/       /       /    A brief look at a small mSATA-to-M.2 adapter
Support the project on Patreon


A brief look at a small mSATA-to-M.2 adapter

$1.98
Go to store
I was gradually running out of free disk space, so I decided to expand my “living space.” I also remembered that I had an M.2 SSD lying around since spring, along with an adapter that, as it turned out, I’d bought by mistake.
After browsing AliExpress, I found a suitable option—or, more precisely, the cheapest suitable one—and ordered it. So today, here’s a mini-review of a simple little thing: an mSATA-to-M.2 adapter.



Last time, I accidentally bought an M.2-to.... M.2 adapter. It happens. Having learned my lesson the hard way, I looked more carefully this time and found the cheapest option. It cost $2.84. Shipping was paid, but it came with tracking and a courier delivered it to my door, so the seller gets a thumbs-up.


The package includes the adapter itself, as well as a little screwdriver and mounting hardware.


The second problem I ran into last time was that the adapter was broken. No, not in the sense that it arrived nonfunctional; the adapter’s circuit board is simply designed so you can trim it to the required size by snapping off the excess parts.

The size markings are on top, showing which lengths the adapter supports.


There’s nothing on the bottom—well, almost nothing.


The adapter is essentially just a circuit board and a connector; there are no electronic components. Only the power and SATA lines are routed, so this adapter is suitable only for installing an M.2 SSD in a device with an mSATA SSD connector.


The included screwdriver is, of course, extremely cheap. Still, there’s no point expecting anything fancy: its job is to tighten two or three screws, and it’ll do that just fine. Plus, you don’t have to go looking for your own screwdriver in a drawer.


Adjusting the adapter to fit the length of the SSD is very simple. Unscrew the standoff that secures the M.2 SSD board and move it to the required position. You can snap off the excess PCB material or leave it in place; it makes no difference to how it works.


As you can see, it supports four M.2 drive sizes: 2230, 2242, 2260, and 2280. The first two digits indicate the module’s width, and the last two its length. My SSD was a 2280, the largest size.
The adapter also supports two mSATA form factors, but the short ones I’ve come across were all mPCI-E boards, while mSATA drives were only available in the longer size. Also, as I mentioned above, only the SATA and power lines are routed. Although mPCI-E connectors can carry SATA signals, they’re wired differently, so this adapter works only with mSATA.


In theory, you could insert it the wrong way, but it would be very difficult because the key in the connector gets in the way. The correct orientation is shown on the right.


Insert the M.2 board into the connector. Until it’s screwed down, the connector’s spring contacts hold it up above the adapter.


Secure it at the other end. By the way, you don’t need to unscrew the retainer all the way; just loosen it noticeably, then bend it back a little.


The holes used to mount the adapter in place of an mSATA drive are partly covered by the M.2 board. At first, I didn’t think much of it and figured I’d deal with it later.


As you can see in the comparison photo, the outer holes are used when replacing one drive with another (or, in my case, simply installing one). The photo also gives you an idea of their relative sizes.
The M.2 form factor is being actively promoted these days, and mSATA is officially considered obsolete. But in my opinion, mSATA was more convenient in its own way, since it was effectively available in just one size. M.2 drives, on the other hand, come in all shapes and sizes: they can have different lengths, so when replacing one device with another, you can easily find that your old drive won’t fit because it’s simply too long.


The third thing I was worried about was whether it would fit. As I mentioned above, M.2 drives can be quite long, and mine is exactly that kind. The space in the computer was originally designed for mSATA, so although I checked before ordering whether I had enough room, I was still a little worried.


Fortunately, the adapter fit without any problems, which was a bit of a relief :)
To save money or space, the computer manufacturer installed only one mounting post to secure the mSATA drive. In my case, that could break the adapter, since it is noticeably less rigid and longer than an mSATA board.


And here’s where my failure to think things through before installation caught up with me. I quickly screwed the adapter board in place and was pleased that it fit without any problems. But when I went to install the SSD, I realized that tightening the retaining screw from underneath wasn’t very convenient—or, to be precise, it was downright inconvenient :)
So, first you need to put the screws (one in my case) into the adapter’s holes, then mount the M.2 SSD on the adapter and secure it, and only then install the whole assembly in the computer.
It was obvious enough, but I was in a hurry—I really wanted to get it installed as soon as possible, and I completely overlooked this step.


That’s it. The last potentially tricky step—putting the cover back on—also went smoothly. There was a chance the SATA cable might press against the assembly or break the adapter, but it turned out there was still a little clearance.
There’s still a free mPCI-E slot. I’m thinking of putting either an RS232 converter or something else useful in it.


I turn on the computer and see the new SSD alongside the two existing ones. That gives me 250+480+240 GB in total. The question is, how long will that last? In fact, all the computers at home have constant access to a central storage server, where all the automatic daily backups are saved, along with movies and so on. The computer itself stores data that I either need more often or that gets backed up, so to be on the safe side, I “keep my eggs in two baskets.”


You’ve probably noticed that the new SSD shows up as Disk 0. The computer usually boots from that drive—or rather, it’s first in the list of drives to search for an operating system.
On the first startup, the computer notified me that there was no OS on it, then created a bootsqm.dat file after booting. I didn’t delete it; I just hid it.


I don’t see any point in testing the speed. The SSD works perfectly normally, a quick check of the copy speed was entirely satisfactory, and nothing disconnects.

To sum it up briefly: the seller was decent, provided a valid tracking number, the package arrived quickly, and the price was right.

I mentioned the tracking number for a reason: of the roughly 25 packages I’m waiting for from AliExpress, only about 15 can actually be tracked. One seller not only sent two orders in a single package, but also gave me a fake tracking number. According to it, my package had already been delivered in another city, but it arrived at my place a week later. Another package from the same seller can’t be tracked at all.

By the way, there’s also a reverse adapter that might come in handy for someone.


That’s all. I hope you found the review useful.
$1.98
Go to store
This page was found when searching for:
можно ли вставить ssd msata в слот m2, переходник с msata на m 2, https://www.kirich.blog/obzory/kompyutery/508-nebolshoy-obzor-nebolshogo-perehodnika-msata-m2, адаптер 2 в 1 msata m.2 sata 3.0 для подключения винчестера, будет ли рабобать ssd m.2 через переходник msata, переходник винта 2,5 чтобы поставить на пк, переходник sata m2 обзор компьютера, flash connector переходник msata, схема переходника msata to sata, переходник m.2 ngff msata ssd на sata 3,0, 2,5, установка м2 в msata, адаптер waveshare pcie в m.2 обзор, msata to m2 key m, напряжение питания в переходе с msata на m.2, как подключить одновременно 2 планки в переходник конвертер m.2 ngff/msata в sata3.0, переходник для ноутбука msata на m.2 2280 m key b key, переходник msata sata nvme м2, что изменится если перейти с msata на m2, переходника m.2 msata, msata переходник на m.2 2280 pcie 3.0, для установки двух 2msata, адаптер msata m.2, тест переходника м2 ssd sata, переходник для формат m.2, m.2 sata переходник тестирование

Questions and answers

Which M.2 SSD sizes does the mSATA–M.2 adapter support?

It supports 2230, 2242, 2260 and 2280 drives. The mounting post can be moved to match the drive length, and excess board material can be snapped off.

Will the mSATA–M.2 adapter work with a PCIe or NVMe SSD?

No. The adapter routes only SATA and power, so it is for M.2 SATA SSDs; it is not suitable for mPCI-E drives either.

Did the mSATA–M.2 adapter fit and work in the author's computer?

Yes, it fit in the computer, the case closed, and the computer recognized the SSD. The author recommends installing the adapter's mounting screws first, attaching the M.2 SSD, and then fitting the assembly into the computer.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments6

Comments are published in their original language.

  1. 23 December 2017 18:14#1
    Спасибо за обзор! Вопрос не по теме, просто интересно. Какой программой делаете ежедневные бекапы?
    0
    1. 23 December 2017 20:15#2
      Second copy
      На основном компе расшарена папка, а на "сервере" установлена программа, которая создает копию этой папки. Раз в сутки проверяет изменения и синхронизирует их.

      +2
  2. Денис Данилец
    22 May 2018 12:25#3
    Добрый день, похоже вы единственный в рунете, кто озадачился данным вопросом, спасибо вам за это. А как у вас с интерфейсами дела обстояли на данном SSD? Я тут оказался ищя решение своей проблемы у меня SSD, коий приглянулся, с интерфейсом pci-e 3.0 (Intel 760p series), не могу разобрать встанет ли он через переходник в msata на мой ноут. Подскажите если не сложно. Заранее спасибо.
    0
  3. 6 January 2019 21:03#4
    Я правильно понимаю, что с обратным переходником я могу в слот для ssd поставить старый винт 2,5 sata3 ? или всё ;е переходник для mSata?
    0
    1. 6 January 2019 22:08#5
      Как-то даже задумался... Я таких переходников не встречал, но в принципе если на разъем выведены линии SATA, то почему нет. Хотя что-то мне подсказывает что ерунда будет.
      0
      1. 6 January 2019 22:12#6
        Это чудик знакомый, у него ссд 128, мало памяти, сам заказал себе винт, разобрал для замены и там его ждал сюрприз, вот теперь пытаюсь ему как то помочь. Пока ничего подобного не читал и не встретил в сети таких чудиков, которые дают в зад со скоростью винта :)
        0

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister