller who really does sell nickel strips. But I liked the range of configurations here — link, price $4.50 - 80.00

On the subject of batteries, I'm thinking of buying some 90 Ah LiFePO4 batteries to try out. The reviews seem good, and lots of people have bought them — link, price $57.75

And of course, protection boards. These are the most popular models, link , price $2.80

Lots of options from one seller — link, prices $3.00 - 6.53

And heat-shrink tubing for assembling those same battery packs — link, prices $1.39 - 1.99

That's all for now. I'll try to find some more useful and interesting things in a week or so, but if you have examples of interesting products of your own, I'd be glad to see your links.
Questions and answers
What converters are featured in this roundup for electronics hobbyists?
The boost DC-DC converter takes 24–96 V and outputs 140 V at up to 15 A. The buck converter accepts 5–58 V, outputs 1.3–56 V, and supports up to 26–30 A.
What items for assembling battery packs are included?
The list includes cases for lithium replacements for lead-acid batteries, battery-building strips, protection boards, and heat-shrink tubing. The author is also considering trying 90 Ah LiFePO4 batteries.
What does the roundup say about the electronic load?
It is a basic 75 W electronic load. The author mentions having reviewed adjustable power supplies from the same manufacturer and says they can recommend this item.
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister

