Motherboard for repairing a Toshiba Satellite L755D laptop
Read on for the rest of the story.
By a strange coincidence, two other laptops with almost the same problem came my way at the same time, but their owners got off with just a scare. In this case, though, the motherboard was beyond repair: corrosion had eaten away some traces and components near the graphics chip, as well as in a few other, less critical areas. The laptop still heroically booted Windows, complete with sound, but there was no video on the screen or on the external monitor output.
The chip could still have been replaced, but repairing traces on a multilayer board and figuring out which components had been there before they evaporated off the board is a job for a masochist.
Since I’m not one, I said the whole motherboard would have to be replaced. I gave him a rough idea of prices on AliExpress, he gave me the go-ahead, and I ordered a board from one of the sellers.
Of course, I could have looked for one at local salvage shops, but my experience with local sellers of this kind of thing is that they understand you perfectly right up until you hand over the money. After that, they understand Russian even less than the Chinese do, and if anything goes wrong, they just say, “Me no understand you.”
But let me stick to the story.
The seller turned out to be very attentive and answered all my questions. When I said I wanted to place an order, he first asked for the motherboard’s name and part number, then asked me to send him some photos. It took a few tries to get them through, but eventually he received them and confirmed that he had exactly the same motherboard. He did mention that the end of the series number might be different, but said that wasn’t critical.
I placed the order and paid, and the seller sent the package by Hong Kong Post. About two weeks after ordering, I had the box with the board in my hands.
The box was wrapped in standard yellow tape. Inside, the board was buried under layer upon layer of bubble wrap. A frugal person could have wrapped ten boards in that much bubble wrap.
In short, it would have been hard to damage it in transit, although somehow one corner of the box had been pushed in a little.
The board itself was in an antistatic bag.
It looks great, with no trace of dust.
There’s a protective film on the back, and all the necessary brackets are in place under the processor and graphics chip.
After admiring the board, I got started on the replacement. I needed to confirm the order, after all, and I still didn’t know whether everything was in order. The board was used, but clearly not refurbished; I couldn’t see any signs of tampering, even though I inspected it very carefully.
I opened up the burned-out laptop.
You can see the burned areas on the board. My camera is pretty old, so apologies for the photo quality. There are actually more damaged spots; these were just the most obvious ones. I don’t think a board in this condition is repairable. Even if it could theoretically be restored, I doubt it would last long, and the chances of repairing it were close to zero anyway.
There’s practically no difference between the original board and the one I bought. A couple of components look different, as do the capacitor colors and the processor socket latch.
Next, I removed the cooling system.
After that, I cleaned the cooling system, CPU, and GPU of the old thermal compound, which had hardened a little over time.
I applied our tried-and-tested KPT-8. There are better thermal pastes, of course, but I'm more used to this one—and this particular batch is pretty good quality (I've come across fakes before).
I put the cooling system back in place (the main thing is to remember to lock the socket after installing the CPU), after cleaning the dust out of it. Then I put the board back in the case.
By the way, at this stage it's held in place by just three screws on this laptop model: two for the board and one for the fan.
Next, I put the top cover back on and tightened the screws (fortunately, Toshiba's engineers did a good job here too: all the screws are the same length, so there was no need to remember which one went where).
I tightened the screws on the back, installed the RAM, Wi-Fi module, and hard drive, and connected the power cable from the side jack.
And that's the main part of the process, basically.
I deliberately didn't dwell on the details of disassembly and reassembly, since every laptop is different. But there are a few things worth keeping in mind when repairing any laptop.
Always disconnect the battery before disassembling the laptop.
Keep track of what you're unscrewing and where it came from. Don't be lazy about taking photos, making notes, or drawing diagrams. Screws can differ not only in diameter but also in length, which is usually critical. Manufacturers often mark the screw sizes, but there are exceptions.
The cooling system mounting frame usually even has the screw-tightening order printed on it; remove the screws in reverse order.
Handle connectors carefully. In my opinion, one of the most awkward connectors in a laptop is the display connector. When disconnecting or reconnecting it, I usually use a sharp-tipped pair of tweezers to help ease it out. Be careful with the tweezers—you can easily knock off several components.
Almost everything in a laptop comes apart very easily (except for the clips that hold the two halves of the case together and the ones securing the keyboard). If something won't come out or come apart, check whether you forgot to disconnect a connector or remove a screw. There are usually lots of them, and they can be in the most unexpected places.
As you take the laptop apart and remove components, it will become unstable on the table and may tip toward the screen, since that side will be heavier. Be careful.
When ordering a laptop motherboard, you need the board's full model name, revision, and part number, since laptop motherboards are highly specific. Even a one-letter difference can mean the board won't fit.
Well, the laptop is assembled and tested under load. Naturally, I couldn't resist visiting Muska after setting up the internet connection.
By the way, you can see the review that was deleted in this photo (when I logged in from my own computer, it was already gone, but I didn't bother retaking the photo. I think you'll believe me that it's the original site. :)
Screenshots of the motherboard and integrated graphics tabs in CPU-Z


This review isn't a guide to replacing a motherboard (as I mentioned above, laptops can differ quite a bit), but it shows that replacing one isn't very difficult. The main thing is to work carefully.
Also, if you spill something on your laptop—especially juice, coffee, beer, or the like, rather than water—disconnect the power and battery as quickly as possible (people sometimes forget the battery), then dry it out and clean the areas where the liquid got in with alcohol. Some laptops can withstand this, of course, such as Panasonic models in the rugged range and some Lenovo workstations (they even have holes on the underside for liquid to drain out), but those are rare.
The consequences are shown in this review. Usually there are three options: repair the original board (expensive and not always a lasting fix), replace the motherboard (even more expensive, but usually more durable), or buy a new laptop.
Summary.
Pros.
The board works perfectly.
Judging by its appearance, this particular board is not refurbished; it has simply been removed from another laptop.
Excellent packaging and delivery; no complaints at all.
The seller's service was impressive. They answered all my questions very promptly, even though it was already evening for them, asked me to send photos to confirm that the motherboard matched, and shipped it on time.
I now have some extra parts for various projects, though that's not really relevant to the product. :)
Cons
Probably the price. I found sellers offering it for less, but their ratings put me off a little. This seller had a good rating and a wide selection, so I ordered from them.
I hope my review helped someone, and I hope you'll be careful with your laptops so you won't have to deal with what I described above.
P.S. I don't repair laptops, at least not professionally.
toshiba l655 schema, toshiba l655 схема, материнская плата ноутбука toshiba описание, toshiba satellite l755d-a1k материнская плата, как выглядит микропроцессор используемый в плате iskaa la-3481p ноутбука тошиба, материнская плата nalae la6053p ноутбук тошиба сателлит l675d 111, материнская плата для тошиба сателлит l755, какая материнская плата стоит на ноутбуке toshiba satellite l50d a k8s, l755d 11w toshiba материнская плата, toshiba satellite l755 материнская плата купить, плата satellite l755 2gb nvidia, тошиба сателлит л755д 11w апгрейд, system board toshiba satellite l755d 11w, nokotion для toshiba satellite l750 l755 материнская плата для ноутбука hm65 ddr3 a000081420 a000080670 a000080800 da0blbmb6f0 основная плата, название материнской платы у ноутбука toshiba satellite l755d, тошиба сателлит l750 комплект винтов, материнская плата toshiba satellite l675d 111, маркировка южного моста ноутбука тошиба сателлите u400, материнская плата тошиба сателлит л755д, тошиба сателлит l750 руководство по ремонту, материнская плата в toshiba satellite l750, замена материнской платы в toshiba satellite l655 на l750, toshiba satellite l750 134 какая материнская плата, материнская плата тошиба саттелит л755д 140, satellite l750 1me материнская плата
Questions and answers
Did the replacement Toshiba Satellite L755D motherboard work?
Yes, it worked fully after installation. It appeared to be a pulled board rather than a refurbished one.
How was the original Toshiba Satellite L755D motherboard damaged?
Juice was spilled on the laptop, and corrosion damaged traces and components near the video chip and elsewhere. Windows still booted, but there was no image on either the laptop screen or an external monitor.
What does the author recommend if liquid gets into a laptop?
Disconnect power and the battery as quickly as possible, then dry and clean the affected areas with alcohol. During disassembly, keep track of the screws and connectors and handle them carefully.
The figures from this review are in the measurement database: Other devices
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister
















