/       /       /    VapCell INR26350 A20 2000mAh batteries, part five: 26350 size
Support the project on Patreon


VapCell INR26350 A20 2000mAh batteries, part five: 26350 size

$13.98 (за пару)
Go to store
I never cease to be amazed by the variety of battery sizes, and that's partly why today I'm reviewing some examples of the rather uncommon 26350 size.


For a series of new reviews, I ordered several types of batteries from Vapcell. In this case, though, I tried to choose ones for which it would be difficult or impossible to find an alternative—not just from well-known manufacturers, but anywhere on the Chinese market. This applies both to the size and to other features.


We all know the most common sizes: 18650, 26650, 21700, 18350, 14500, and so on. But there are actually many more.

I tried to find a list of all standard sizes online, but unfortunately could only find a few charts. Here's one for lithium batteries, for example.


This one is an appendix to the Wikipedia article on batteries, but even these charts don't cover the full range of sizes that are manufactured and, as it turns out, actually used. In fact, if a particular case size is used, that means someone makes it.


Today we're looking at 26350 batteries—not 26650 or 18350, but this little "chunky" cell, which, as it turns out, is sometimes used in flashlights and the MOZA Aircross gimbal. I'll leave it to users to decide whether flashlights like these are practical, but I couldn't pass up such an unusual size.

They're sold in lots of 1 to 6, with both paid and free shipping options. The total price ends up being the same, although the paid-shipping options may be a better deal for countries with low customs thresholds.
Link to the lot with free shipping: 1 costs $10.98, while 2 cost $13.98.


Specifications from the Vapcell page — link.
Model: A20 INR26350 2000mah 6A
Size: 26.1х35.0mm
Nominal voltage: 3.60V
End-of-charge voltage: 4.20V
End-of-discharge Voltage: 2.5V
Typical Capacity: 2000mAh (0.2C discharge)
Min capacity: 1960mAh (0.2C discharge)
Weight: Max:48g
Internal resistance: Max:35mΩ (AC 1kHz)
Standard Charge: 1000mA,CCCV 100mA cut-off
Quick Charge Current: 2000mA
Max Continuous Discharge Current: 6A

A protected version is also listed, but I haven't seen it for sale; apparently it's available by special order.


The batteries have a large, flat positive terminal that extends noticeably beyond the case and looks quite substantial, even though these cells aren't designed for high discharge currents. The negative terminal also protrudes slightly, which can be useful in some cases.
The store also offers a button-top version, with a raised positive terminal. It costs about 60 cents more, but interestingly, the price difference is the same whether you buy a lot of 1 or 2.


The dimensions match the specifications exactly, and the weight is slightly below the stated maximum of 48 g.


For a visual comparison, here's a photo next to 26650 and 18650 cells.
Since it's 35 mm long, you could in principle build a 2S pack that's almost the same size as a typical 26650—or 26700. The usefulness of this approach is questionable, since in practice we get a higher voltage, but the capacity is equivalent to 4 Ah, whereas 26650 cells are often rated at 5 Ah or even 5.9 Ah. Still, it can be a good option for convenience and, in some cases, to simplify the device circuitry.


The “break-in” cycle and initial capacity measurement: the charger showed a capacity slightly above the rated value. What’s more, the two cells were practically identical, at 2123 and 2115 mAh, or 7.64 and 7.61 Wh, respectively.


Two charging options are specified for these batteries: “normal” and “fast.” In normal mode, the current is 1 A, or 0.5C, and a full charge takes 2 hours 20 minutes.


In fast mode, charging is done at 2 A, or 1C. This cuts the charging time by exactly an hour, to 1 hour 20 minutes.

A quick note: to achieve this charging time, you need to do more than just set the charging current—you also need a charger with a four-wire connection. Since ordinary chargers don’t have one, charging may take longer with them.


The manufacturer’s page included a discharge graph which, judging by the tester model, was clearly measured in-house using an EBC-A40L battery tester.
Capacity was measured at currents of 2, 5, 7, and 10 A.


I used an EBC-A10H tester, which was the best fit for the job. The tests were run at more familiar rates of 0.2, 0.5, 1, 2, 3, and 4C, where C = 2 A.

Everything was excellent up to and including 6 A: the batteries really do deliver the rated 2 Ah, and even a little more. But the test at 8 A (4C) was a bit of a surprise. The graph on the product page looked much better, even at 10 A.


Temperature performance was excellent: 54 degrees at 6 A, and somewhat higher at 8 A—64 degrees.


The second cell behaved similarly at currents up to 6 A, but at 8 A it delivered noticeably better results. Still, in my opinion, it was clearly being pushed too hard: the 8 A (4C) graph had dropped quite a bit.


Temperature performance was similar to that of the first cell.


The capacity drop of the first cell at 8 A surprised me so much that I started suspecting a measurement error or some tricky fault in the tester. The easiest way to check was to use another tester, so I repeated the test with an EBC-A20 and got the same result (blue graph), with a small allowance for the tester’s own measurement error. For comparison, I’ve also included the results for the second battery (red graph) under the same conditions.


The specifications state: “Internal resistance: Max:35mΩ (AC 1kHz).” My measurements fully confirmed this. Below are the results when new, after the “break-in,” and after all the tests.


I found two alternatives on AliExpress with a slightly different appearance, but the same positive and negative contact design and a comparable price. Unfortunately, there are no test results, though there are reviews.



Conclusions.
Judging by the specifications, there are no issues: everything meets the claims, and even exceeds them.
What does bother me a little is that at 8 A, the performance of the two cells differs noticeably. Usually, that points either to a significant difference in production dates or to a poorly controlled manufacturing process.

In any case, there aren’t many alternatives to these cells, and there’s no guarantee they’ll be any better. So, based on the test results, I’d say they’re worth buying.
The 11.11 sale promises a price of $12.94 for a lot of 2, with free shipping.
$13.98 (за пару)
Go to store
This page was found when searching for:
1, аккумулятор 26350, li ion аккумулятора 26350 северодвинск, аккумуляторы vapcell 26350, 26350 аккумулятор, 26350, зарядное устройство power plant pp m5 видео, 26350 аккумулятор габариты, 26350 аккумулятор купить, аккумуляторы 26350, размеры батарея 18350

Questions and answers

What capacity did the VapCell A20 INR26350 cells deliver?

The initial test measured 2123 and 2115 mAh, or 7.64 and 7.61 Wh.

How do VapCell A20 INR26350 cells perform at 8 A?

Their performance drops noticeably at 8 A, and the two tested cells differ. One sample reached 64 °C.

What discharge current does the author consider suitable for VapCell A20 INR26350?

Up to and including 6 A, both cells delivered the rated 2 Ah and slightly more. At 8 A, the author notes that they are overloaded.


This model is included in the summary table: Battery comparison: measured capacity and resistance

The figures from this review are in the measurement database: Batteries

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister