Colored Button Caps
$6.99 ($4.99)
When I was thinking about how to start this review, for some reason I kept remembering buttons made from LEDs, faulty MP-series transistors, and the like. Back then, you couldn't just buy anything, so you had to improvise. Even now, many years later, the first thing I do when preparing various electronics for disposal is remove the buttons, knobs, and other similar parts. They're usually all mixed together, but you still think, maybe they'll come in handy somewhere.
I found some examples of similar DIY plungers online. In the first example, an LED is also used as an indicator, but the idea is pretty much the same. The trick was that both LEDs and transistors have a rim that kept the improvised button from falling out.

The buttons come loose in a small zip-lock bag. I could complain that there's no little box to sort them by color, of course, but would that be worth the extra cost?

The package was supposed to contain 140 pieces, with
7 additional colors, 20 pieces of each color
In fact, I got 151:
20 black
17 white
21 gray
23 blue
27 red
22 yellow
21 green.
Only the white ones came up short, but overall there were 11 more than advertised, which is certainly nice.

No complaints about the plastic or molding quality. The fronts are smooth, bright, and almost mirror-like; the backs have clips for attaching them to the buttons. There are no burrs or flash.

Dimensions:
The button itself is about 11.5 mm in diameter, so the hole can be up to 12 mm.
The rim is 13 mm in diameter. The button is 5.7 mm thick including the rim, and the rim itself is 1.36 mm thick, so the part that protrudes is about 4.4 mm.
I use these buttons on enclosures with plastic panels about 2–3 mm thick, and they work well.

Here, the cap is used with buttons specifically designed for it, which have a square plunger.
While I was getting the buttons out to test them, I came across some others in the same place. They're shown above and are designed to hold LEDs in the plunger. Has anyone come across these exact ones?

They fit the buttons perfectly, with no play or wobble, and once installed they feel almost like one piece.

An example of how to use them.
Sure, someone might say it's all too bright and looks like a parrot, but sometimes color helps with operation: you can highlight the buttons you need to make the device easier to use.

Here's another example. The small ones are at the top, and the ones from this review are at the bottom. Here, the button functions are highlighted with color.

There are also square buttons. I think they'd look better in a device, but they're a little harder to install, and a false front panel is best. For some reason, they're also more expensive: $8 for the same 140 pieces — link.

I'll keep the conclusion short: I like these caps. They're smooth and neatly made, fit the buttons securely, and come in a wide range of colors. If the price works for you, go for it.
The store provided a discount. With the coupon BG4d9ff7, the price will be $4.99 through September 30, though I think they could have cut it even more.
That's all for now. I hope this was useful, and maybe someone will share some alternative button plunger designs in the comments.
$6.99 ($4.99)
Questions and answers
How many colored caps for tactile buttons came in the pack?
The author counted 151 instead of the stated 140, in seven colors, with 17 to 27 caps of each color.
What are the dimensions of the colored button caps?
The cap is about 11.5 mm in diameter and its rim is 13 mm across. The total thickness with the rim is 5.7 mm; the author uses a mounting hole up to 12 mm.
Do the caps stay securely on tactile buttons?
Yes. The author says they fit without looseness or wobbling. Their colors can help distinguish controls and make a device easier to use.
The figures from this review are in the measurement database: Other devices
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister



