/       /       /       /    24 V power supplies at a great price, plus various other products
Support the project on Patreon


24 V power supplies at a great price, plus various other products

$3.99
Go to store
Banggood is having some kind of July sale, so I’ll probably add interesting products here as I find them.
If the price differs from the one shown for any reason, check the shipping country. For example, in the case of CN and USA, the price below is lower when shipping from CN (China).

They’re selling 24 V power supplies for just $3.99. As far as I can tell, that’s an excellent price.
I reviewed the previous version. The new one has its own "quirks", but in my opinion, a price like this more than makes up for them — product link


They also sell excellent enclosures. I bought one and compared it with the equivalent in black. I can say for sure that the gray ones are better quality. They’re going for $6.99 — link.


There’s also a good price on cordless drills, starting at $21.99 — link.


A set of 3 carrot-shaped step drill bits for $3.65 — link


A small CNC machine for $150 — link.


The MUSTOOL MT108T multimeter will cost $9.99 with coupon 20MT108T — link


Another inexpensive power supply, this one rated for 12 V and housed in a metal case, for just $3.99. I once converted a power supply like this into a UPS, and as far as I know, several other people did the same after me, all successfully. The one I used was rated for 3 A, while this one is rated for 5 A, which is even better—you could make a 12 V UPS that can handle a 3–4 A load.
Product link.



A 20 A step-down converter. I bought one of these a while ago, but still haven’t gotten around to testing it. $5.99 — link


A transistor tester, a useful tool for beginners and not just radio amateurs. $6.99 — link


A powerful step-up converter, rated for up to 600 W. In reality, though, the output power depends on the input voltage and the converter’s maximum current (15 A). That means about 180 W at 12 V and around 360 W at 24 V. It costs $8.99 — link


And here’s a very interesting converter: from a 5 V input, it can provide an output from 0.5 to 30 V. It’s based on a SEPIC converter, so the output voltage can be either lower or higher than the input. There’s a version without an enclosure for $3.99 and one with an enclosure for $5.99. I ordered the enclosed version, but if the bare-board version had been available at the time, I would have gone for that one — link.
$3.99
Go to store
This page was found when searching for:
хороший отличный блок питания на 24 вольта из китая

Questions and answers

How much do the 24 V power supplies cost in the Banggood sale?

The article lists them at $3.99. The author notes caveats in the new version but says the price makes up for them.

Which 12 V power supply could be converted into a UPS?

The roundup includes a 12 V, 5 A power supply in a metal case for $3.99. The author previously converted a similar 3 A unit into a UPS and says this one could suit a 3–4 A load.

How much power can the boost converter in the roundup deliver?

It is advertised for up to 600 W, but the author estimates output from its input voltage and 15 A maximum current: about 180 W at 12 V and 360 W at 24 V.

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments1

Comments are published in their original language.

  1. 13 July 2019 01:19#1
    Что желательно сделать по мультиметру MUSTOOL MT108T, писАл на Муське. Продублирую здесь.
    Откалиброван был отлично. Желательно разобрать, смазать дорожки под «крутилку» и проверить ручную пайку «навесного оборудования» — гнезда под щупы, шунт, фонарик и т.п.  Отмываем флюс на этой ручной пайке.
     Проверил  калибровку DC (уточню) - за свои деньги, просто отлично. Совсем немного, линейно завышает напряжение.
    0,05V (в плюс), набегает при напряжение 32-33V - пять баллов, отлично.
    Можно смазать полигон под крутилку, вазелином. Я смазываю и ЦИАТИМом.
    Два режима подсветки. Если секунды 3-4 держать кнопку подсветки, то будет гореть постоянно. Родные щупы неплохие.
    А так, это тот же  HoldPeak HP-890CN (прозвонка и т.д).
    Доставка и БП 24V и мультиметра (Россия. Зап.Сибирь), была СДЕКом до квартиры (через Казахстан, потом Москва).
    0

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister