/       /       /    ESCAM G02, a pan-and-tilt IP camera with 1280x720 resolution
Support the project on Patreon


ESCAM G02, a pan-and-tilt IP camera with 1280x720 resolution

$45.37 ($24.99 с купоном)
Go to store
I was offered the chance to review a product from the store mentioned above. I chose an IP camera, since the other products interested me considerably less. And now I’ve finally got around to taking a look at this camera. Let’s see what it’s like inside and out, and how it works.


I think I should start by saying that I’m quite skeptical about pan-and-tilt cameras. A proper pan-and-tilt camera is usually more than just a camera "with a motor"—it’s a robotic system. In other words, a system that can independently "see" objects in the frame and do more than simple patrolling: it can automatically track them as well.
If a camera can’t track objects, then after playing around with it for a while, operators usually point it where they want it and leave it there for years. Of course, there are exceptions, and I’m not arguing otherwise. It’s just that, in my personal opinion, several fixed cameras can replace pan-and-tilt systems quite well.

But I’m getting a little carried away here, since it would be unreasonable to expect that kind of functionality from a camera at this price. It’s also marketed for home use, though I’ll share my opinion on that at the end of the review. For now, let’s take a closer look.

The camera arrived in a fairly large box. Everything inside was securely held in place and neatly packed, so no complaints there—it would be quite difficult to damage it in transit.


A screenshot of the technical specifications from the store page.


The package includes:
1. Escam G02 camera
2. Power supply
3. USB-to-microUSB cable
4. Mounting bracket
5. Fasteners
6. Manual, warranty card, etc.



I initially just took a photo of the manual, but later found it online, which I think is even better. A reminder: you can enlarge all the images in my review by clicking on them.


1. USB-to-microUSB cable, nothing noteworthy.
2. 5 V, 1600 mA power supply. I didn’t test it under full load, but I can say it provides more than enough power for the camera.
3, 4. The bracket is quite convenient and lets you mount the camera on either a wall or a ceiling. It’s made of plastic, which is probably its only drawback.


I have no complaints about the camera’s appearance. It’s clearly designed for indoor use: full-size cameras usually look more rugged, while this one even shows some effort to make it look good.


There’s a microphone hole above the manufacturer’s name. But I’ll say right away that the microphone is mostly "for show", since its sensitivity and sound quality leave a lot to be desired. Maybe I just got unlucky, but I can’t say for sure.


On the front are the lens, IR LEDs for night vision, a green power indicator LED (which can be turned off), and a light sensor that switches on the IR illumination and tells the camera when it gets dark.
There’s a small plastic ring around the lens. The idea is that you can use it to adjust the lens focus. But it doesn’t grip the lens very well, and after a fairly short time it started spinning freely. In the end, I had to adjust the focus with needle-nose pliers. I later made a small modification so the ring would hold better, but the design clearly needs some work: adjusting it takes quite a bit of force.

Also, while you’re adjusting it, your fingers will periodically block the image and sometimes the light sensor too, causing the camera to switch to black-and-white mode. I recommend turning off the day/night automation before adjusting the focus; it’ll make things noticeably easier.


The camera can tilt up and down, and pan left and right.
1, 2. It can tilt down quite a bit, but keep in mind that at night this can cause problems because of the IR illumination.
3, 4. It can pan almost a full turn; the stated range is 355 degrees, which more than covers the entire "horizon". But there’s another drawback here: the WiFi antennas. If you want to "turn its head" through the full 360 355 degrees, you’ll need to position the antennas so they aren’t in the way.


There are two WiFi antennas. They can’t be detached.


On the back are:
1. Reset button
2. Ethernet port
3. microSD card slot.
4. microUSB socket for power.
The power socket itself, as well as the 5 V supply voltage, immediately puts this camera in the category of consumer devices, since video surveillance equipment typically uses 12 V DC, 24 V AC, or 48 V PoE.
With a 5 V supply, you simply won't be able to install the camera far from the power supply.


There are four rubber feet on the bottom, as well as a threaded hole for the bracket screw. The thread is the same type used on cameras and similar devices for mounting on brackets and tripods.


Since I mentioned the power supply above, here are the results of my current consumption test. The ammeter is a little off, but that doesn't matter here.
1. Normal operating mode.
2. IR illumination switched on as well.
3. Startup and software loading mode
4. Continuous horizontal rotation mode.
As far as I could tell from my experiments, the camera can't use both motors at the same time, so the maximum current is up to 1 A (rotation current + IR illumination is about 0.2 A).


I took the camera apart at the final stage, but decided to show it before the tests.
By the way, I almost forgot: the camera inadvertently passed a durability test when it fell from a height of one meter onto a tiled floor. Not only did it survive without any problems, it didn't even get scratched. I took it apart after the fall.

Remove the rubber feet and unscrew the four self-tapping screws.


Inside is a small all-in-one board and a bunch of wires.


Since it's awkward to work on it in this configuration, we separate the bottom of the case with the board from the top section with the mechanics and optics.


On top is the SoC GK7102, which includes:

CPU core: ARM1176 @ 600MHZ, 16KB I-Cache, 16KB D-Cache
40nm process, BGA228 package (11 * 11)
High integration: Integrated 512Mb DDR2, Ethernet PHY, Audio Codec, MCU, eFuse
Excellent performance ISP
- Image processing: 3A, WDR, 3D noise reduction, ? conversion, RGB filter, dead pixel correction, black level correction, lens positive survey
- Intelligence: motion detection, face detection, to prevent peripheral, remnants recognition
Encoding performance
- Video: Support H.264 BP / MP / HP, MJPEG / JPEG
- Audio: Support G.711 / G.726 / ADPCM / MP3
Maximum support 4 encoding processing capacity
- 960P @ 30fps + VGA @ 30fps + QCIF @ 30fps + 960P JPEG @ 1fps
- 720P @ 30fps + VGA @ 30fps + QCIF @ 30fps + 720P JPEG @ 1fps
Audio Interface
- Through the I2S interface, Audio Codec built external to a second election
- When external supports two-channel stereo
Video Interface
- Support 8/10/12 bit RGB Bayer input
- Supports one CVBS output
Peripheral Interface
- USB 2.0 host / device x1
- ETH MAC + PHY X1
- UART X3, SPI X2
- I2C X2, PWM X4
- I2S X2, SDIO2.0 x1, IrDA x1
Low Power: 800mw (including DDR), true standby function: System standby current 60uA
Fast wake-up: support infrared and wake button
AES, DES, 3DES security engine


There's also a WiFi module based on MT7601UN


I photographed the power regulator section separately, since it can in principle be repaired and is also more prone to failure.


On the underside are the flash memory chip for storing the firmware (presumably), an audio amplifier for the speaker, a motor driver, and an unmarked chip.


The camera is rotated by two small motors. Only one is visible from below; we'll get to the second one later.
To take the camera apart further, you need to unscrew four self-tapping screws. You can see them in the holes marked with arrows.
Not all the screws will be visible at once; to see them, you need to turn the mechanism by hand.


At first, I thought there was a large gear inside, driven by the motor.


But it turned out to be much simpler: the motor is a geared motor, i.e. "two in one". The solution is simple and fairly reliable.


To take the camera apart further, you need to remove the two self-tapping screws at the back of the camera housing and release a pair of clips marked with arrows in one of the previous photos.
Here are the second motor and the camera board with the IR illumination board.


We remove the camera module. You can see marks from needle-nose pliers on the lens; I adjusted it without the plastic ring fitted.


The camera board contains only the image sensor and the driver that controls the IR filter; everything else is on the main board. Essentially, the camera has been split into two parts and connected with a flexible ribbon cable. I can't say I like this design: the more wires run through the rotating part of the housing, the worse it is for reliability. But since this is a “home” camera, I don't think it's a critical issue.
The image sensor itself is quite small, which usually means lower light sensitivity.


Let's move on to the software, where things get really interesting.
First, I tried connecting to the camera through a browser. I started with Opera 12, but there was no image.
Then I launched Chrome, and got an image after installing a plugin. It isn't installed yet in the screenshot.
I found the camera's IP address in my router's menu.

On the left of the screenshot, you can see the camera controls and access to the flash card. The problem is that the flash card menu appears for a couple of seconds, then disappears.


Eventually, this is the screen you end up with.
The only good thing is that the camera responds quickly to position adjustments. But after a few days, something happened: the response was still fast, but the image lagged by 10–20 seconds.


There are no problems with the settings; full access is available, and I'll show them all separately later. The only thing I didn't like was the time synchronization, which the camera handles rather sluggishly. As a result, you can end up with the year 1970 for about 10 minutes.


In Internet Explorer, there was no problem accessing the memory card, and the menu didn't disappear.


I could even view and download the recording files I needed, but there was one problem: IE had no image....


Since I wasn't at all happy with the situation, I started looking for software that would let me not only view the video but also record it to my computer.
First up was Tecsar CMS, which wouldn't detect the camera even when I entered all the settings manually, let alone find it automatically.


Next was another CMS program, which I'd already used in some previous reviews. This time, the software found the camera on its own and let me control its rotation. I even managed to access PTZ from the main window once, and everything worked very quickly—I mean the response time to commands.
I set the software to record video. It recorded for about 12–15 hours, then the image froze. I restarted the software and couldn't connect to the camera. I tried everything, but it just wouldn't detect the camera, no matter what I did. Then, some time later, it started working again without any problems. Mysterious.


One of the first programs I tried with Chinese cameras worked without a hitch, finding the camera on its own almost instantly.
The program doesn't offer many features, but it's very stable. However, it doesn't provide access to PTZ controls (rotation) or the camera settings. The latter isn't critical at all, but I was disappointed that I couldn't rotate the camera. In the end, I controlled the camera from Chrome and recorded using the software mentioned above.


After all those experiments, I finally wondered what the manufacturer had to offer. I was a little surprised to find software for these cameras on its website.
The software found the camera instantly, and the rotation controls worked perfectly. It also supports “diagonal” movement, but as I mentioned above, the motors only operate one at a time.


So, it seemed like a dream come true: a great program with everything you need, easy to use. But it all turned out “as usual.”
First, I'll go over the software's features and the camera settings.
The software lets you view both the local archive on your computer and the archive on the memory card, but you can't speed up the video—only rewind it manually.
The settings menu is quite extensive, with options for video compression settings for the main and secondary streams.


1. There’s an extended dynamic range setting, but it doesn’t work on this camera model, which is a shame. On the other hand, you can control the day/night mode.
2. Audio settings. As I said, I wasn’t impressed with the sound.
3. Motion detector mode. It only works across the entire frame; you can’t select individual zones. Sensitivity adjustment is crude, with just three settings.
This is also where you choose what happens when the detector is triggered.
4. Ethernet connection settings, just like on other cameras.


1. Recording to a memory card: schedule, which stream to record, and so on.
2. Option to automatically take photos on a schedule.
3. Pan-and-tilt mechanism controls, with three speed settings. In practice, the medium or slow setting is usable; at maximum speed, it’s not very convenient. At full speed, a horizontal pan takes about 5 seconds and a vertical tilt about two.
By the way, when powered on, the camera tests the motors and sets limits for the end positions. After that, it returns to the position it was in the last time it was used. You can also set it to return to the center position after a reboot.
There’s also an option here to turn off the green status LED.
4. Time synchronization settings. It works reliably, but sometimes with a long delay.


1. Searching for access points and connecting to WiFi. The camera only supports the 2.4 GHz band. Its sensitivity is quite good, but the usable range isn’t very large, even though the camera has two external antennas. I once showed a recorder with four WiFi cameras, and the difference in performance was quite significant. Where the recorder worked perfectly well, this camera wouldn’t work properly at all, transmitting just 1–2 frames per second.
2. Settings for recording to the computer’s hard drive; these apply to all connected cameras.
3. Program settings: reconnect delay if a camera is lost, screenshot and log recording modes, password changes, and so on.
4. An example of the camera log, which records all the more or less important events.


Now for the bad news. As I said, the program is quite stable and easy to use. All in all, I’d be happy with it if it weren’t for one catch: the software only records video at 640x352, i.e. only the secondary video stream. I tried switching modes, but no luck. Even when saving video from the memory card, the software only saves the secondary stream. So either I missed some hidden setting, or the software only records the secondary stream.
All I can say is that so far I haven’t found computer software that can do everything and do it correctly.

Next, a few words about the fact that the camera can work with a smartphone as well as a computer.
Like any sensible person, I first tried following the link in the QR code that came with the camera. It was either on the camera itself or in the manual—I don’t remember. But it ended up taking me to some Chinese website full of ads. Nonsense...
My search led me to software that works properly with this camera. Below is a QR code linking to it.


Well, I have to say, I liked this software right from the start. First, it asks you to enter the number printed on the sticker on the side of the camera.
After that, the software finds the camera and connects to it.


Tap the camera icon to view the image. By default, the video is streamed using the secondary stream, which makes sense given that it’s presumably being viewed on a mobile device.


1. The main window gives you access to the main stream at 1280x720 resolution.
2. Since the camera can be installed upside down, there’s an option to flip the image.
3. The software is universal and includes controls for cameras with zoom lenses, but that feature doesn’t work here.
4. The camera’s movement controls are very simple: swipe your finger across the screen in the direction you want the camera to turn. It doesn’t always respond, though, so you have to swipe again.
You can set up and control position presets, which is handy, but there’s a flaw here too. To set one up:
1. Manually move the camera to the desired position
2. Enter a preset number
3. Press Set.

To move the camera to a preset position:
1. Enter the preset number
2. Press Call.

It all seems convenient and logical. But there’s a catch. I saved a preset as number 5. Then I moved the camera to a different position and wanted to return it to position 5. I selected 5 on the keypad and accidentally pressed Set instead of Call. As a result, the previous position was erased and the new one saved. The software doesn’t ask you to confirm, so it’s easy to accidentally overwrite a preset. Basically, nothing serious, but it's inconvenient.


The software supports the same settings as the computer software, as well as access through a browser.



1. When connected to the camera, the sound from its microphone will play through the phone's speaker.
2. You can also configure the WiFi connection here.
3. I used a 2 GB memory card for the tests, but also checked with 8 and 32 GB cards, and they work. I haven't tried larger cards.


The same settings for time synchronization, email sending, and the FTP server.


I actually liked the archive viewer. I tried it with access to the camera's memory card, since I don't see the point of saving anything to the phone itself. It displays a list of files; tap one to view the corresponding video. You can also view photos taken manually or by the camera itself.


A couple more screenshots showing how the camera video looks on a smartphone. Double-tap to hide or show the top and bottom menus.


The footage was shot just before dusk, but the image is quite decent.


I've finally made my way to the image quality tests.
First up: sharpness.
The camera has a lens with a 3.6 mm focal length, but to me it seems closer to 4 mm in practice. The field of view isn't very wide.
By the way, if I were choosing a lens for a pan-and-tilt camera, I'd go with a 4 mm focal length. The image would be better, although you'd have to turn the camera more often.

For this test, I positioned the camera so that the test image covered the same area as in the tests of the other cameras.
What can I say? I expected a bit more, perhaps because I've gotten so used to higher-resolution cameras lately.


The image at the corners is really poor. There are also problems with color accuracy; I think the cheap sensor is to blame.


Compared with higher-quality cameras, this one obviously loses. Compared with another camera at the same resolution, though, the results are basically the same.
For comparison:
1. The camera under review.
2. AHD 1 MP from the 4-camera kit + DVR.
3. Szsinocam SZ-IPC-7032CSW/ 2Mp
4. Hikvision DS-2CD2032. 3.2 Mp.
5. 1080p IP camera from OWSOO
6. S1304-N Kkmoon



In normal everyday conditions, it works quite acceptably. The screenshot shows footage under artificial incandescent lighting. The color reproduction leaves a lot to be desired, though—the camera clearly has a green cast. That's a fact.


The illumination is also quite adequate in these conditions. There's no pronounced bright spot, though a diffuser still wouldn't hurt.


A few more photos, but first, a demonstration of how the illumination can interfere with the camera's operation if it doesn't have BLC.
1. Evening; night mode hasn't turned on yet.
2. It gets dark, and night mode turns on.
3. It gets even darker; the image turns to "milk".
4. We turn the camera to the side so the window frame is out of the shot, and tilt it up a little to avoid glare from the bottom of the camera itself.
It's clear that while the result isn't great, it's definitely better than when light from nearby objects causes glare. This happens because the AGC (automatic gain control) thinks it's bright and reduces sensitivity. The window frame's reflection is what makes it think it's "bright".


And here are some photos. Video and photo image quality are set to 1 (maximum), with a 2000 kbit stream.




A short test video. I tried to show the image over the course of a day.
For a scene like this, I really should have increased the bitrate from 2000 to at least 3000, since there are a lot of leaves in the frame and it was windy. This had a noticeable effect on the image, and not for the better. The camera’s encoder struggles with lots of small objects, such as leaves, as well as wind, rain, and snow. On the other hand, this made for a more realistic test.
I should also point out how long it takes to switch from "night" mode to "day" mode. I "fast-forwarded" through it in the video, but the timecode gives you a rough idea of how long it takes.


I also made a very short video showing the PTZ in action, but I mainly wanted to highlight the effect of glare from nearby objects, which is shown in the second part of the video.



That’s it. There isn’t much else to test, so it’s time to draw some conclusions.
First, the good news. The camera works: it displays an image, pans and tilts, and connects to a computer and smartphone. It even passed a drop test by accident, falling from a height of one meter onto tile. It works fairly reliably and can record to a memory card, which can be handy in some situations.
Now for the bad news. The software still needs a lot of work. The bundled software won’t record video from the main stream—or at least, I couldn’t get it to output the video. When using other software, the pan-and-tilt mechanism can’t be controlled, though I think it might be possible to get it working. I couldn’t test the speaker, but the microphone works poorly.
The image is rather disappointing. The sensor has pretty good sensitivity, but the color reproduction is off, and the overall image quality is mediocre.
You can adjust the focus manually, but the implementation is poor and it’s awkward to adjust.

In my opinion, the camera was originally intended as a video baby monitor, but the mediocre microphone would get in the way. It would work well for general room monitoring, especially since it comes with a fairly convenient mounting bracket, so installation shouldn’t be a problem. Or it could make a pretty good toy for a teenager, with some practical use too. The camera is inexpensive, and with the DSGMNEW coupon it comes to $24.99.

As always, I’m looking forward to your questions and comments. I also have a little bonus for you.

Here’s a video from one of the sites we monitor. A car rolled down a hill, but fortunately everything turned out all right: the driver got a bit of a scare and was almost unharmed. They also paid for repairs to the gate, whose operators had been torn off.
The cameras are still analog; we’re gradually replacing them with digital ones, mostly Hikvision.
$45.37 ($24.99 с купоном)
Go to store
This page was found when searching for:
3, r80x30-pq камера описание, https://www.kirich.blog/obzory/kamery/432-escam-g02-povorotnaya-ip-kamera-s-razresheniem-1280h720, wifi камера поворотная китай инструкция, инструкция по настройке камеру escam g02 к телефону, escam qr003 камера инструкция, ремонт r80x30-pql, r80x50-pq regbnm, камера r80x30pq poe есть?, r80x30-pq, r80x30-pq камера как настроить, Матрица xm530_r80x20-pq_8m, r80x20-pq отключить подсветку, r80x30-pq ajhvfn потока, настройка besder r80x50 pq, как настроить камеру r80x30 pq, ip camera r80x30 pql cgi, r80p30 pq, камера вай фай ескам руководство, r80x30 pq камера tuay, какая карта памяти нужна для ip wifi камеры видеонаблюдения r80x20 pql, r80x20 pql кто производитель, r80x30 pq камера характеристики, ipd d53l02 bs прошивка скачать бесплатно, камера ipg 80x30psb wpn

Questions and answers

What can the ESCAM G02 pan-and-tilt IP camera do?

It pans through a stated 355° and tilts up and down, connects to a computer or smartphone, and can record to a microSD card.

How much current does the ESCAM G02 draw?

The author estimates a peak of up to 1 A. About 0.2 A is used by the IR illumination, with the rest attributed to rotation.

What problems did the author find with the ESCAM G02?

The microphone performs poorly, the image quality is mediocre, and manual focus adjustment is awkward. The software also has limitations with recording and pan-and-tilt control.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments4

Comments are published in their original language.

  1. Алексей
    10 October 2018 07:15#1
    Спасибо за очень подробный обзор. Вопрос. Тестировали лы Вы эту камеру IP камера WiFi ESCAM G02 720P P2P EU plug? Чем она отличается от протестированной здесь? Спасибо
    0
    1. 12 October 2018 11:13#2
      Так это одна и та же камера, G02.
      0
  2. Дмитрий
    17 December 2018 14:24#3
    Добрый день. Подскажите ПЛЗ как отключить режим день/ночь на камере ESCAM G02. Спасибо.
    0
    1. 19 December 2018 01:50#4
      Честно говоря уже не помню есть ли такая возможность, надо смотреть.
      0

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister