/       /       /    Vapcell batteries, part four: 16340, 14500 and protected 18650 sizes with built-in chargers
Support the project on Patreon


Vapcell batteries, part four: 16340, 14500 and protected 18650 sizes with built-in chargers

$7.99-10
Go to store
This is another installment in my series of reviews of Vapcell products, but this time they’re not just batteries—they have built-in chargers. That’s partly why I gave them a separate review, so they wouldn’t get mixed up with the others.


At first glance, they look much like the batteries in the previous installment, and two are even the same size. The key difference is that these batteries have built-in chargers and overload protection, and one of them also has a converter.



Vapcell P1608A 16340 800mAh
Yes, it’s another 16340. The previous review also covered this size, but with 50mAh more capacity; I noted then that those batteries didn’t pass the test at currents above 2 A.

Model on the manufacturer’s website — link
Model on AliExpress — link, price: $7.99 for 1, $13.00 for 2.
There’s one “catch” with the prices here and below: the AliExpress store has two listings for each item, and the prices differ.



They arrived in a small box with the brand logo. The box holds four cells, but since I always order a pair for testing, it was only half full.


All the batteries shown here have one thing in common: their specifications are split into two sections and presented as photos rather than text.

The first states a nominal capacity of 800mAh and a minimum capacity of 780mAh at 0.2C.


The second lists the charger and protection board specifications.

I give the manufacturer credit for providing fairly detailed information for each model. In fact, all the necessary specs are there for both discharge and charging, as well as protection. For example, it states a protection trip current of 4–5 A and cutoff voltages of 2.5/4.25 V.


I’ve reviewed 18650 batteries with built-in chargers before, but this is the first time I’ve seen ones this small. There’s a microUSB port on the side. The positive terminal is much neater than on the previous models, and it also has some kind of gold-colored coating.


The dimensions and weight are close to the stated values. The length is just 2.13 mm greater than that of an unprotected 16340, which is pretty good.


Since this is essentially a regular protected battery with a built-in charger, it can be charged in two ways: in any standard charger or using its built-in charger via USB.
An indicator LED is located at the end of the case, under the insulation. It shows the charging process and when charging is complete, and lights up only when using the built-in charger.


First, I connected it to my “break-in” charger, which measured a capacity of 860–870mAh at a discharge current of 0.25 A.


When I charged the first sample using its built-in charger, it delivered 861mAh. The charging current was about 330mA, which is in line with the stated 375 ±50.


Heating was moderate; the maximum temperature near the positive terminal was 52–53 degrees.


Since there was no point in using the relatively slow built-in charger for the rest of the tests, I charged them with the battery tester.
According to the specifications for the cells used, two charging modes are supported: standard at 500mA and fast at 1 A.
In standard mode, charging took 1 hour and 46 minutes, which is a very good result. I didn't test it in fast mode, since in my opinion that's already a lot for cells like these.


The description says it has protection, which partly defines its intended use: compact flashlights—or, more accurately, compact high-power flashlights, since the rated load current is up to 4–5 A, or about 12–18 W.


First, let's check the protection trip current.
With the load current increased in steps and the battery fully charged, the protection tripped at around 5 A.


The low-voltage cutoff is just as important. In this case, it works as specified, tripping at 2.5 V per cell, which prevents the battery from operating under critical conditions.


The manufacturer has published its own test results, but I think you still remember the issues with the previous 16340 850 mAh battery.


I tested the first sample at load currents of 0.2, 0.5, 1, 2, and 3C, as well as 3 and 4 A.
The results are simply excellent. Even at 2C, the battery delivered its rated 800 mAh, and it still delivered 780 mAh at 3 A. The result dropped off somewhat only at 4 A. There is a small caveat, though: right at the very end of the discharge, the battery's protection tripped—but so close to the end that you can't even see it on the graph.


The temperature at 3C (2.4 A), 3 A, and 4 A was also quite reasonable.


Since the first sample fell a little short of completing the discharge at 4 A, I limited the final test on the second sample to 3.8 A.
The results were just as excellent, and it delivered 751 mAh even at 3.8 A.


The temperature was practically the same in the same test conditions. At the maximum load, it was a couple of degrees lower than on the previous sample because the current was lower.


Measuring the battery's impedance here isn't entirely accurate, since the protection transistors are in the circuit and I'm measuring their resistance as well. Still, the description specifies up to 100 mΩ, which is quite consistent with the actual measurements.





Vapcell P1418 14500 1800mah 1.5v
These batteries are quite unusual and have a relatively narrow range of applications, but they can still be very useful.

Model on the manufacturer's website — link
Model on AliExpress — link, price — $7.99 for 1, $13.00 for 2.



They come in a four-slot box. The security code is printed on the box itself, not on the battery casing.


In brief, the specs are: equivalent capacity of 1800 mAh, voltage of 1.5 V, load current up to 1.5 A, and charging current of 350 mA.
Inside is a 920 mAh Li-Ion cell.


The additional specs also list a discharge cutoff voltage of 2.5 V, just like the previous batteries.


Attractive black-and-yellow batteries, with the voltage and capacity marked on them. The positive terminal is yellow and protrudes beyond the casing.


And here's the key feature: these batteries are designed to replace standard AA batteries and rechargeable cells, since they provide the standard 1.5 V output. I think it's a good idea, especially since Li-Ion batteries have a longer service life and no memory effect. But there's one downside (which is also an upside): the output voltage stays constant until the battery is fully discharged, so you can forget about battery-level indicators.


Despite all this, the manufacturer managed to stay within standard dimensions—14 mm in diameter and 50 mm long—and fit not just the cell into that space, but also a charger, protection circuit, voltage converter, and microUSB socket!


Vapcell also offers a version in the same size without a step-down converter, i.e. just a regular 3.7 V cell with a charger and protection circuit.


Apparently, it uses the same charging chip as the previous battery, at least the charging current is the same: 330-340 mA. A charging cycle takes 930 mAh, which is quite consistent with a 920 mAh cell.


Although I charged it the "usual way" during testing, using the built-in charger, I was curious to see what would happen if I put this battery in a regular charger. As I expected, nothing bad happened: it started charging. But since the current flowed through the converter in reverse, effectively through the MOSFET's body diode, the process was extremely inefficient. After "putting in" 300-350 mAh, the current dropped from the initial 500 mA to 300 mA.
In any case, you can top it up a little, to around 50-60%, even with a regular charger for Li-ion batteries.


Load capability.
The battery can briefly deliver up to 2.1 A. The voltage dropped from 1.5 V to 1.45 V, but stayed at exactly 1.5 V up to a load current of 1.3 A.


The Vapcell page has test results.


The first sample was tested at 0.2, 0.5, and 0.75C, as well as 1.6 and 1.8 A.
At the standard discharge rate of 0.2C, capacity exceeded the claimed 1800 mAh, reaching 1890 mAh or 2816 mWh. The battery performed very well at discharge rates of 0.2-0.75C, but at 1.6 A it delivered only 785 mAh before shutting down on protection. At 1.8 A, it shut off almost immediately after the test began, delivering just 56 mAh.
By the way, the protection does not reset automatically; you need to connect it to a charger, even briefly.

A few calculations.
Typical 14500 lithium cells can have a capacity of around 900 mAh. I once tested similar Trustfire cells, and they delivered 3182 mWh at an actual capacity of 867 mAh. This one clearly has a higher capacity, so its calculated energy should be around 3300 mWh. From that, we can estimate the converter's efficiency at a current of 360 mA at 85%. It's harder to calculate this for other load currents, since the exact energy capacity of the internal battery in Wh is unknown.


I tested the second sample at 0.2, 0.5, and 0.75C, as well as 1.5 A. It passed all the tests, delivering 1553 mAh or 2297 mWh in the highest-current test, with a stable voltage of 1.48 V.


During discharge at 1.35 and 1.5 A, the highest temperature was near the positive terminal, where the converter is located. The battery itself was only slightly warmer than room temperature.
Overall, the expected service life of a battery like this is quite good, since it operates at load currents below 1C, which leaves plenty of headroom even for the highest-capacity cells.


After all this, a fairly predictable question comes up: what AA-format power options are there with a voltage of around 1.5 V?
Besides regular zinc-carbon and alkaline cells, there are at least these options:
1. Nickel-cadmium and nickel-metal hydride batteries. Convenient and familiar, and they can be charged with widely available chargers. They're inexpensive, but there's one drawback: their voltage is 1.2-1.35 V, which not all devices can handle.
2. Nickel-zinc cells. The voltage is fine, and so is the price, but they require a less common charger, and their service life leaves something to be desired.
3. Batteries like the one reviewed here, for example, from Palo. They cost about half as much, but judging by user test results, their actual capacity is also around 1300 mAh or 1800 mWh. Plus, to charge them, you'll need to make or buy a holder that supplies 5 V to the terminals.
4. Lithium batteries with a voltage of 1.5 V. Interesting, but very expensive. They have a decent capacity, but are less widely available.
5. If the device is powered by 2 × 1.5 V batteries, you can use the LiFePO4-and-dummy-cell option. I use these myself, but there is a downside: the capacity isn’t very high.






Vapcell P1835A 18650 3500mAh 10A
At first glance, these look like ordinary high-capacity protected 18650 cells, but it turns out they’re not quite ordinary.

The model on the manufacturer’s website — link
The model on AliExpress — link, priced at $10 for 1 cell or $16.99 for 2.



The packaging is a bit more substantial here. If I understand correctly, the case is included, but that pushes up the price.


The rated capacity is 3500 mAh, with a minimum of 3350 mAh (at 0.2C). More interestingly, the maximum continuous discharge current is 10 A.


Charging current is up to 750 mA, charging cuts off when it drops to 75 mA, the low-voltage cutoff is 2.5 V, and the protection trips at 12–15 A.


Ignoring the size, they look exactly like the previous 14500 cells. The positive terminal is yellow too, and there’s a microUSB port for connecting a charger or power supply.


They’re noticeably larger than standard 18650 cells; 18700 would be a more accurate name, since they’re 70 mm long. Keep that in mind. Their diameter is also 0.5 mm greater than that of ordinary cells.


Like the 16340 cells shown earlier, this battery supports two charging modes: using a regular charger or its built-in charger. In my test device, it delivered 3650 mAh at a discharge current of 0.5 A.


Charging with the built-in controller isn’t quite as good as promised. The current initially does rise to 730–750 mA, but then quickly drops to 570–600 mA. It stays there for about 5–10 minutes, then stabilizes at around 630–650 mA. The charge takes 3.45 Ah.


The front of the battery gets very hot when charging over USB, reaching 75–77 °C, so I’d recommend using a regular charger instead.


Discharge characteristics.
Unfortunately, I hit the limits of my electronic load’s auto-test function here. It took the current up to 10 A and reached its limit; sadly, my higher-current loads don’t have an auto-test mode.


At 0.2C, the low-voltage cutoff is 2.5 V, as specified.


The voltage is measured directly at the battery, so at 10 A the battery cut off at 2.2 V measured at the external terminals, which is also normal.


Two charging modes are supported: normal, at 1.5 A, and fast, at 3 A.
In the first mode, charging took almost three hours; the battery has a fairly long CV phase.


With fast charging at 3 A, the battery charged in 1 hour 55 minutes, and the CV phase lasted even longer. I’d recommend charging this battery at 1.5–2 A.


As with the previous batteries, the manufacturer’s website had a test graph. At first glance, I thought the curves used the same color coding as mine—black, orange, yellow, green, blue, cyan, purple—but no, yellow is missing :)


In my tests, I used discharge rates of 0.2C, 0.5C, 1C, 2C, and 10 A. At 0.2C, the battery delivered 3460 mAh, or 12.5 Wh, which is well within the manufacturer’s stated range—near the upper end, in fact.
Even at 10 A, the battery delivered 3224 mAh, or 10.2 Wh, which is quite good, especially for a protected battery.

I’ve actually reviewed a similar battery before, and the results were much more modest. The test results at maximum current are similar to those from the test of the LG INR18650-MJ1 battery.


Temperatures at 3.5, 7 and 10 A. At the maximum setting, the battery reached 83 degrees, and since it is a high-capacity battery, I wouldn't recommend fully discharging it at that current.


The second sample produced comparable results, with capacity about 5–10 mAh higher.


The temperature here climbed to almost 86 degrees.


The batteries' impedance, including the protection circuit, was 32 mΩ. The LG INR18650-MJ1 measured 20 mΩ, so if the protection circuit's transistors have a resistance of 10–15 mΩ, that seems quite plausible.


Now, based on everything shown above, we can draw a few conclusions.
Vapcell P1608A 16340 800mah - Its capacity and discharge performance match the specifications. Despite its compact size, the battery can deliver up to 3.8 A continuously and 4–5 A for short periods. It's odd that the previous 16340 850 mAh battery had already given up at currents above 2 A.
Vapcell P1418 14500 1800mah 1.5v - Capacity was about 100 mAh higher than specified. As advertised, it can supply 1.5 A continuously and up to 2 A for short periods, which is worth bearing in mind when choosing one. The battery holds its 1.5 V steadily, which, as I mentioned, is both an advantage and a drawback. Its size matches an AA cell: 14500.
Vapcell P1835A 18650 3500mah 10A - Here, too, almost all the specs match, except for the charging current: it actually measures 630–650 mA, rather than the specified 750 mA. That may even be for the best, since it would get hotter at 750 mA. At this current, though, charging takes more than 5 hours. One of its main advantages, in my opinion, is the protection circuit, which is rated for high current—a rarity in protected batteries. Their maximum current is usually 4–6 A; this one handled a full discharge at 10 A.

In short, all the samples delivered their rated specs and performed very well overall. The only real complaint is the price. There are still alternatives to consider for 18650 batteries, but similar 16340 and 14500 models are much harder to find.

That's all for now. I hope you found this information useful.
$7.99-10
Go to store
This page was found when searching for:
аккумуляторы 18650 и14500, 16340 в чем разница, аккумулятор 14500, https://www.kirich.blog/obzory/akkumulyatory/917-akkumulyatory-vapcell-chast-chetvertaya-tiporazmery-16340-14500-i-18650-s-zaschitoy-i-zaryadnym, аккумулятор 16340 и 18650 1400 ah 3.7v в чём разница между ними, аккумулятор огонь 14500 18650 в чем разница между ними, отличие 16340 от 18650, 16340 с защитой или без как определить, обзор и тест китайских аккумуляторов 14500 с aliexpress, аккумулятор 14500 и 18650 разница, какая максимальная емкость аккумулятора 14500, чем отличаются аккумуляторные батарейки 18650 от 14500, акб vapsell, повер 3в 16340 4000ампер, аккумуляторы 16340 максимальное мач, 14500 аккумулятор и 18650 в чём разница между, аккумуляторы vapcell, vapcell 18650 button top выпуклый плюс a pointer, каким током заряжать 14500, ток 14500 usb аккумулятор для электронных устройств..., вапселл., размер батареек 14500 с защитой, аккумулятор vapcell отзывы, аккумулятор 16340 ток разряда 3а, можно ли заряжать аккумулятор 14500 током 0,5 а, что эффективнее 2акб 14500 или 6 аа на 1.5 вольта

Questions and answers

What current can the Vapcell P1608A 16340 handle?

It delivered 751 mAh at a 3.8 A discharge current. Its protection tripped at about 5 A.

Can the Vapcell P1418 14500 replace an AA battery?

Yes. This 14500 battery is designed to replace AA cells and maintains a steady 1.5 V until discharged. The author tested 1.5 A continuous and up to 2 A briefly.

How did the Vapcell P1835A 18650 perform at 10 A?

It completed a full discharge at 10 A. Its actual charging current was 630–650 mA rather than the stated 750 mA, and charging took more than 5 hours.


This model is included in the summary table: Battery comparison: measured capacity and resistance

The figures from this review are in the measurement database: Batteries

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister