/       /       /    Vensmile i10, a small but interesting computer based on the Celeron 3755U
Support the project on Patreon


Vensmile i10, a small but interesting computer based on the Celeron 3755U

$112.00
Go to store
As part of the “move” project, which I started in these two reviews — 1, 2, I bought a small computer.
The computer itself is simple, but it has a few rather nice features. They won't be useful to many people, but I'm sure some will appreciate them.

This mini PC is, of course, very modest in terms of capabilities, and I don't yet have everything needed for real-world use. That didn't stop me from testing it, though, and that's what this review is about.

I needed a computer to replace an old mini PC that I'd modified several times and which featured in this review.
I use this computer as a NAS, for storing backups, as a test “sandbox,” and for various other small tasks.

The computer normally costs $112, but the seller had it on sale for $106. There was also a permanent $3 coupon, so I paid $103 :)

Since the device arrived “empty”—that is, without Wi-Fi, a drive, or RAM—the testing section won't be as extensive as usual. On the other hand, I'll take a closer look at the hardware, which I found more interesting.

First, the specifications.
Operating system: Not installed
Processor: Celeron 3755U
Graphics: Intel® HD Graphics, 8th generation
Memory: up to 8 GB, SODIMM DDR3L, 1 slot, not installed
SATA — 1 x SATA 3 Gbps + 1 x mSATA
Internal interfaces — 1 x mPCIE
LAN — 2x Gigabit LAN
Video outputs: HDMI and VGA
External interfaces: 4x USB 3.0, 2x RS232
Audio output — 3.5 mm jack
Dimensions: 135 x 127 x 39 (excluding feet, antennas, and connectors)
Weight: 700 g

The computer arrived in a sturdy box, with another little box inside it, like a Russian nesting doll. The inner box had no markings at all. When I picked up the package at the post office, I noticed how heavy it was for its size.
There's a QR code on the outer packaging, but it leads somewhere I couldn't access.
The contents are as simple as can be: no bubble wrap, just the computer, power supply, and cable.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The computer's package contents are very bare-bones:
1. Mini PC
2. Power supply
3. Power cable

No manuals, warranty cards, or anything else.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Here's a small snag: there were no SATA cables in the box, neither the power cable nor the data cable.
I probably would have let it go, but some buyer reviews include photos clearly showing that those cables—and presumably mounting hardware in a bag—were included.
So, should I open a dispute? And if so, what's the best way to handle it?
I wouldn't say I absolutely need these cables, but it's a bit inconvenient without them.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The power cable, of course, doesn't have a European plug :( Fortunately, the connector for the power supply is perfectly standard, and this kind of cable is usually easy to find. No need to hunt for adapters.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The power supply is rated for an output voltage of 12 V and a current of up to 5 A.
It looks like a generic, no-name power supply.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Of course, I immediately tore the power supply open without mercy. I'm not about to plug just anything into my favorite outlet. :)

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Further disassembly and a detailed inspection are hidden behind a spoiler, so as not to traumatize the delicate sensibilities of the power supply rights protection community.

And here's the beauty. No, not the hunchback sitting on the matchbox, but the bigger black one. :)
The case is a rich black, with prominent fins on top.
Since cooling is passive, the black finish is definitely useful; it helps dissipate heat a little better.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Here's a quick look at what we've got:
Front
Power button
4 USB 3.0 ports and 2 COM ports. These two hardware COM ports are the computer's standout feature. Many will consider them obsolete, of course, but not the people who actually need them—and that's precisely because they're obsolete.

Rear
Audio jack, oddly labeled as a microphone input.
Two Ethernet ports, both gigabit—another nice touch, or rather, two of them :)
HDMI and VGA monitor outputs.
12 V power input

The sides have a couple of blanking plugs in addition to the ventilation holes. This computer may be sold with a WiFi module installed, so these are holes for mounting the antennas (there's an identical hole on the opposite side).
There are four rubber feet on the bottom (another plus: they're soft and dampen vibration well), as well as holes for mounting a hard drive and a VESA mount (not included).

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

A comparison photo with the computer from this review; before long, the two will be working together.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

That wraps up the exterior inspection. Let's move on to the internals, especially since I bought the computer with nothing in it, so I was going to have to take it apart anyway.
The bottom of the computer is secured with four long screws that thread directly into the top cover.
Interestingly, the front and rear panels are removable and made of aluminum too. In fact, the entire case is aluminum.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

A few general shots—I got carried away.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U


Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The assembly is very neat. Lately, I've been impressed by the quality of Chinese computer hardware—it looks every bit as good as a name-brand product.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The board is marked GBDW3 — Ver.A.
You can see a SATA connector, as well as a connector for the front panel, though it isn't used in this computer. If you want, you can connect a reset button and LEDs indicating hard drive activity and power to it.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Speaking of the power button, the manufacturer used a rather nice little button with a built-in LED and the appropriate markings.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

There are three connectors inside:
1. For one DDR3 RAM module. According to the processor specs, you can use a module up to 8 GB.
2. MPCIE for expansion cards, such as a WiFi module.
3. MSATA for an SSD.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

There are fuses next to the USB ports. There are two (dual) ports, plus space for a third, but that spot is occupied by a COM port—even though a fuse for that port is present.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

There's also a fuse on the opposite side, again for a USB port that isn't fitted, marked USB4.
You can see that the board is very versatile and can be configured like a kit. As an engineer, I can say that designing a board this versatile isn't easy—the developers clearly put in a lot of effort.
The manufacturing date is also visible: May 2016.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The board is literally packed with power converters. At first, I even thought the top side of the board consisted almost entirely of them, and I wasn't far off.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

A few notes on the components installed on the top side of the board (though which side is top or bottom is rather relative)
1. CH7517, this chip is familiar from the previous computer: it's a DisplayPort-to-VGA converter.
2. The computer's input power switch.
3. TPS51117 from Texas Instruments; this chip is a synchronous step-down converter.
4. 25Q64FVS, a memory chip that stores the BIOS firmware.
5,6. A pair of small step-down converters.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The CPU power supply section uses a three-phase converter. Tantalum capacitors are visible at the top. In fact, this computer uses only tantalum and ceramic capacitors—there are no conventional capacitors at all.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

All right, let's keep taking the computer apart. This part is mostly for the curious, since you don't need to get in here to install memory, a drive, and so on.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

An aluminum plate is installed between the case and the processor. The plate is either uneven, or they simply applied too much thermal paste, but one edge is noticeably raised.
In any case, the tests will show what's really going on.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

I mentioned above that the computer is quite heavy. Well, the case itself, which also acts as a heatsink, accounts for about half the weight. On the left is the heatsink by itself; on the right is the fully assembled computer with a hard drive installed.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

A couple of general shots of the circuit board.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U


Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

I'll tuck some photos of individual sections under a spoiler, since they're mostly of general interest and are likely to be useful mainly to repair technicians.

Individual components installed on the underside of the board.
1. The “heart” of this device, the Celeron 3755U SoC. I’ll point out the four holes at the corners, clearly intended to press the board against a heatsink. But in this computer, the four screws at the corners of the board do the job just fine, with virtually no bending. After assembly, I simply pressed the board down with my finger near the processor.
2. Winbond Super I/O chip IT8728F. This is exactly the chip I was missing in my previous computer to add two hardware COM ports.
3. SP213EEA, a level-shifter IC for the COM port. It’s strange that the chip handles both ports, while there’s room for a second identical chip visible on the left.
4. Four-port USB 2.0 hub GL850G.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

1, 2. A pair of PWM controllers for powering various parts of the computer.
3. ALC662 handles analog audio.
4. A pair of RTL8111E chips handle gigabit Ethernet.
5. Another PWM controller, though I have no idea what it powers.
6. Two simple logic ICs, the same kind as in my review of the “big” computer.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

And here’s what I was afraid of.
The package was supposed to include a right-angle SATA cable with a “mirrored” connector orientation.
When I tried to connect a regular cable, it either hit the front panel or the cover.
I also had to use the power cable from my previous computer for testing. I’ll have to either make one myself or install a drive in the mSATA slot.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

After finding a cable with the shortest connector, I managed to fit the drive, but the cable is long, and getting it into a case this small is quite a puzzle, I can tell you.
I also had to rummage through my stash to find four short black countersunk screws.
But anyway, I screwed in the hard drive (a regular 250 GB one) and moved on to testing.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

My first test was measuring the computer’s power consumption.
Power consumption was measured upstream of the power supply.
1. Computer off; essentially, this is the power supply’s own no-load consumption.
2. Power consumption at the desktop.
3. LinX running.
4. I ran 3DMark and measured peak power consumption; the average held at around 20–21 W.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Since I’ve got it up and running, here are a few words—or, more precisely, a few photos of this computer’s BIOS.
The BIOS is almost exactly the same as the one I saw on this computer. I’d even say they’re identical.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U


While inspecting the motherboard, I started to wonder whether I really had two COM ports, since there’s only one level-shifter chip installed.
For testing, I used a mouse with a COM port. It’s pretty much a relic by now, but it works perfectly well for checking the ports. The mouse worked without any problems on both ports.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Just a photo of the computer powered on. Despite its unusual design and oddly placed connectors, it actually looks pretty nice :)

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Now we can move on to the software tests.
When I reviewed the previous computer, I installed the operating system twice: first on a regular 2.5-inch hard drive, then on an SSD.
Rather than reinstalling the system, I simply took a regular drive with Windows 7 already installed and connected it to the computer under review. Not only did the system boot without any problems, it didn’t need any drivers either—in other words, all the drivers from that review work here too. Just in case, here’s a link to them.
The only thing that went wrong was that Windows lost its activation, but that didn’t get in the way of my tests.
The screenshot shows the processor model and its 1.7 GHz clock speed.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Part of Device Manager. I didn’t expand every section, since I don’t see the point; I’ll show only the main ones.

Vensmile i10, a small but interesting computer based on the Celeron 3755U

The network adapters are relatively basic, but offer plenty of settings.
I’ve already tested the performance of these chips and can say they deliver a full gigabit. They’re also connected to the PCI-e bus, so they aren’t the “budget” USB versions, which is definitely a plus.

Vensmile i10, a small but interesting computer based on the Celeron 3755U

By the way, about USB.
The speed is quite in line with the USB 3.0 interface. The screenshots show a test using an external USB drive. Just to be safe, I ran the test with two different versions of Crystal Mark.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

For some reason, CPU-Z thought I had a Core I7-4650U installed. How it came up with that is a mystery to me. I only noticed it myself while preparing the material for this review.

Vensmile i10, a small but interesting computer based on the Celeron 3755U


Unfortunately, the processor has only two cores. I’ve gotten so used to quad-core processors lately that this already seems unusual to me.

Vensmile i10, a small but interesting computer based on the Celeron 3755U

After inspecting it, I moved on to stress tests.
Two consecutive runs of LinX only brought the processor up to 63 degrees. I’d say that’s a pretty good result.
The test was run at an ambient temperature of about 26 degrees, while the computer will be used somewhere that sometimes reaches 40–45. So even in the worst case, the temperature shouldn’t exceed 78–83 degrees.
The performance isn’t exactly impressive, of course. For comparison, the Core-I3-5010U scores 45000 in this test, while my old Core 2 Duo E7500 gets about 14000 (in 32-bit mode). The one under review managed only about 12500.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U


Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Next came the standard 3DMark test, partly as a performance test and also as a heat test.
The processor warmed up a little more here, reaching 67 degrees. I think it would have gotten hotter if I’d run the test longer, but since I don’t need its 3D capabilities, I was fine with this result. For home use, at 25–30 degrees, I think it’ll have plenty of headroom.
The performance gap is much smaller here: the Core-I3-5010U scores 5300 points, while the old GeForce 210 manages just 2700.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U


Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Cinebench showed roughly the same performance as the Core-I3-5010U in the graphics test, but fell noticeably behind in the math test. The Core-I3-5010U scored 17.9/2.4; the Core 2 Duo E7500 with a GeForce 210 did even worse, at 6.85/1.4.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

And here are a couple of tests just for the record; they don't really serve any other purpose.
7zip

Vensmile i10, a small but interesting computer based on the Celeron 3755U

WinRAR

Vensmile i10, a small but interesting computer based on the Celeron 3755U

I took a few thermal images during the tests.
First, the temperatures of the case and power supply after the 3DMark tests.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

The temperature of the hard drive and the computer's internals.
Judging by the measured temperatures, I wouldn't recommend using a regular hard drive; an SSD would be a better choice. SSDs tolerate heat better and use less power.

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

A photo of the computer opened up after warming up. Interestingly, the highest temperature is around the mSATA connector, even though the processor is near the RAM slot.

Vensmile i10, a small but interesting computer based on the Celeron 3755U

As always, I'll list the pros and cons of this computer and share my own opinion of it.
Pros.
Passive cooling.
Silent operation (with an SSD installed)
Compact size
Good build quality.
No overheating
A wide range of interfaces — USB 3.0, RS232, HDMI, VGA, Gigabit LAN.
Low power consumption
Price

Cons
A regular hard drive may overheat if installed.
The power supply could use some modification
No mounting hardware or SATA cables included (possibly just an isolated case).
Only one RAM slot
Performance isn't particularly high.

My opinion. What can I say about this computer? It definitely has more pros than cons—that's a fact. Of course, there are a few shortcomings, especially with the power supply, which should ideally be modified if the computer is going to run around the clock. The four USB 3.0 ports and two gigabit network cards are definitely welcome, and the pair of hardware COM ports speaks for itself. Of course, most people will ask what those ports are doing on modern equipment. The thing is, this computer is also well suited to industrial use, where time moves a little more slowly than in the everyday consumer world, and those ports are still used quite often. The lack of active cooling makes it even more suitable for that kind of use: there's nothing to clog up with dust, and no fans to replace.
The only thing I'd recommend for industrial use is not to buy the computer fully assembled, but to install the memory and drive on site, using products from reputable brands. It costs more that way, but it's more reliable.
You can also use this computer as a perfectly good desktop replacement—for example, for internet browsing, multimedia, and gaming. Of course, you won't be able to run demanding games on it, but it should handle older 3D games just fine. I think even World of Tanks should run reasonably well.
And don't forget that you can connect two monitors to the computer.

Sure, you could say the computer is underpowered, and plenty of people have machines at home that are many times more powerful. But then again, how many fully fledged computers can you take a photo like this with? :)

Vensmile i10, a small but interesting computer based on the Celeron 3755UVensmile i10, a small but interesting computer based on the Celeron 3755U

Thanks for reading. As always, I'm looking forward to your questions, suggestions for tests, and just your thoughts on this device.
I hope you found the review useful.
$112.00
Go to store
This page was found when searching for:
1, маленький компьютер на базе celeron 420, vensmile mini pc ipc что там внутри разобранныи, vensmile i10 hfp,jhrf, vensmile i 10 биоса, vensmile i10 миникомпьютер, vensmile i10 bios, пк на базе celeron 2955u, vensmile i10,, как подключить диск 2,5 sata к 2 пиновому разъему на компе, vensmile i10, компьютер i10

Questions and answers

What ports does the Vensmile i10 have?

It has 4 USB 3.0 ports, 2 hardware COM ports, two Gigabit LAN ports, HDMI, VGA and a 3.5 mm audio jack.

What comes with the Vensmile i10?

The reviewed unit had no RAM, drive or Wi-Fi. The box contained the computer, power supply and power cable, but no SATA cables.

Is the Vensmile i10 suitable for industrial use?

The author considers it suitable thanks to passive cooling and two hardware COM ports. He recommends installing RAM and a drive separately, using established brands.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister