/       /       /       /    Various products for electronics hobbyists and more, Part 14
Support the project on Patreon


Various products for electronics hobbyists and more, Part 14

Another roundup of assorted products—some I just came across, others I ordered, sometimes more than once.

As usual, a reminder: to keep up with new posts on the blog, I recommend following me on Instagram. I’ll post notifications about every new article there, and might also write about something interesting from time to time - link to account

This charger board has a noticeably higher charging current than the familiar 4056 boards. I ordered the red ones and had no problems. I can’t say anything about the other two types - link.


A small clock with advertised NTP synchronization. I ordered one, and it’s already been shipped. They cost only about $6 - link.


A basic pulse oximeter. I received it; I can’t comment on its accuracy, but subjectively, everything seems fine. It could be quite useful in the current circumstances. It cost about $5; I bought the PI model - link.


An interesting battery tester. It’s rated for 30 V, 10 A, and up to 75 W. More importantly, it can be controlled via Modbus - link.


A VFD display for a PC that can show various information from AIDA. There are two versions, with and without a clock. But here’s the more interesting part: this display, including the USB interface, costs less than a standalone 1602 display, at $18.97–21.73 depending on the version - link.


Small four-digit voltmeters with a 0–100 V measurement range. They’re inexpensive, and I’ve ordered them before - link.


A new electronic load model with better power balancing between the transistors. I wanted to order one for a review, but it didn’t work out. Maybe someone will find it useful - link.


A new converter model from RuiDeng, now with current up to 24 A. Unfortunately, the price is rather high at the moment. It may be worth waiting for a sale, or for them to offer a coupon for a review - link.


Very useful voltage converter boards. The key points are that these are genuine boards, with galvanic isolation and high power, so they’re worth buying even just to keep as spares - link.
I think I even reviewed similar boards at some point.


A clock board for gas-discharge tubes. Key features include Wi-Fi and NTP synchronization. Note: the tubes are not included! Link.


Another little clock, this time with LED indicators and a fairly convenient display. It costs about $15 - link.


ALDP105 relays, supposedly genuine. I can’t vouch for that, but they have good reviews link


Found and added after publication: a very inexpensive 2002 VFD display. At least, I haven’t seen a cheaper one yet. It costs about $15 including shipping - link.
The display comes with a board that includes both the controller and the power supply.


As always, links to interesting products are welcome.
This page was found when searching for:
10

Questions and answers

What are the stated specifications of the battery tester in the roundup?

It is rated at 30 V, 10 A, and up to 75 W, and supports control via Modbus.

What features does the clock board for gas-discharge tubes have?

It includes Wi-Fi and NTP time synchronization. The tubes are not included.

How much does the VFD 2002 display cost?

The post gives a price of about $15 with delivery. The display comes with a board that has a controller and power system.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister