Somewhat unusual 33140 15 Ah LiFePO4 batteries
A reminder: to keep up with new posts on the blog, I recommend following me on Instagram, where I’ll post notifications about every new article and maybe write about something interesting too — link to the account
You can also subscribe to updates and new articles on the Telegram channel — https://t.me/KirichBlog
There are three types of batteries, but one type didn’t interest me at all (you’ll see why later), one was so-so, and one was very interesting. But, as in that old joke: “You can’t have a new fur coat until you’ve eaten this old, torn sock.”
I’ll post the reviews in that same order, starting with the least interesting (to me) cells, size 33140.
There’s no recognizable brand marking on the heat-shrink sleeve, just some numbers I don’t understand. Those numbers are what threw me off, because I remembered having something similar, but in a slightly different size.

They look exactly like the Gotion 33140 cells, with the same copper terminals and the same markings. By the way, I noticed that the terminals are positioned the same way relative to the axis of the case, not just placed randomly. Maybe that’ll be useful to someone.
The only marking I can make sense of is the capacity in watt-hours: 40 Wh, which works out to 15 Ah at 3.2 V.

And here’s what threw me off: for some reason, the cells were marked 36135. I can sort of understand the 135—it’s clearly the length of the case without the terminals, while the total length is 140 mm—but what does the 36 mean?
They weigh the same 270 g as the previous ones.

The batteries’ impedance is around 2.22–2.25 mΩ, practically identical to the previous ones.

The batteries arrived charged to about 60–65%, which is unusual for LiFePO4 cells, which are normally charged to around 20%. So they were most likely tested before shipping.

As usual, before getting to the main tests, I’ll show the charging time results, although personally I’m more interested in the CV phase itself.
First, charging at 0.5C, with cutoff when the current drops to 750 mA, or 1/10 of the charging current.
2 hours 3 minutes—not bad at all. The previous ones took a little longer.

Charging current: 1C, with the same 750 mA cutoff, since that’s the standard value for the typical charging current.
1 hour 4 minutes. I’d call that an excellent result.

Capacity measurements at different rates. Unfortunately, I lost the results for the 0.5C test somewhere, but I did save a screenshot showing 14.64 Ah, or 46.31 Wh.
Because of how the alligator clips were connected, I couldn’t use a proper four-wire connection, so there’s a small measurement error in the Wh capacity. I should also mention that, technically, the capacity should be slightly higher, because it’s gotten hot here in Kharkiv, and these batteries are quite sensitive to temperature.
In any case, the batteries fell a little short of the rated 15 Ah. The previous ones had exactly the same issue.

Case temperature at the end of the test. I took the last reading a little late, so the battery had time to cool down a bit. It’s not a big deal, since I took all the readings on the second sample on time. In any case, capacity was much more important to me here—or, more precisely, comparing the results with the previous cells.

The second sample, tested at 0.2C, 0.5C, 1C, 2C, and 40 A. By the way, a reminder: the maximum continuous current for these cells is 2C, or 30 A.
The results are about the same as for the first sample.

The temperature data here is more accurate, but essentially it follows the same pattern as the results for the previous test subjects, taking the higher ambient temperature into account.

But that’s all just background; two graphs are much more interesting.
First, a comparison of the results for both samples, which tells us how consistent their characteristics are and, consequently, how good the manufacturing process is.
And here, things look pretty good. Yes, there are some differences here and there, but in my opinion they’re not significant at all.

This graph was not only the one I was most interested in, but it also genuinely surprised me.
Here’s what surprised me:
1. The graphs are different in their own right.
2. The previous test subjects (shown in red) delivered about the same capacity at 0.2C and 1C, despite the difference in ambient temperature.
3. At 40 A, the new ones delivered noticeably less. I really didn’t expect that.
Here’s what I mean. Usually, as the temperature rises, a battery’s capacity increases slightly, and as the temperature drops, its capacity decreases.
Last time the temperature was lower, so logically the batteries in today’s review should have delivered more. But at medium currents the results are the same, while at high current the capacity dropped.
Still, both last time and this time, the batteries performed identically relative to one another. I used the same load, so there can’t be any measurement error.

Conclusions:
Objective: Yes, the batteries basically deliver what’s claimed. They fall a little short, but it’s all within the acceptable margin of error, so overall everything is fine.
Subjective: These batteries are odd. I don’t know why they delivered less than the previous ones at 40 A, or why they showed the same capacity under normal conditions.
Personally, I think it’s best to use them at currents of 0.5–1C at most. Their strange behavior makes me uneasy, although based on the test results I’d say everything is probably fine. Comparing them with the previous batteries provided more information.
4, gotion vs guohuan 33140 , 15ah, guoxuan 33140 форум, guoxuan lifepo4 33140 форум, сварка 33140 какой лентой?, https://www.kirich.blog/obzory/akkumulyatory/1244-nemnogo-strannye-akkumulyatory-razmera-33140-15ach-lifepo4
Questions and answers
What capacity did the 33140 LiFePO4 cells deliver?
At a 0.5C discharge rate, one cell measured 14.64 Ah, or 46.31 Wh. Both cells produced similar results in the usual test modes, slightly below the stated 15 Ah.
How long do the 15 Ah 33140 cells take to charge?
Charging took 2 hours 3 minutes at 0.5C and 1 hour 4 minutes at 1C. In both tests, charging stopped when the current fell to 750 mA.
Can the 33140 cells be discharged at 40 A?
The article tests them at 40 A, but they delivered noticeably less capacity at that current than the previous cells. The author prefers 0.5–1C; the stated maximum continuous current is 2C, or 30 A.
This model is included in the summary table: Battery comparison: measured capacity and resistance
The figures from this review are in the measurement database: Batteries
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments2
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister




Comments are published in their original language.