/       /       /    YUNDOO Y2, a TV box with the new S912 processor
Support the project on Patreon


YUNDOO Y2, a TV box with the new S912 processor

$55.99
Go to store
Around the end of last year, two new processors (SoCs) for TV boxes were announced.
They were made by Amlogic, but things worked out so that the weakest version, the S905, came out first. The S912 was supposed to follow, but its release was delayed considerably, and TV boxes with it have only started appearing now, almost 10 months later.
So today I'm reviewing a TV box based on the new S912 SoC. Inspection, tests, teardown—the usual.

Amlogic also released an intermediate version, the S905X. I never quite understood why, given that TV boxes based on the S912 started appearing just a month later.
But this table offers a little explanation: it shows that an S905D version is also expected.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

I've already reviewed a device based on the S905X, and it really does occupy a middle position in the S9xx lineup, perhaps even closer to the budget segment. So in this review, I'll try to make a brief comparison of all three processor models (SoCs).

First, the specifications listed by the manufacturer.
CPU — Amlogic S912
Number of cores — 8
Graphics — Mali-T820MP3
RAM — 2 GB
Flash memory — 16 GB
Wi-Fi: 2.4 / 5 GHz
Bluetooth: Bluetooth 4.0
LAN — Gigabit Ethernet
Ports: 2x USB 2.0, SPDIF, HDMI, RJ45, AV, SD card
H.265 support
4K resolution support
Operating system — Android 6.0
Dimensions — 135 x 100 x 25 mm

The TV box arrived in a fairly sturdy cardboard box, which earns the manufacturer a small plus.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The box has two levels: the TV box sits on top in a foam sleeve, with everything else underneath.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The package includes:
1. TV box
2. Power adapter
3. HDMI cable
4. IR remote control
5. Manual

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The manual is large, but essentially pointless: it won't help much if you're inexperienced, and anyone who knows what they're doing can manage without it.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The included remote is small and quite convenient. It uses the standard pair of AAA batteries.
For some reason, there's an LED at the top of the remote, even though it isn't programmable.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

1. By the way, the manual shows a programmable remote, but the box comes with a regular one. You can see the difference in the photo.
2. The HDMI cable is standard, with no gold-plated connectors or anything like that.
3, 4. The power adapter has the familiar plug and outputs 5.2 V at up to 2 A. I was a little surprised to see a 5.2 V adapter rather than the usual 5 V.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

As a little extra, let's take a look inside the power adapter.

And now, little by little, we’ve made it to the TV box itself.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

It’s quite compact, with a plastic case that looks neat enough.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The case shape stands out from the “square” alternatives.
There’s an SD card slot on the left side.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

All the connectors are on the back of the case.
1. Power connector
2. Digital optical audio output.
3. 3.5 mm AV output for analog audio and video. The cable is not included.
4. Ethernet port.
5. HDMI output
6. Two USB 2.0 ports. Probably the only minor drawback; three would have been better.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

There are quite a lot of ventilation holes on the bottom—in fact, almost the entire base is covered in mesh.
There are also large rubber feet underneath. Even before turning the case over, I noticed that it barely slides around on the table; the feet are long and fairly soft.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

Let’s open it up. This took quite a bit of effort, so I don’t recommend taking the box apart unless absolutely necessary. There are lots of awkward clips, plus a couple of self-tapping screws under the feet.
The two halves of the case fit together perfectly, and overall it looks very good.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The rest of the teardown is under the spoiler.

After inspecting it, I can say that from a hardware standpoint, this TV box looks excellent. Now let’s move on to the software.

When you turn it on, this is the launcher you’re greeted with. I’ve seen something similar before, but this one also has some “bells and whistles,” like animations whenever you move between menu items.
It looks simple and a little unusual, but actually quite nice.
There’s weather information at the top, though it isn’t visible in this screenshot—I set it up later. The information is in English, though :(

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

Besides the home screen, there are several dedicated sections where some of the installed apps are grouped together.
Four of the five screens have a button that opens the full list of apps.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

And here are the apps themselves. At first, I thought there weren't many, but when I started putting this review together and testing different programs, it turned out there were more than I expected. To be fair, most of them can be deleted right away, since they're not useful—but more on that later.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The control panel interface itself is completely standard for the installed version of Android 6.0.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

I happened to find a small but very handy setting for the power button (which is only available on the remote, since the box has no button of its own). You can choose whether to turn the box off or put it into sleep mode.
One of my friends once asked about this feature, but I hadn't come across it before.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

There's a separate menu for video output options.
The only unusual item here is the last menu. I couldn't figure out what it does, though, since I have no way to test it.

YUNDOO Y2, TV box with the new S912 processor

The additional settings menu will be familiar to many, so I won't go through it.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor


YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

Trying to update the software didn't get me anywhere; there are no newer versions.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

The specs list 2 GB of RAM, but only 1.7 GB is available to user applications. Even after extensive testing, though, memory usage never went above 50%.
As for flash storage, the box reports 16 GB installed, with 1.19 GB in use. In reality, users have access to about 11.5 GB of flash storage, which, in my opinion, is more than enough for most uses.

YUNDOO Y2, TV box with the new S912 processor

As usual, before the main tests I check the Wi-Fi.
The box found plenty of access points without much trouble, although it struggled to detect mine.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

I had to skip the usual SpeedTest run. I tried installing it, but it crashed with an error whenever I tried to launch it. After about 10 failed attempts, I gave up on the app.
Interestingly, this wasn't the first software issue I ran into.
As I mentioned above, this TV box has a 5 GHz module, but I couldn't confirm that in software. AIDA, which I use to check TV boxes, also crashed whenever I tried to open the Network menu while Wi-Fi was on. With Wi-Fi off, the menu opened without a problem, but there was no information there either.
The situation is further complicated by the fact that there isn't a single 5 GHz access point near me, so I have to rely on the product description and the wireless module's specs (which I trust more).

So I had to turn to iPerf.
The screenshot below shows two tests. The first shows the worst connection conditions I can get at home: 12 m from the access point, with a bunch of concrete walls in between. The one on the right shows performance in the same room as the router.

The connection is, let's say, average. I've seen better and worse. At the greatest distance, it was unstable.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

Let's take a quick look at the box from CPU-Z's perspective.
Everything matches the specs: 8 cores and a T820 GPU. I happened to notice the line “Scaling Governor” — Interactive. It used to say “Hotplug.”

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

According to CPU-Z, the box has root access.
By the way, the home screen and apps are displayed at 1920x1080 resolution.

YUNDOO Y2, TV box with the new S912 processor

The information from AIDA doesn't add anything new compared with CPU-Z. And it won't show the one thing it could have told us (whether the 5 GHz band is available).

Now we can finally move on to the performance tests.

Next, I'll take a look at the software the manufacturer installed on the box.

In Full HD mode, video output is completely correct in all the installed players, although some apps displayed it incorrectly in previous tests.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

In addition, video playback was tested in various formats.
1024x768_h265_AC3.mkv (no sound)
2560x1600_AAC .mp4
3840x2160_AAC .mp4
4096x2160_AAC .mp4
gopro-hero-3-be-avc-high@l5.1-4096x2160-12p-aac-2ch.mp4
GraysPeak8HDR_Dolby AC3.mp4 (no sound)
LG 4K Paris_AAC.mp4
LG 4K Story-of-Earth_AAC.mp4
LG_Chess_HDR.mp4
Philips_UHD_supershopdemo_1.mp4
samsung-note-3-3840x2160-high@l5.1-AAC-2ch-2.mp4

4K HD.Club Changhong-Furano-100mbps.mp4

The video files played correctly, but files with AC3 audio played in complete silence :(

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

I also tested the Sony_4K_HDR_Camp.mp4 test file, which last time managed no more than 2 fps.
Only MX_Player_Pro_1.8.3 could play it, but the problem was the same as last time. The frame rate was a little higher now, closer to 4 fps, but still, nobody would watch it like that.

YUNDOO Y2, TV box with the new S912 processorYUNDOO Y2, TV box with the new S912 processor

Now it's time to sum things up and share my personal impressions of this box.
Pros
Good construction
No overheating
2 GB of RAM and 16 GB of flash storage
2.4/5 GHz WiFi (I can't confirm the 5 GHz band experimentally)
Gigabit Ethernet.
Decent power supply

Cons
Some software issues
WiFi could be a little better

My opinion. First, the construction. In this case, my only hardware complaint is the average WiFi sensitivity. Yes, average, because I've come across both worse and better.
Otherwise, no complaints: the components (Hynix and Samsung memory), good cooling system, dual-band WiFi, 2/16 GB of memory, decent power supply (barely gets warm during use), and a neat remote control. It's been a long time since I've come across a box with no overheating issues at all.
Unfortunately, I can't say the same about the software. A lot of apps are installed, but most of them are useless. Some apps have problems (those that access the WiFi module), and Epic Citadel renders incorrectly (I suspect this is the case with all boxes based on the 912 processor).
But it's worth noting that if an app doesn't work, it still won't work on the tenth try; and if it does work, it'll work fine on the tenth try too. In other words, the software is stable.

I almost forgot: about the «green screen» issue already familiar to many users of boxes based on the 912 processor—a brief green screen during video playback.
Since I already knew about this issue, I sat there staring at the screen, waiting for it to happen. But I never saw it.
I'm not claiming the issue doesn't exist. Maybe it requires certain conditions, such as a file encoded with specific codecs or something else, but I haven't seen it so far. I tested it with my 1920x1080 test file at 10 Mbps and a 4K file at 100 Mbps.

Performance-wise, the box is decent, but I was probably expecting more. That's not the fault of this particular product, but of the new Amlogic S912 itself, which is currently the top model in the S9xx lineup. Maybe the software is still immature and we need to wait for an update; or maybe the processor just isn't as powerful as everyone expected. I can't say for sure.

Overall, my take is this: there are no hardware problems, but the software still needs a lot of work. Let's hope there will be a software update, because the hardware is decent. I have another TV box based on the S912 on my desk right now, which I bought for testing. The results are somewhat different, but more on that later.

That's all for now. As always, I'm looking forward to your comments and suggestions for tests.
By the way, that's the price without any discounts, so if you can find an 8% off coupon, it'll be an even better deal.

The product was provided by the store for review.
$55.99
Go to store
This page was found when searching for:
yundoo y2, 912 процессор

Questions and answers

What ports does the YUNDOO Y2 TV box have?

It has two USB 2.0 ports, HDMI, RJ45, an optical SPDIF audio output, AV, and an SD card slot.

Does the YUNDOO Y2 with the S912 overheat?

The box was barely warm during use. Heat from the processor is conducted to a heatsink and a metal plate in the lid.

Did the author see the YUNDOO Y2’s “green screen” video issue?

No. The author did not see it with test files at 1920×1080 and 10 Mbps or 4K and 100 Mbps, while noting that the issue may depend on the conditions.

The figures from this review are in the measurement database: Other devices


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister