Affordable USB video capture device
$4.31
Tasks involving analog signals include, for example, digitizing old video recordings, working with analog video cameras, and so on. Special video capture cards are often used for these tasks, but sometimes they're overkill and expensive, especially for occasional use.
A friend asked me to buy him a USB video capture device for one such task. He needed to connect an analog camera to a laptop. He already had the camera, and we needed to solve the problem on a very tight budget. We settled on a fairly well-known capture device: it was inexpensive and had all the features he needed.
So, the product was chosen, ordered, and delivered. While I still have the device, I decided to put together a short review, especially since I was curious about it myself. My interest was that I also occasionally have to work with analog video. I used to use a TV tuner, but had to give it up when I switched to a new computer.
The device arrived in a regular thin envelope. Inside, in an ordinary plastic bag, were the device itself and the included accessories. No box, blister pack, or anything like that.

The package includes:
1. Video capture device
2. USB extension cable
3. Instructions
4. Software disc

The instructions are in English, and to be honest, they're not much use. At least, I didn't find anything interesting in them, apart from the resolution specified for the NTSC standard, though I'll come back to that later.

The disc contains software for using the device. One program is very basic; it comes bundled with various USB cameras, endoscopes, and similar devices. The second is more sophisticated, but clearly cracked, since the serial number is provided separately in a text file.
The USB extension cable is about 40 cm long, so it doesn't extend the cable by much.

And here's the subject of the review: a relatively small device with several cables for connecting to a signal source.

Shown next to a matchbox for scale. It looks like a large flash drive. The case has a soft-touch coating and feels soft to the touch.

At one end, under a protective cap, is a USB plug, making it look even more like a flash drive.

At the other end is a bundle of several cables.
The device can record stereo audio, with red and white connectors for this purpose. Video can be recorded through either the S-video or composite (CVBS) input. All the connectors are labeled accordingly.

Here I'd like to take a brief educational detour and explain the differences between analog video signal formats. I've explained this before, but I think it's worth repeating here.
Going back to the days of analog TV—and all these interfaces date back to that era—there are at least five types of signal that can be used to transmit a signal from a source to a receiver. I'll list them in order of increasing quality.
First is RF. It only makes the list indirectly, but since it was used with things like the Dendy, why not? Before DVB-T (T2) came along, it was the worst connection option.
The second method is much better: the composite signal. For some reason, it's often called RCA, which is quite incorrect, since RCA is the type of connector used to carry it. To be completely accurate, RCA is actually the name of a company (Radio Corporation of America). But this connector type is also used to carry other signals.
Formally, this signal type is called a "Composite Color Television Signal" (CVBS), meaning that all the necessary information is carried over a single line.
The connector is yellow. Don't confuse it with the similar single orange connector: orange is S/PDIF.

The third type is also familiar to many: it's called S-video. Unlike composite, it uses two wires. Technically, this is a component signal, but that name never caught on, so it's usually just called S-video. It carries two signals: synchronization (for which CVBS is used), plus brightness and color information. This connection provides better quality than CVBS.
Plug on the left, socket on the right.
1, 2. Ground
3. Luminance and sync signal
4. Chrominance signal.

Adapters that convert a composite signal to S-video are sometimes sold. Its circuit is extremely simple, although for obvious reasons the picture quality will always be limited to that of a composite signal.

The fourth type is significantly better. It’s called YPbPr, though it’s more commonly known as component video.
It uses three cables:
Y - luminance and sync signal.
Pb - blue color-difference signal
Pr - red color-difference signal
It connects via three color-coded plugs: red, blue, and green. Don’t confuse it with RGB, though—they’re a little different.
This connection type can easily carry a 576p signal, which is practically the maximum for CRT TVs.

The fifth signal type is not Scart, but RGB. The connector is included here for a reason, though. RGB connections rarely use RCA (composite) plugs, since they require four lines. And if you add the two audio connectors needed in every case except RF, that makes six cables in total.
In fact, a Scart connector also carries at least audio input and output, a control signal (for example, I once set it up to turn on an amplifier automatically when a DVD player was switched on), and other signals. Scart can carry RGB, composite, S-video, and YPbPr signals.
An RGB connection carries:
1. R - red
2. G - green
3. B - blue
4. Sync signal, usually provided by the composite video signal.

I’ve listed the four main signal types above, but there’s actually at least one more, derived from RGB. It’s derived because RGB is a “pure” signal, meaning it hasn’t undergone any conversion. The other types need a decoder to extract the RGB signal. That’s why RGB is considered the highest-quality option. It’s also why this connection made its way into the world of personal computers, where it became known as VGA. Don’t confuse the two: VGA can refer to a connection type or to an image resolution (640x480).
A VGA connection uses a D-sub 15 connector, which I’m sure many of you have seen.

Here’s a table of image resolutions. As you can see, VGA is 640x480 pixels. But this connection type had plenty of headroom, so it was also used at higher resolutions, with the name changing slightly.

Anyway, I’ve digressed. The reason I brought up VGA is that professional monitors used five separate wires:
1. R - red
2. G - green
3. B - blue
4. Horizontal sync signal
5. Vertical sync signal.
So it’s essentially the same RGB, but with the sync signal split out, and using BNC connectors, which are more suitable for RF signals than RCA plugs.

It’s easy to remember:
1. Composite - one signal
2. S-video - two signals
3. YPbPr - three signals
4. RGB - four signals
5. VGA - five signals
The device under review supports the first two types: composite and S-video.
As usual, I opened it up before testing, especially since it’s very easy to take apart. The case really is made of fairly soft plastic, a bit like very hard rubber. The two halves are held together by pins, so all you need to do is pry them apart with something sharp.

The output cable connects via a plug, which is neat and convenient.

The circuit board is made quite well; I have no particular complaints.

The device works on a fairly simple principle. First, the analog signal goes to an ADC chip, which converts it to digital. This one uses an AMT630A. Chips like this are often found in small monitors. Next to it is an EEPROM chip that stores the firmware for the ADC.
Near the USB connector is a V399 chip. It receives the digital signal, compresses it, and sends it to the computer. Compression is needed to fit the large data stream within USB’s relatively limited bandwidth. There’s another EEPROM chip next to it, this one for the V399.

There are no components on the back of the board.

Let’s move on to the tests. As I mentioned, the included disc has two programs: a simple one and a more advanced one. I showed the simple one briefly in my microscope review; I’ll show the more complex one here.
By the way, there were no drivers on the disc, and the device was detected automatically when connected. I’m running Windows 7 x64.
The software clearly wasn’t designed for this board. It reminded me a lot of TV tuner software, with channel selection and other features typical of that kind of program.
On the left are controls for selecting the signal source, recording, taking screenshots, and adjusting the volume. The buttons are small and awkward to use.

There are a few settings, but in practice they’re pointless: even if you select 720x576 recording, it still records at 640x480. This distorts the image, since the aspect ratio is 1.25 in the first case and 1.33 in the second.

Even recording video with the bundled software was problematic. When I tried, an error message appeared. I never figured out how to turn off the volume control overlay, which covers part of the image.
A simpler program records video without any problems, but again, only at 640x480, with the same aspect ratio distortion.

For the test, I first connected a DVB-T2 tuner to the device and found a test pattern. The colors look fine.

A random frame from a TV program.

Now I’ll show you what the image looks like and how it should look with the correct aspect ratio.
As displayed and recorded:

How it should look.
As you can see, the difference isn’t very large, so it won’t be a problem if you just want to set up simple video surveillance.

One more frame.

After that, just out of curiosity, I connected an analog security camera and took a couple of “photos” of my test pattern.


Overall, I don’t have any major complaints, except that it doesn’t output the native resolution for an analog signal, 720x576, and instead outputs 640x480. The difference is small, but it further reduces the already low resolution and can also cause some issues when converting from one resolution to another. In my opinion, this is the biggest problem. Otherwise, it works pretty well and doesn’t get hot.
By the way, I found one more issue: when the camera moves abruptly (so the whole image changes), the video may briefly freeze.
A brief digression. Many years ago, I occasionally digitized video from a VCR. Old recordings could be tricky: the synchronization would occasionally drop out. To improve stability, I built a board that restored the sync signal and, as a result, improved the quality of the output.

It was built around an LM1881 chip. I probably won’t be able to find the exact schematic for my version, although I still have the PCB layout. You can look it up online if you’re interested; I’ve often seen it mentioned there. Datasheet for this chip.
That’s probably all. In short, the device works, but it has its shortcomings. Still, it’s quite inexpensive, so it should be perfectly adequate for small, non-critical jobs.
$4.31
This page was found when searching for:
zcd-630a-4.3d как запустить, video dvr capture usb 2.0 программа для захвата видео скачать бесплатно, amt630a to usb, программа для пк espada eusbrca63, скачать бесплатно с официального сайта программу для оцифровки av dvr usb 2.0 video, карта захвата видео на чипе ms2107, видеозахват на чипе ms2107 зависает, установка video dvr capture usb 2.0 инструкция на русском, easy capture usb 2.0 инструкция на русском 2024, какой чип amt630a. и ms2100e лучше для видеозахвата, устройство видеозахвата rca, 4, модуль захвата видеосигнала, как видео информация пишется и сохраняется на чипе, как подключить и настроить плату видеозахвата 3000h4c, последняя прошивка для ezcap 284, мшвущ сфзегку гыи ф гыи с, плата видеозахвата espada usb 2.0 to rca/s-video обзоры, easycap v399 driver, описание устройства вдеозахвата усб, устройство синхронизации видео на lm1881, video dvr usb2.0 video adapter with audiu проблемы с видеозахватомpter, usb dvr box, устройство видеозахвата недорого обзор, карта видео захвата с адаптером,magewell подключение к компьютеру
zcd-630a-4.3d как запустить, video dvr capture usb 2.0 программа для захвата видео скачать бесплатно, amt630a to usb, программа для пк espada eusbrca63, скачать бесплатно с официального сайта программу для оцифровки av dvr usb 2.0 video, карта захвата видео на чипе ms2107, видеозахват на чипе ms2107 зависает, установка video dvr capture usb 2.0 инструкция на русском, easy capture usb 2.0 инструкция на русском 2024, какой чип amt630a. и ms2100e лучше для видеозахвата, устройство видеозахвата rca, 4, модуль захвата видеосигнала, как видео информация пишется и сохраняется на чипе, как подключить и настроить плату видеозахвата 3000h4c, последняя прошивка для ezcap 284, мшвущ сфзегку гыи ф гыи с, плата видеозахвата espada usb 2.0 to rca/s-video обзоры, easycap v399 driver, описание устройства вдеозахвата усб, устройство синхронизации видео на lm1881, video dvr usb2.0 video adapter with audiu проблемы с видеозахватомpter, usb dvr box, устройство видеозахвата недорого обзор, карта видео захвата с адаптером,magewell подключение к компьютеру
Questions and answers
What inputs does the USB video capture device in the review have?
It accepts video through S-Video or composite input and records stereo audio through the red and white connectors.
What resolution does the USB video capture device output?
It outputs 640x480 instead of 720x576. The author notes that converting the resolution can further reduce the already limited image detail.
What problems did the author find with the USB video capture device?
Video may briefly freeze when the picture changes sharply. Otherwise, the device works fairly well and does not heat up; the author considers it adequate for small, non-critical tasks.
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments17
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister


Comments are published in their original language.