Lithium Werks (formerly A123 Systems) ANR26650M1-B 2500mAh batteries: as good as it gets?
I’ve come across information about these batteries and A123 many times, usually in a positive context, with the batteries recommended as top quality. And now I have four of them in my hands.
The price in the title is €4.49, but the store has an interesting offer: buy 49 and the price drops to €3.25 each, while buying 50 at once raises it to €4.29 each.
Unfortunately, though, due to customs restrictions, 49 batteries would cost €159.25 and, at least in Ukraine, would be subject to import duty.
I should also mention one caveat right away. You often see information online about so-called Grade A and Grade B batteries, but as far as I know, there’s no such information on either the official reseller’s website or in the datasheet. So personally, I think this is some kind of rumor spread by battery sellers.

I ordered four of them for one of my projects and for some experiments. Although they’re 26650 size, they look quite different from the batteries I’ve tested before.

Key specifications:
Capacity: 2.4/2.5 Ah
Maximum continuous discharge current: 50 A
Voltage: 3.3 V
LiFePO4 batteries usually have a voltage of 3.2 V. The manufacturer specifies 3.3 V here, but the charging and discharge cutoff voltages are the same as for standard cells.

Some stores list the maximum continuous discharge current as 70 A. That’s not actually an error: there’s another datasheet online that specifies 70 A. But since the website mentioned above also lists 50 A, I consider that figure more reliable. Besides, the 50 A datasheet is dated 2012, while the 70 A one was published in 2011.

The batteries have a nice LithiumWerks and Nanophosphate label, but technically they’re still LiFePO4. Still, it looks pretty cool :) The batteries themselves also look a little unusual.
Unfortunately, I couldn’t figure out the manufacturing date. The battery terminals protrude slightly beyond the casing.

I imagine attentive readers have noticed something odd about the terminals. On conventional batteries, the negative terminal has a larger surface area than the positive one, but here it’s the other way around. Also, the label is usually oriented with positive on the left and negative on the right, but here that’s reversed too.
This doesn’t affect the specifications, of course, but it does affect safety, since it’s very easy to insert the battery backwards.
On the plus side, I noticed something interesting: there seems to be a small plate soldered onto the positive terminal, and you can even see some solder sticking out. I think batteries like these are safer to spot-weld and solder.

The negative terminal also seems to be thicker, but it has a small hole right in the center, which later caused some problems. I use a holder with a four-wire connection, and the sense contact is also right in the center, so it ends up in the hole shown here. I had to shift the battery relative to the holder contacts. And I kept wanting to insert the battery with the polarity reversed...

The dimensions and weight are as specified. The batteries weigh just 76 g, while “classic” Li-Ion cells of this size usually weigh 95 g.

The specified nominal charging current is 1C. At this rate, charging takes 1 hour and 5 minutes. LiFePO4 batteries, especially high-current ones, have a very short CV phase.

A fast-charging mode at 10 A (4C) is also specified; in that case, charging takes 21 minutes.

A preliminary “zero” cycle at a 0.5C discharge rate and the subsequent capacity test gave the same result. The batteries were also initially charged to about 40%.

The datasheet gives discharge curves for constant-power discharge. I tested them at constant current because I wanted to compare them later with other batteries that were also tested in CC mode. The datasheet includes a discharge graph for power levels up to 180 W, which is about 70 A.
There is also a graph showing capacity versus temperature. It shows that at -15, a pronounced "hump" starts to appear, caused by the battery heating itself; capacity is almost the same as at zero.

Battery capacity was measured at currents of 0.2, 0.5, 1, 2, 4, 8, 12 and 16C, or 0.5, 1.25, 2.5, 5, 10, 20, 30 and 40 A, respectively.
These results are very good indeed, and I should point out that there was no "hump" even when discharging at 40 A.

I was expecting a lower temperature, though. It's quite possible that there was some extra heating because the battery was installed slightly off-center in the holder. The graph below shows the temperature at currents of 20, 30 and 40 A.
These cells were also tested on one of the well-known forums, where temperatures of 67, 75, 80 and 85 degrees were recorded at currents of 40 A, 50 A, 60 A and 70 A.

The second sample produced results that were practically identical to the first.


After discharging at 40 A and letting the battery cool completely, I discharged it at 0.5C and was able to get another 27 mAh, or just over one percent. An excellent result.

The batteries also did an excellent job in the test comparing how closely their parameters matched. Below are the results for the first (blue) and second (red) batteries at 0.2C, 10, 20 and 40 A.

Of course, 2.5 Ah isn't a lot, but one of the key advantages of LiFePO4 is its longer service life. For example, these cells are rated for 1400 cycles before capacity drops to 82%, at a 20 A discharge current.

The internal resistance (impedance) is as specified, and my ten test cycles had no effect on it. Below are the measurements taken before testing, after the initial cycle, and at the end.

But I think it's much more interesting to look at the comparison graph with the closest competitors: the JGNE 26650 2300 mAh and VapCell IFR26650 2600 mAh.
There's not much to say about the JGNE 26650 2300 mAh, but the IFR26650 2600 mAh deserves a closer look.
In my VapCell review, I already included a discharge graph and a comparison from the VapCell website, which showed their advantage over the ANR26650M1-B. I can say that I now believe that graph: the IFR26650 really did perform better than the cells reviewed here, although I wouldn't say the difference was large.

And now for the conclusions.
Yes, the batteries meet their specifications, at least up to load currents of 40 A. I can't test them at higher currents yet. Part of the limitation is due to the low maximum current rating of my holder, but reinforced contacts are on the way. Since I'm planning a second part covering their use, I'll most likely test them there at currents up to 60 A.
But I can already say that although the batteries can deliver high currents, in my opinion their maximum continuous current is around 30 A. At higher currents, the voltage drop becomes noticeable (2.85 V), and increasing the load current further will only make things worse. I've seen test results reporting 2.5 V at 70 A, which affects the energy delivered in Wh.
I think this is exactly why the maximum current in the 2012 datasheet was changed to 50 A, down from 70 A in the earlier revision.
In short, I liked these batteries: they have good consistency and overall quality, and I'd say the price is quite reasonable too. But in my opinion, their continuous current should be 30 A, or 40 A at most.
Lithium Werks, 2600, 3.3V, 20С/48С, a 123 system anr 26650 m1a, расшифровка штрих-кода аккумулятора anr 123 sistems, аккумулятор anr26650m1b a123 systems маркировка на корпусе, https://www.kirich.blog/obzory/akkumulyatory/883-akkumulyatory-lithium-werks-byvshiy-a123-systems-anr26650m1-b-2500mah-kruche-ne-byvaet, a123 systems anr26650m1b, аккумуляторы lithium werks купить, lithium werks former a123 systems anr26650m1 b 2500mah 50a lifepo4 3.2v, a123 systems аккумуляторы срок службы, a123 systems 717008, anr26650m1b, как сделать акб 18в 5а с 123 systems anr26650, anr26650m1b low temperature, lithiumwerks, lithium werks anr26650m1 b, как отличить подделку a123 26650, ребрендинг a123 в lithiumwerks, fh_ 1812666 aa02928 расшифровка штрихкода на батарейке anr26650m1 b a 123, расшифровка штрихкода аккумулятора anr26650, anr26650 оригинал и подделка, lithium werks маркировка, anr26650m1 b, аккумулятор а123 systems anr26650, как расшифровывается штрихкод на аккумуляторах а123 anr26650 m1b fn 1812301 ee02200, anr26650
Questions and answers
What capacity did the Lithium Werks ANR26650M1-B cells deliver in testing?
The author measured capacity at currents from 0.5 A to 40 A; the results matched the stated specifications. After a 40 A discharge, the cell delivered another 27 mAh.
What continuous current does the author recommend for the ANR26650M1-B?
Although the cells were tested up to 40 A, the author estimates their continuous current at about 30 A, with 40 A as the maximum. Voltage sag increases at higher currents.
What is unusual about the ANR26650M1-B cells?
The manufacturer specifies a voltage of 3.3 V and a maximum continuous current of 50 A. The author notes the unusual contact layout, which makes it easy to insert a cell with reversed polarity.
The figures from this review are in the measurement database: Batteries
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments1
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister



Comments are published in their original language.