Nichicon, Epcos and Elna, or how I bought capacitors on Taobao
I originally planned to publish this review much later, in the “first come, first served” order, but as they say, good news should be shared quickly and bad news even faster, so I decided to post it early.
So today’s review covers five types of capacitors from well-known manufacturers—or:
Have you stepped on a rake?
We walk on them all the time!
Not long ago, I reviewed an amplifier board and mentioned that I was short on high-capacitance electrolytic capacitors at home. But in fact, they were already on their way to me. I ordered them mainly as an experiment, even though my friends tried to talk me out of it. But you remember your own mistakes best, so today I’m sitting here writing this review to share my “rakes” with others.
So, this review features five types of capacitors from three well-known companies (according to the sellers).
1. 16 V, 1000 µF ELNA gold RJH Japan — price per piece: $0.06, link
2. 35 V, 7400 µF ELNA RJD — price per piece: $0.86, link
3. 35 V, 3800 µF EPCOS SIKOREL 125 — price per piece: $1.48, link
4. 35 V, 22000 µF Nichicon LS (M) — price per piece: $1.69, link
5. 50 V, 10000 µF Nichicon audio KG Type II — price per piece: $5.0, link

I had no complaints about the forwarding agent. Everything was packed in separate bags, and the large capacitors were placed with their leads facing away from each other to avoid scratching the cases.

Part One: The Rainbow
16 V, 1000 µF ELNA gold RJH Japan
The capacitors will be covered in the same order as listed above, so I’ll start with the smallest and cheapest: ELNA gold RJH, rated at 1000 µF and 16 V, 105°C.
First, a photo from the seller’s page.

What I received looked just like what I ordered. In this case, the price caught my eye: just 6 cents apiece. I bought six to try out.

But the series marking is actually RJJ, not RJH. The seller’s photo also shows RJJ, so I don’t know why the description says otherwise. Accordingly, the information below is from the RJJ datasheet.
For context, both types belong to the same series, but RJH is Extra Low Impedance, while RJJ is Low Impedance.

1. As stated in the description, the marking is gold on a brown background.
2. They look perfectly normal.
3, 4. The dimensions match the stated 10×30 mm.
5. I don’t know how much a capacitor like this should weigh, so I’m including the information just in case.
6. On some capacitors, the leads look a little odd near the base, although this isn’t noticeable in person—only in the photo.

Capacitor specifications based on the datasheet I found.

The measured results are reasonably good overall, and the variation isn’t too large, although you’d expect better from components from the same batch.
Here and in the measurement photos that follow, there’s also a test at 7.8 kHz. In this mode, the meter doesn’t display capacitance because of a limitation of the instrument itself, but it does measure ESR, and the reading seems quite accurate to me.

35 V, 7400 µF ELNA RJD
The second type is also an ELNA, but from the RJD series.

They look just like the seller’s photos—neat, although the sleeve is a little scratched.

The dimensions are a little trickier here, since I couldn’t find specifications for these exact capacitors. More on that later; the datasheet for the RJD series is here.

The capacitance immediately made me uneasy. I understand that new capacitors usually measure a little above their rated value, but a little—not 15%. By the way, the seller’s product description also says:
Roughly speaking, our capacitors are the most capacitor-like capacitors in the world, which is why their capacitance is much higher. :)

35 V 3800 µF EPCOS SIKOREL 125
I liked these capacitors simply for their appearance. They really do look beautiful, and their negative terminal is star-shaped, just like the domestic capacitors I saw a very long time ago.
I ordered them just for their looks. :)

They look even better in person. According to the seller, this is the Sikorel 125 series, where the number indicates the operating temperature in degrees Celsius.

But according to the datasheet, they can operate at up to 140 degrees, although their service life drops to 2000 hours.

They look perfectly fine, and their dimensions match the datasheet specifications.

For the 35 V 3800 µF capacitors, the specified ESR is 35 mΩ at 100 Hz and 17 mΩ at 10 kHz.

In reality, I got an even better result, and it was quite consistent from one sample to the next.

35 V 22000 µF Nichicon LS (M)
Next up are high-capacitance, compact capacitors that, according to the seller, are specifically intended for audio applications.
Nichicon LS (M) series.

But according to the datasheet, these are ordinary general-purpose capacitors.


And according to the description of the neighboring series, not a single one is intended for audio at all.

The lead spacing is unusually small to me—just about 10 mm—which looks quite striking on a case with a 35 mm diameter.

I could only measure the capacitance at 100 Hz, and it falls a little short of the specified 22000 µF.

50 V 10000 µF Nichicon audio KG Type II
The last, fifth type of capacitor is definitely specified for audio: the fairly well-known Nichicon KG Gold Tune Type II series.

And yes, the datasheet says these capacitors are intended for audio applications, so that's all above board.
There are three types of capacitors:
1. Type-I—for those who have graduated from music lovers to audiophiles
2. Type-II—for those who haven't sold everything yet to buy a new amplifier and a power conditioner for n thousand dollars
3. Type-III—well, these are probably for people who carve stands for their new cables. :)
Of course I'm joking, but the basic idea remains: Type I is the most basic, and Type III is the highest quality. I bought Type II, so it's somewhere in between.

They definitely look impressive: gold paint, a black case, the words Gold Tune. All that's missing is a bottle of cognac to celebrate. :)

The case diameter and lead spacing are the same as on the Nichicon LS series; they're just 5 mm taller.

Honestly, I was quite surprised to see that the two samples were almost identical in every respect. I even thought I was testing the same capacitor twice.

The final test involved applying an overvoltage to the capacitors: 20 V to the 16 V capacitor, 40 V to the 35 V one, and 55 V to the 50 V one, for about 15 minutes.

All the test subjects handled this test without any trouble. Once the set voltage was reached, the current dropped to zero—or, more precisely, below 1 mA—and stayed there for the entire test.
The current was limited to 10 mA (last photo), so I wasn't really risking anything. That's why I recommend testing capacitors in exactly this mode, i.e. with current limiting.

Part two: the sad part.
Everything seems great, but now I’m going to show that it’s not at all, starting with the 35 V, 7400 µF ELNA RJD capacitor—the blue ones.
Let’s open the datasheet for this capacitor series. First, we see that capacitors in this series should have black cases, not blue ones.

What’s more, this series doesn’t include any 7400 µF capacitors at all. It has 6800 and 8200 µF models, but no 7400 µF ones.
This is one way to check whether a capacitor is genuine: open the datasheet, check the dimensions, and make sure the capacitor in question is listed in the series datasheet.
The 35 V, 7400 µF ELNA RJD capacitors are definitely fake.

Moving on to the beautiful Epcos capacitors. I really liked the look of them, but it turned out there was more to the story.
First, let’s look at the capacitor’s marking. In this case, it’s B41790-S7388-Q1.

Yes, Epcos—or rather, TDK now—does make capacitors with these dimensions, capacitance, voltage, appearance, and other specifications. But, as always, there’s a catch: the actual part number is B41790-A7388-Q001. The letter S doesn’t appear in the part numbers for this series at all.

I was also suspicious about the difference between Q001 in the table and Q1 on the capacitor, but it turns out that’s perfectly normal—the manufacturer simply abbreviates the part number that way.
The 35 V, 3800 µF EPCOS SIKOREL 125 capacitors are definitely fake.

And what about the 22000 µF Nichicon LS capacitors? They’re listed in the datasheet, match the dimensions, and have no other visible markings.
Unfortunately, this is something you can only see after buying them, but it’s very obvious. As soon as I picked these capacitors up, I felt something was off. One of them behaved in an extremely “eccentric” way, and they also felt far too light. I don’t have any reliable information about the latter, though, so I can’t compare.
Another confirmation was that the second capacitor was much better balanced. I could have taken them apart, of course, but since the capacitors themselves work fine, I felt bad about doing that. I’ll just use them in non-critical applications or for testing.

Yes, yes, yes—you guessed it: this is most likely exactly how it works.

In reality, though, few manufacturers would put an entirely different capacitor inside. That’s expensive; usually, they only use the guts from cheaper capacitors.
To keep the capacitance the same (which is easy to check), they use models rated for a lower voltage. For example, the standard voltage series is 6.3, 10, 16, 25, 35, 40, 50, 63, 80, 100 V, and so on. The highlighted voltage ratings are less common than the others. In other words, the “counterfeiter” uses a capacitor rated one step lower: 25 V instead of 35 V, or 50 V instead of 63 V. That’s their idea of “saving money.”
A genuine manufacturer wouldn’t do this. Even if they made the capacitor more compact—which is very difficult—they’d simply use a case one size smaller. Otherwise, what’s the point of “selling air”?
Below is an example of counterfeit Samwha capacitors (photo from the internet). I haven’t come across anything like this myself so far, though I buy capacitors offline from trusted suppliers.

Unfortunately, the Nichicon audio KG Type II behaved the same way. What’s more, the two capacitors in this pair behaved almost identically, with the same imbalance in roughly the same direction.

At the many readers' request, I took apart the Nichicon audio KG Type II capacitor. As expected, it wasn't a “matryoshka” of nested capacitors, just paper and foil.

The leads are riveted on.

Video version of the review
Part three: some disappointing conclusions.
Of the five capacitors featured in this review, three are 100% fakes:
35 V, 7400 µF ELNA RJD — the manufacturer's catalog lists no capacitor with this capacitance and color.
35 V, 3800 µF EPCOS SIKOREL 125 — the manufacturer's catalog lists no capacitor with this series marking (S).
35 V, 22000 µF Nichicon LS (M) — its behavior is wildly “eccentric.” I wonder, will the music sound more eccentric too?
One type is about 98% likely to be fake: the 50 V, 10000 µF Nichicon audio KG Type II.
On the one hand, it has almost the same imbalance and lightweight case as the Nichicon LS, but two of the capacitors have very similar specs. They even have the same imbalance, shifted to the same side.
The only type out of the five that I couldn't prove was fake is the cheapest one: 16 V, 1000 µF ELNA gold RJH.
These capacitors “look like a duck, quack like a duck, and fly like a duck,” but that doesn't mean they're genuine. As the saying goes: if you're still free, that's not thanks to you—it's because we haven't done our job properly.
This review was sponsored by the purchasing agent yoybuy.com, which covered the shipping costs.
The prices of the capacitors are listed above. The review also gives the weight of the components. Shipping costs from the agent depend on various factors, such as the quantity and whether there are other items in the order.
That's all from me. I hope this review was useful and helps you avoid the same pitfalls. As usual, I look forward to your questions in the comments.
So today’s review covers five types of capacitors from well-known manufacturers—or:
Have you stepped on a rake?
We walk on them all the time!
Not long ago, I reviewed an amplifier board and mentioned that I was short on high-capacitance electrolytic capacitors at home. But in fact, they were already on their way to me. I ordered them mainly as an experiment, even though my friends tried to talk me out of it. But you remember your own mistakes best, so today I’m sitting here writing this review to share my “rakes” with others.
So, this review features five types of capacitors from three well-known companies (according to the sellers).
1. 16 V, 1000 µF ELNA gold RJH Japan — price per piece: $0.06, link
2. 35 V, 7400 µF ELNA RJD — price per piece: $0.86, link
3. 35 V, 3800 µF EPCOS SIKOREL 125 — price per piece: $1.48, link
4. 35 V, 22000 µF Nichicon LS (M) — price per piece: $1.69, link
5. 50 V, 10000 µF Nichicon audio KG Type II — price per piece: $5.0, link

I had no complaints about the forwarding agent. Everything was packed in separate bags, and the large capacitors were placed with their leads facing away from each other to avoid scratching the cases.

Part One: The Rainbow
16 V, 1000 µF ELNA gold RJH Japan
The capacitors will be covered in the same order as listed above, so I’ll start with the smallest and cheapest: ELNA gold RJH, rated at 1000 µF and 16 V, 105°C.
First, a photo from the seller’s page.

What I received looked just like what I ordered. In this case, the price caught my eye: just 6 cents apiece. I bought six to try out.

But the series marking is actually RJJ, not RJH. The seller’s photo also shows RJJ, so I don’t know why the description says otherwise. Accordingly, the information below is from the RJJ datasheet.
For context, both types belong to the same series, but RJH is Extra Low Impedance, while RJJ is Low Impedance.

1. As stated in the description, the marking is gold on a brown background.
2. They look perfectly normal.
3, 4. The dimensions match the stated 10×30 mm.
5. I don’t know how much a capacitor like this should weigh, so I’m including the information just in case.
6. On some capacitors, the leads look a little odd near the base, although this isn’t noticeable in person—only in the photo.

Capacitor specifications based on the datasheet I found.

The measured results are reasonably good overall, and the variation isn’t too large, although you’d expect better from components from the same batch.
Here and in the measurement photos that follow, there’s also a test at 7.8 kHz. In this mode, the meter doesn’t display capacitance because of a limitation of the instrument itself, but it does measure ESR, and the reading seems quite accurate to me.

35 V, 7400 µF ELNA RJD
The second type is also an ELNA, but from the RJD series.

They look just like the seller’s photos—neat, although the sleeve is a little scratched.

The dimensions are a little trickier here, since I couldn’t find specifications for these exact capacitors. More on that later; the datasheet for the RJD series is here.

The capacitance immediately made me uneasy. I understand that new capacitors usually measure a little above their rated value, but a little—not 15%. By the way, the seller’s product description also says:
fever capacitor instead of 6800UF, capacity over 8500UF
Roughly speaking, our capacitors are the most capacitor-like capacitors in the world, which is why their capacitance is much higher. :)

35 V 3800 µF EPCOS SIKOREL 125
I liked these capacitors simply for their appearance. They really do look beautiful, and their negative terminal is star-shaped, just like the domestic capacitors I saw a very long time ago.
I ordered them just for their looks. :)

They look even better in person. According to the seller, this is the Sikorel 125 series, where the number indicates the operating temperature in degrees Celsius.

But according to the datasheet, they can operate at up to 140 degrees, although their service life drops to 2000 hours.

They look perfectly fine, and their dimensions match the datasheet specifications.

For the 35 V 3800 µF capacitors, the specified ESR is 35 mΩ at 100 Hz and 17 mΩ at 10 kHz.

In reality, I got an even better result, and it was quite consistent from one sample to the next.

35 V 22000 µF Nichicon LS (M)
Next up are high-capacitance, compact capacitors that, according to the seller, are specifically intended for audio applications.
Nichicon LS (M) series.

But according to the datasheet, these are ordinary general-purpose capacitors.
And according to the description of the neighboring series, not a single one is intended for audio at all.
The lead spacing is unusually small to me—just about 10 mm—which looks quite striking on a case with a 35 mm diameter.

I could only measure the capacitance at 100 Hz, and it falls a little short of the specified 22000 µF.

50 V 10000 µF Nichicon audio KG Type II
The last, fifth type of capacitor is definitely specified for audio: the fairly well-known Nichicon KG Gold Tune Type II series.

And yes, the datasheet says these capacitors are intended for audio applications, so that's all above board.
There are three types of capacitors:
1. Type-I—for those who have graduated from music lovers to audiophiles
2. Type-II—for those who haven't sold everything yet to buy a new amplifier and a power conditioner for n thousand dollars
3. Type-III—well, these are probably for people who carve stands for their new cables. :)
Of course I'm joking, but the basic idea remains: Type I is the most basic, and Type III is the highest quality. I bought Type II, so it's somewhere in between.
They definitely look impressive: gold paint, a black case, the words Gold Tune. All that's missing is a bottle of cognac to celebrate. :)

The case diameter and lead spacing are the same as on the Nichicon LS series; they're just 5 mm taller.

Honestly, I was quite surprised to see that the two samples were almost identical in every respect. I even thought I was testing the same capacitor twice.

The final test involved applying an overvoltage to the capacitors: 20 V to the 16 V capacitor, 40 V to the 35 V one, and 55 V to the 50 V one, for about 15 minutes.

All the test subjects handled this test without any trouble. Once the set voltage was reached, the current dropped to zero—or, more precisely, below 1 mA—and stayed there for the entire test.
The current was limited to 10 mA (last photo), so I wasn't really risking anything. That's why I recommend testing capacitors in exactly this mode, i.e. with current limiting.

Part two: the sad part.
Everything seems great, but now I’m going to show that it’s not at all, starting with the 35 V, 7400 µF ELNA RJD capacitor—the blue ones.
Let’s open the datasheet for this capacitor series. First, we see that capacitors in this series should have black cases, not blue ones.

What’s more, this series doesn’t include any 7400 µF capacitors at all. It has 6800 and 8200 µF models, but no 7400 µF ones.
This is one way to check whether a capacitor is genuine: open the datasheet, check the dimensions, and make sure the capacitor in question is listed in the series datasheet.
The 35 V, 7400 µF ELNA RJD capacitors are definitely fake.

Moving on to the beautiful Epcos capacitors. I really liked the look of them, but it turned out there was more to the story.
First, let’s look at the capacitor’s marking. In this case, it’s B41790-S7388-Q1.

Yes, Epcos—or rather, TDK now—does make capacitors with these dimensions, capacitance, voltage, appearance, and other specifications. But, as always, there’s a catch: the actual part number is B41790-A7388-Q001. The letter S doesn’t appear in the part numbers for this series at all.

I was also suspicious about the difference between Q001 in the table and Q1 on the capacitor, but it turns out that’s perfectly normal—the manufacturer simply abbreviates the part number that way.
The 35 V, 3800 µF EPCOS SIKOREL 125 capacitors are definitely fake.

And what about the 22000 µF Nichicon LS capacitors? They’re listed in the datasheet, match the dimensions, and have no other visible markings.
Unfortunately, this is something you can only see after buying them, but it’s very obvious. As soon as I picked these capacitors up, I felt something was off. One of them behaved in an extremely “eccentric” way, and they also felt far too light. I don’t have any reliable information about the latter, though, so I can’t compare.
Another confirmation was that the second capacitor was much better balanced. I could have taken them apart, of course, but since the capacitors themselves work fine, I felt bad about doing that. I’ll just use them in non-critical applications or for testing.

Yes, yes, yes—you guessed it: this is most likely exactly how it works.

In reality, though, few manufacturers would put an entirely different capacitor inside. That’s expensive; usually, they only use the guts from cheaper capacitors.
To keep the capacitance the same (which is easy to check), they use models rated for a lower voltage. For example, the standard voltage series is 6.3, 10, 16, 25, 35, 40, 50, 63, 80, 100 V, and so on. The highlighted voltage ratings are less common than the others. In other words, the “counterfeiter” uses a capacitor rated one step lower: 25 V instead of 35 V, or 50 V instead of 63 V. That’s their idea of “saving money.”
A genuine manufacturer wouldn’t do this. Even if they made the capacitor more compact—which is very difficult—they’d simply use a case one size smaller. Otherwise, what’s the point of “selling air”?
Below is an example of counterfeit Samwha capacitors (photo from the internet). I haven’t come across anything like this myself so far, though I buy capacitors offline from trusted suppliers.

Unfortunately, the Nichicon audio KG Type II behaved the same way. What’s more, the two capacitors in this pair behaved almost identically, with the same imbalance in roughly the same direction.

At the many readers' request, I took apart the Nichicon audio KG Type II capacitor. As expected, it wasn't a “matryoshka” of nested capacitors, just paper and foil.

The leads are riveted on.

Video version of the review
Part three: some disappointing conclusions.
Of the five capacitors featured in this review, three are 100% fakes:
35 V, 7400 µF ELNA RJD — the manufacturer's catalog lists no capacitor with this capacitance and color.
35 V, 3800 µF EPCOS SIKOREL 125 — the manufacturer's catalog lists no capacitor with this series marking (S).
35 V, 22000 µF Nichicon LS (M) — its behavior is wildly “eccentric.” I wonder, will the music sound more eccentric too?
One type is about 98% likely to be fake: the 50 V, 10000 µF Nichicon audio KG Type II.
On the one hand, it has almost the same imbalance and lightweight case as the Nichicon LS, but two of the capacitors have very similar specs. They even have the same imbalance, shifted to the same side.
The only type out of the five that I couldn't prove was fake is the cheapest one: 16 V, 1000 µF ELNA gold RJH.
These capacitors “look like a duck, quack like a duck, and fly like a duck,” but that doesn't mean they're genuine. As the saying goes: if you're still free, that's not thanks to you—it's because we haven't done our job properly.
This review was sponsored by the purchasing agent yoybuy.com, which covered the shipping costs.
The prices of the capacitors are listed above. The review also gives the weight of the components. Shipping costs from the agent depend on various factors, such as the quantity and whether there are other items in the order.
That's all from me. I hope this review was useful and helps you avoid the same pitfalls. As usual, I look forward to your questions in the comments.
This page was found when searching for:
nichicon ls 6800мкв 56в отзывы, что можно сделать из электролитических конденсаторов, 2, лучший бренд конденсаторов 2025 года на алиэкспресс, подлинность электролитического конденсатора, официальный сайт серии конденсатор elna, как проверить подлинность nichicon fw конденсатора, лучшие электролитические конденсаторы с алиэкспресс, nichicon bp-p отзывы, на сколько хороши кондесаторы nichicon с aliexpress, ничикон золотистые, электролитический конденсатор ce w, конденсаторы low esr на aliexpress, конденсатор elna для цепей питания, nichicon fw esr конденсатора, elna ce-w 15000 mf 63v, электролитические конденсаторы epcos официальный сайт, конденсаторы с действительно низким еср алиэкспресс, фирма качественных конденсаторы с алиэкспресс, конденсатор urz nichicon для чего используется, поддельный nichicon, test esr nichicon fw fg 100uf, тест китайских конденсаторов wima, конденсаторы elna 10000мкф 63в отзывы, чем хорош nichicon, конденсаторы Nichicon, конденсаторы Epcos, конденсаторы Elna, отзывы о конденсаторах, тест конденсаторов
nichicon ls 6800мкв 56в отзывы, что можно сделать из электролитических конденсаторов, 2, лучший бренд конденсаторов 2025 года на алиэкспресс, подлинность электролитического конденсатора, официальный сайт серии конденсатор elna, как проверить подлинность nichicon fw конденсатора, лучшие электролитические конденсаторы с алиэкспресс, nichicon bp-p отзывы, на сколько хороши кондесаторы nichicon с aliexpress, ничикон золотистые, электролитический конденсатор ce w, конденсаторы low esr на aliexpress, конденсатор elna для цепей питания, nichicon fw esr конденсатора, elna ce-w 15000 mf 63v, электролитические конденсаторы epcos официальный сайт, конденсаторы с действительно низким еср алиэкспресс, фирма качественных конденсаторы с алиэкспресс, конденсатор urz nichicon для чего используется, поддельный nichicon, test esr nichicon fw fg 100uf, тест китайских конденсаторов wima, конденсаторы elna 10000мкф 63в отзывы, чем хорош nichicon, конденсаторы Nichicon, конденсаторы Epcos, конденсаторы Elna, отзывы о конденсаторах, тест конденсаторов
Questions and answers
Which capacitors in the review did the author identify as fakes?
He identified the ELNA RJD 35 V 7400 mAh, EPCOS SIKOREL 125 35 V 3800 mAh, and Nichicon LS (M) 35 V 22000 mAh as fakes. He judged the Nichicon KG Type II 50 V 10000 mAh to be about 98% likely fake.
Could the author confirm that the ELNA gold 16 V 1000 mAh capacitors were genuine?
No. They looked plausible, but he could not prove they were genuine. The casing says RJJ, although the seller’s description said RJH.
What is the Nichicon KG Gold Tune Type II intended for?
According to its datasheet, the series is intended for audio applications. However, the author concluded that the samples he bought were probably counterfeit.
Calculate manuallyAll calculators
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments10
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister




Comments are published in their original language.