Vapcell T42 21700 4200mAh 35A batteries
Inspection, tests, graphs, comparisons, and conclusions—as usual.
As usual, a reminder: to keep up with new posts on the blog, I recommend following me on Instagram, where I'll post notifications about new articles and maybe write about something interesting now and then - link to my account
Everything here is the same as with the previous batteries: the packaging and even the second listing, which has a higher price. And by the way, as far as I can tell, this really is a new model; at least, I haven't found any reviews yet.

Specifications from the Vapcell page
Model: T42
Size: 21.5*70.1mm
Typical Capacity: 4200mAh (0.2C discharge)
Min capacity: 4000mAh (0.2C discharge)
Nominal voltage: 3.60V
Max Continuous Discharge Current: 35A
Max Discharge Current: 50A with 80°C cut
End-of-charge voltage: 4.20V
End-of-discharge Voltage: 2.5V
Weight: 70g ( Appr)
Internal resistance: 8mΩ ( Appr) (AC 1kHz)
Standard Charge: 4000mA,CCCV 100mA cut-off
Quick Charge Current: 8000mA
Nothing unusual here, really, except for some marking under the heat-shrink sleeve: LAB9L10501. The batteries may be genuine, but I can't recall seeing that marking on any other brand.

Dimensions and weight—nothing new here, as always.

The batteries arrived at about 30% charge. A “conditioning” run yielded around 4100mAh.

Two charging modes are offered: normal at 4A and fast at 8A. I tested only the first mode. The battery charged in 1 hour 15 minutes, but that seems a little slow to me for a high-current cell.

The manufacturer also ran tests, in six modes: 2, 10, 20, 30, 35, and 40A!

I don't have that many batteries, so I limited myself to the claimed 35A. The test sequence was 0.2, 0.5, 1C, 10, 15, 20, 25, 30, and 35A—9 tests in all.
Overall, the results are quite respectable. The only thing is, the batteries fell a little short of the claimed 4200mAh.

The temperatures are also well within range. Below are the results at 25, 30, and 35A.

The second sample produced comparable results.


After discharging at 35A, I measured the residual charge. To do this, I let the batteries cool to room temperature, then discharged them at 0.2C.
Both batteries delivered about the same capacity, 79 and 75mAh, which is quite normal.

I wouldn't say the characteristics are perfectly matched—I have seen better—but they are certainly at a decent level.

And, of course, as always, a comparison with the competition. First, the graphs from the Vapcell page.
First, against the Samsung 30T. Unfortunately, I didn't have any of those, and in my opinion there's little point in comparing 3Ah and 4.2Ah cells anyway.

The second comparison is a little more interesting: the T42 is plotted alongside the Samsung 40T and the equally well-known Molicel P42A. I had both of those batteries in my test “lab.”

For comparison, I used the same P42A and 40T, as well as the Vapcell G45. I considered including the K40 too, but it's essentially the same as the Samsung 40T. The only difference is that I tested the K40 at currents up to 30A, while the 40T was tested only up to 20A.
The batteries are quite similar to the P42A, but hold a higher voltage during discharge. The 40T falls a little further behind. But the difference is so small that I could easily put it down to, for example, measurement error.

The batteries' impedance before testing, after "conditioning," and at the end.

The images showing typical applications and certifications are the same as for the previous K29 cells.

All in all, these are pretty good batteries, at least based on the test results and comparison with their closest competitors. In my opinion, they perform great in terms of both current delivery and heat generation, and can easily be ranked alongside the Samsung 40T—or certainly the Molicel P42A.
The price, yes, is steep. I don't even want to comment on it, but that's definitely not my concern.
That's all for now. I hope you found this useful..
Questions and answers
What capacity did the Vapcell T42 21700 cells deliver?
A conditioning run measured about 4100 mAh, slightly below the claimed 4200 mAh. The two cells produced comparable results.
Can Vapcell T42 cells handle a 35 A discharge?
The author tested them at currents up to the specified 35 A and considered both the results and temperatures good. In the comparison, the T42 performed similarly to the Molicel P42A.
How long does it take to charge Vapcell T42 at 4 A?
The tested 4 A charging mode took 1 hour and 15 minutes. The author did not test the faster 8 A mode.
This model is included in the summary table: Battery comparison: measured capacity and resistance
The figures from this review are in the measurement database: Batteries
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister



