Good price on the UNI-T UTG932E signal generator
$84.49
I needed a generator—not urgently, but when I went to AliExpress and saw a pretty good price, I couldn't resist.
The product page lists it at 90.49. You can take 5 off with a coupon and another 1 off with a promo code from the same page, bringing it to 84.49. The higher-end model in this store seems far too expensive to me, though. I've seen it for around $95–97; I couldn't find that deal again just now, but it's available for 105 here, down from 109, with another 2+2 off using a coupon and promo code.
Here are the specs for both generators. Personally, I didn't think it was worth paying even $10–15 extra for the higher-end model. Based on what I've been able to gather, they use the same hardware and differ only in firmware—which, by the way, can be changed to get 60 MHz without “paying extra or sending an SMS.”

The product page photos give you an idea of what's included. I was also glad to see a universal power supply in the package; hopefully that's the one they'll actually send.

I think you can find the dimensions, appearance, and more detailed information without my help :)

Also, just today someone asked me about a multimeter in the under-3,000-ruble price range. We don't have rubles here, but as I understand it, that's about $40.
One of the requirements was good accuracy. That reminded me of the “old-timer,” the UT39E+.

One drawback (depending on how you look at it) is manual range selection instead of autoranging—you have to select the range yourself. On the plus side, it has a 19,999-count display; the popular 61E isn't much higher, at 22,000.

Its stated voltage measurement accuracy is actually a little better, current measurement accuracy is roughly comparable, and resistance measurement accuracy is worse, though that depends on the value being measured.
It's also almost half the price, at just $34.33 — link
39E+
DC voltage 200 mV/2 V/20 V/200 V/1000 V ±(0.05% + 3)
AC voltage 200 mV/2 V/20 V/200 V/1000 V ±(0.5% + 10)
DC current 2000 μA/20 mA/200 mA/20 A ±(0.5% + 5)
AC current 2000 mA/20 mA/200 mA/20 A ±(0.8% + 10)
Resistance 200 Ω/2000 Ω/20 kΩ/2 MΩ/20 MΩ/200 MΩ ±(0.3% + 2)
Conductance 0.1 ~ 100 nS ±(1% + 3)
Capacitance 20 nF/200 nF/2 µF/2000 µF ±(4% + 20)
Frequency 0–2 MHz ±(0.1% + 3)
Temperature (°C/℉) −40 ~ 1000.0 °C/-40 ~ 1832 ℉ ±(1.0% + 5)
61E
DC voltage (V) 1000 V ±(0.1% + 2)
AC voltage (V) 750 V ±(0.8% + 10)
DC current (A) 10 A ±(0.5% + 10)
AC current (A) 10 A ±(0.8% + 10)
Resistance (Ω) 220 MΩ ±(0.5% + 10)
Capacitance (F) 220 mF ±(3% + 5)
Frequency (Hz) 10 Hz ~ 220 MHz ±(0.01% + 5)
If you know of any other instruments, or links to the ones shown at an even lower price, I'd be grateful if you shared them—and I think other readers would be too.
$84.49
This page was found when searching for:
uni t utg932e обзор, инструкция на русском языке uni t utg932 function generator, купон на utg932
uni t utg932e обзор, инструкция на русском языке uni t utg932 function generator, купон на utg932
Questions and answers
How much does the UNI-T UTG932E signal generator cost with the coupon and promo code?
The listed price is 90.49; a coupon for 5 and a promo code for 1 bring it down to 84.49.
Can the UNI-T UTG932E reach 60 MHz?
According to indirect information, the UTG932E and the higher-end model use the same component platform and differ in firmware. The author says the UTG932E firmware can be changed to reach 60 MHz.
Which multimeter does the author suggest instead of the UNI-T 61E?
The author mentions the UNI-T UT39E+ as an option with good stated accuracy. It has manual range selection, a 19,999-count display, and a price of $34.33.
Calculate manuallyAll calculators
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister
