/       /       /    How to Choose a USB Load
Support the project on Patreon


How to Choose a USB Load

With the widespread use of various mobile devices—and, consequently, power supplies and power banks—that use a standard USB connector, an entire class of electronic loads designed to test them has emerged.
In fact, these loads have a lot in common with regular electronic loads, but their specific applications mean they may have features that regular loads lack. At the same time, they may not be able to do everything their “big brothers” can.

To stay up to date with new topics on the blog, I recommend following me on Instagram. I’ll post notifications about every new topic there, and maybe write about something interesting too - link to my account

You can also subscribe to updates and new articles on the Telegram channel - https://t.me/KirichBlog



They are most commonly used for:
1. Testing the load capacity of power supplies (chargers).
2. Assessing the capacity of power banks

What regular and USB electronic loads have in common is a power stage consisting of a power transistor, a current-monitoring circuit, and, of course, a heatsink, often with a fan. As a result, many of the criteria for choosing a USB load are the same as for a regular one, including current, voltage, and power.


The defining feature of USB loads is that they have the appropriate connectors built in, and this is one of the selection criteria.
Some models have only USB sockets on the board, so you connect power sources using standard USB cables. They usually have at least two types of connectors: MicroUSB and USB Type-C, though the increasingly obsolete MiniUSB sometimes turns up too.
The second type of connection uses a USB-A plug mounted on the board, allowing you to connect the load directly to a power supply.


If you use ZKEtech devices, you can buy a USB adapter for them. This adapter doesn’t offer a wide range of connectors, but it has a couple of key features:
Four-wire connection
Current measurement in monitoring mode, so you can track the current drawn by another load, such as a smartphone.


If you like a particular load but it doesn’t have the connectors you need, that’s not a problem: special adapter boards are available. They can be used as a single unit or split into separate sections for greater convenience.


Another important factor is whether the electronic load supports control of modern fast-charging protocols, such as Quick Charge and Power Delivery. This feature is fairly rare, especially support for Power Delivery, but there are workarounds. For example, you can use one of the connectors to connect a USB tester or a protocol trigger. The first option is preferable, though more expensive.


A tester or protocol trigger can also be connected in series with the load input.


And the final deciding factor is power.
For most household applications, 10–35 W is enough. If you need a device that can test any USB power supply currently available, you’ll need 100 W. That’s the maximum power for the Power Delivery protocol, but if you’re buying a device with room to grow, it’s better to look at even more powerful models: 150–180 W or more.

The simplest, and in some ways the most sensible, option is a resistive load. Of course, you can't adjust the current smoothly here, and the only indication comes from a couple of LEDs. Even so, these loads can be used both to test USB chargers and to estimate the capacity of power banks.
For the first task, you can use the load on its own and switch between current levels. For the second, you'll probably need a USB tester, or at least a stopwatch.
The drawbacks are the lack of current regulation (the current depends on the voltage), a maximum test voltage of only 5 V (higher voltages will cause overheating), and no service features.
The advantage is the price.

You can make a load yourself from several resistors, but it's easier to look at ready-made products. Two options are shown below; they differ in their current range and adjustment increments. The first has three settings: 1, 2, and 3 A. The second lets you set the current from 0.25 to 4 A in 0.25 A increments. The current ratings for both options are specified at 5 V.


Since at 4 A and 5 V the power reaches 20 W, the manufacturer considered cooling and released a model with a fan. But these weren't popular, because for a little more money you could already buy an electronic load.


The adjustable JUWEI USB load addresses some of the drawbacks described above. It lets you smoothly adjust the current up to 3 A and has a maximum power of 15 W over a voltage range of 3.7 to 13 V.


A more interesting and functional device is the JUWEI JW-D2LCDS-35W. It adds convenient adjustment using two potentiometers (coarse and fine), a wide range of connection options, and a display showing the input current and voltage as well as the voltage on the USB port's data lines. It also measures capacity in Ah. On top of that, its power rating is a respectable 35 W over a range of 3 to 21 V.
Essentially, it's a hybrid of an electronic load and a USB tester. You could even put it another way: the manufacturer took an electronic load and bolted a USB tester onto it, so this is effectively a two-in-one device.


Rui Deng is a well-known name in this market. The company makes loads, testers, and voltage converters, and its products have consistently good quality.
Its simplest models are the LD25 and LD35. They offer several connection options, a basic LED display, and a potentiometer for setting the current. The display shows the measured current and voltage, as well as the calculated power consumption.


But among Rui Deng's products, there are a couple of more capable models: the HD25 and HD35. They're very similar to the previous models, but also support QC2.0 at 5 V, 9 V, 12 V, and 20 V, QC3.0, FCP, and AFC 9 V protocols, and don't cost much more.


The models differ in maximum current (4 and 5 A), power (25 and 35 W, respectively), and support for fast-charging protocol control. At the same external dimensions, the 35 W versions can dissipate more power because they have a more powerful fan installed.
The price difference between the devices isn't very large, and the HD35 looks like the better choice.


Not long ago, a similar load appeared from another manufacturer. It works on the same principle as the HD25 and HD35.


An even more interesting option is the DTU-CCL01 USB load. It also comes with several connector options, has a built-in protocol trigger, and can handle up to 35 W at up to 30 V and 3 A, but its screen is much more informative.


An aluminum plate is fitted underneath. It doesn't help with cooling, but is intended to protect the board's electronic components from damage.


It supports many fast-charging protocols, and is quite functional overall: it can measure cable resistance, has overload protection, and supports software calibration of current measurement. However, current is set just like on simpler models, using two resistors (coarse/fine).


Sometimes Chinese developers get a little carried away when designing devices, and the result is an all-in-one test bench. The Juwei Atorch Q7-T is one example.
This model has similar specs to the ones shown above: 30 W at up to 2.8 A and 24 V, several connection options, and current adjustment using a pair of knobs.


The device is a hybrid, essentially made up of several modules. One of them is similar to the UM24C USB tester. You can tell from the menu with its many settings and the high accuracy of current and voltage measurements. It can detect various fast-charging protocols, but can't control them.


But this device also has its own special feature: unlike the previous models, one of its modules is a receiver for working with wireless chargers.


And that's not all. Since measurements are handled by a module similar to the UM24C tester, and the device also has Bluetooth, you can install the corresponding software and monitor measurements on a computer or smartphone. At that point, it's hard to call this device a load anymore.

It's an interesting device, with decent measurement accuracy and plenty of features, but unfortunately it can't control fast charging.


However, this load apparently isn't being made anymore, and has been replaced by a new model, the UD18L, which also supports protocol control and smartphone connectivity.


Other new models have appeared too, rated at 65 W but in a very compact size: link.


But this load does have one drawback: although it's rated for PD 60W, it can't switch protocols, so the manufacturer recommends using a trigger.


And here, it's rated for a whopping 100 W, although honestly, I have serious doubts that it can handle that for long.
But what's more interesting about this load are its features. It was originally sold bundled with the CT3 and CT-3A testers, and the package includes a strange little ribbon cable.


The load itself is also more sophisticated than the previous ones, and includes a microcontroller.


The trick is that it connects to a USB tester, forming a single device.


This USB load looks like the previous ones, but is actually very different in terms of functionality. It's the EBD-USB+ from the well-known manufacturer ZKEtech. Unfortunately, it's no longer made, but you might find one on the secondhand market.

As for the specs, it's still 35 W, 4 A, and 0.4–21 V. But an attentive reader will first notice that the voltage range starts as low as 0.4 V. This load has a separate power supply (via a MicroUSB connector), so it can measure low voltages and can also be used to test battery capacity.


Even more attentive readers will notice that the EBD-USB+ has no current adjustment knobs, no buttons for controlling its modes, and not even a screen. The reason is simple: all control is handled from a computer using specialized software. The software is universal for almost all devices (the EBC-X series is the exception), and this is its main selling point, since it provides a much wider range of features.
As with other ZKEtech models, you can set cutoff thresholds for battery testing. There’s an automatic test for checking power supplies, calibration, and, of course, the ability to plot graphs and save them as CSV files.


The software also lets you control fast-charging protocols directly.


Unfortunately, the choice of connectors is limited to USB-A, but if needed, you can buy a small adapter board to get both microUSB and the newer USB Type-C.


The loads shown earlier differ in features, design, and whether they have a display and adjustment controls, but they all have one thing in common: their power is limited to around 30–35 W. For those who need more, much more powerful USB electronic loads are also available, although in this case that feature is more of an extra.

For example, here are a couple of relatively inexpensive Atorch models. They differ only in heatsink size and, accordingly, maximum power: 150 and 180 W. Here’s a link to the 150 W model.


Both loads have a large screen that displays measured parameters, service information, and calculated values (power and capacity).
For testing USB power supplies and power banks, there are three types of connectors: MicroUSB, MiniUSB, and USB Type-C. There’s no built-in protocol trigger, but there is a USB-A port for connecting an external trigger. There are also separate terminals for connecting to high-power sources.
The controls are conventional: two potentiometers (coarse/fine) and one button.


Of course, the load shown here is long outdated, so if you’re on a tight budget, it’s better to buy the newer version. It’s outdated too by now, but at least it has four-wire connections, more advanced software, and so on.
And, of course, it can connect to a PC and plot discharge graphs. Overall, I think it’s hard to beat for the money.


Another sign that this is a more serious model is its four operating modes (CC, CV, CR, CP), support for an external temperature sensor, and a wide range of protection and auto-shutdown threshold settings.


Or, if you’re really bored and want something... original, Atorch also has this option


If you plan to use the load not only with USB devices and low-power sources (up to 150 W), then the DL24MP or DL24EW would be a good fit. I have a review of the latter. These loads distribute the dissipated power across several transistors and have current balancing. You can also connect additional modules to either one.



There’s really no way to say definitively that one USB load is good and another is bad. It all depends on what you need it for and how much you’re willing to spend.
For example, even the simplest resistor-based load, used with a USB tester, can test chargers or power banks with a 5 V output. You can even use several at once by connecting them in parallel.
Devices with a built-in indicator, smooth adjustment, and various service features are more convenient—for example, products from Rui Deng or the DTU-CCL01. But with Power Delivery chargers becoming more common, they may also require an additional protocol trigger.
The ZKEtech EBD-USB+ is in a class of its own. Despite its relatively modest specifications, it has very advanced software that also supports controlling several loads at once, allowing you to build a multichannel test bench.
And if USB support is more of an extra feature for you, it’s better to look at the 150/180 W models, which can also be used as full-fledged electronic loads.
This page was found when searching for:
нужна схема нагрузки juwei jw-d2 (jw-d2lcds-35w), схема JUWEI JW-D2 (JW-D2LCDS-35W), 19, нагрузка usb кабеля, usb 3 2 максимальная мощность при напряжении 3,7 в, можно ли подключать мошьные потребители к usb разьему компьютера, нагрузочный резистор usb что это, обзор электронной usb нагрузки 15-25 ватт, нагрузка на usb разьемы, usb нагрузка 100w, нагрузка на гыи, usb нагрузка обзор, нагрузка usb, 3, 1, как пользоваться нагрузкой для usb тестера, https://www.kirich.blog/stati/informaciya-dlya-nachinayuschih/1199-kak-vybrat-usb-nagruzku

Questions and answers

What power rating should I choose for a household USB load?

The author says 10–35 W is enough for most household uses. For testing USB power supplies, 100 W is recommended; for room to grow, consider models rated at 150–180 W or more.

What should I check when choosing a USB load?

In addition to current, voltage and power, check the connectors and support for fast-charge protocols such as Quick Charge and Power Delivery. A USB tester or trigger can be used if the load does not support the required protocol.

How does a resistive USB load differ from an electronic load?

A resistive load is simple and inexpensive, but it does not stabilize current, is generally limited to voltages up to 5 V, and lacks service features. Electronic models can provide smooth current adjustment and additional functions.

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments2

Comments are published in their original language.

  1. 22 August 2023 20:06#1
    Miniware выпустила новую нагрузку "карманного" формфактора MDP-L1060:
    ​https://www.miniware.com.cn/product/mdp-l1060-dc-electronic-load/​​​
    https://aliexpress.com/item/4000010134073.html
    100 ватт, 60В/10А, встроенный аккумулятор для автономной работы. Просите на обзор ;)
    +1
    1. 22 August 2023 21:41#2
      Прикольная штучка. Вообще у них классные приборчики для гиков получаются, да и работают обычно хорошо. Но вот для обзора, спросить конечно спрошу, но заранее знаю ответы, либо сразу скажут нет, либо предложат за обзор купон на пару долларов скидки.
      Почти уверен что кто нибудь запилит обзор на муське, мой блог китайским магазинам  неинтересен.
      0

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister