Vapcell N36 18650 3650mAh batteries
A reminder: to stay up to date with new blog posts, I recommend following me on Instagram, where I'll post notifications about every new topic and maybe write about something interesting now and then - link to my account
You can also subscribe to updates and new articles on the Telegram channel - https://t.me/KirichBlog
But these batteries are interesting for more than just their capacity. First, they're available in many local stores; second, they cost less there than on AliExpress; and third, I haven't tested them before.
The only catch is that if you buy them on AliExpress, they come with a case. In my opinion, though, it's not worth the extra cost.
Anyway, these batteries are easy to find online, and there are tons of stores. If you like them, I'm sure you'll find the best deal for yourself.

Specifications from the Vapcell website.
Model: N36
Size: 18.3±0.2*65.4±0.3mm
Typical Capacity: 3650mAh (0.2C discharge)
Min capacity: 3500mAh (0.2C discharge)
Nominal voltage: 3.60V
Max Continuous Discharge Current: 8A
Max Discharge Current: 15A for 5 seconds
End-of-charge voltage: 4.20V
End-of-discharge Voltage: 2.5V
Weight: 48g ( Appr)
Internal resistance: 25mΩ ( Appr) (AC 1kHz)
Standard Charge: 1000mA,CCCV 100mA cut-off
Quick Charge Current: 2500mA
Like many high-capacity Vapcell 18650 batteries, these are green. I don't know whether the color has anything to do with the capacity; it's just something I've noticed.

Dimensions and weight are nothing out of the ordinary.

They arrived charged to about 30–35%. The first cycle measured a capacity close to the claimed 3650mAh.

As usual, there are two specified charging modes: standard at 1 A and fast at 2.5 A.
Charging a high-capacity battery at 1 A is so tedious, I can't even tell you... But to be fair, the batteries accept the charge quite well, without an extended CV phase.

But trying to charge them at 2.5 A didn't go well: the charging curve is drawn out. Charging is faster, sure, but I'd recommend keeping the current to 1.5 A or less. Besides, that will extend the batteries' service life.

The product page has discharge curves at 0.5, 2, 5, 8, and 10 A.

But as always, I check capacity at more standard rates: 0.2, 0.5, 1, 1.5, and 2C, as well as the maximum specified current of 8 A.
And here I have to say that although the result fell a little short of 3650mAh, it was actually very close.

No complaints about heating either. Below are the temperatures at 7.3 and 8 A. Above, I showed the graph from the product page, which goes up to 10 A. I can say that I believe these batteries can handle that current without any problems, but keep in mind that running them like this will sharply shorten their service life.

The second battery's results are practically identical to the first one's.


Speaking of how closely their characteristics match, I can say they're practically identical. There's a slight difference at the maximum current, but up to that point, a perfect 5 out of 5.

Impedance after arrival, after “normalization,” and at the end. The value is pretty typical for high-capacity cells.

The product page also had a comparison graph, though a rather limited one: it compared the battery only with Panasonic and Samsung models.

I'll do a more extensive comparison, with 10 batteries in total, including the Vapcell N36.
1. Vapcell N36
2. Samsung INR18650-35E
3. LG INR18650-MJ1
4. LG INR18650-M36
5. Murata VC7
6. Panasonic NCR18650BD
7. Panasonic NCR18650G
8. Sanyo NCR18650GA
9. Vapcell F34
10. Vapcell F35
In the end, the Panasonic NCR18650G cells came closest to the N36 cells under review. They fell a little short, but I can put that down to measurement error. I originally wanted to find out which cells were used as donors for the ones under review, but the graph makes it clear that their performance is unlike that of any of the others, so they must be something new.

I should say that these are the capacity champions in the 18650 size—but not so fast. On the Vapcell website, I see cells rated at 3800 and even 4000 mAh, and I’m genuinely curious to test them.

My conclusions will be brief: these cells meet their stated specifications and are currently the highest-capacity 18650 cells I’ve ever had in my hands. I’d also note their excellent consistency and moderate heating, which makes them a good choice for high-capacity battery packs.
That’s all for now. I hope you found this useful.
vapcell n36, vapcell n36 inr18650
Questions and answers
What capacity did the Vapcell N36 18650 cells deliver in the test?
The first cycle measured about 3650 mAh. Discharge tests at different currents came in slightly below the stated figure, but remained close to it.
What charging current does the author recommend for Vapcell N36?
The 2.5 A charge did not work well, so the author recommends staying at or below 1.5 A. The cells charged normally at the standard 1 A rate.
How did Vapcell N36 perform at high discharge currents?
Heating was moderate at 7.3 A and 8 A. The author considers the cells suitable for high-capacity packs, while noting that high-current use shortens their service life.
The figures from this review are in the measurement database: Batteries
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments2
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister




Comments are published in their original language.