/       /       /    Another set of VTC6 batteries, this time with tabs
Support the project on Patreon


Another set of VTC6 batteries, this time with tabs

$3.72 - 35.04
Go to store
Following up on the discussion about counterfeit VTC6 batteries from AliExpress, I decided to show you another set from the same mold, but from a different seller.
A look-over, a few tests, and some conclusions.


As usual, I bought a small batch from the seller, some of which I got to test.
The seller offers packs of 1, 2, 3, 4, 5, 6, and 10.

They arrived via Mist Express in a small envelope. The batteries were individually wrapped and packed together in a soft bag for protection, and nothing was damaged in transit.


I received the six-piece lot I ordered, so no complaints there.


Neat, and they look like the real thing.


1. If the marking (ZB74) is to be believed, they were made on February 74, 2017—a very strange date...
2. There’s a sticker that looks like the one used by Liitokala, but with different text.
3. The contacts are protected with heat-shrink tubing and cardboard. They’ve thought of everything.
4. The tabs are spot-welded at 6–8 points, but they seem weakly attached to me.


1, 2. The length and diameter are slightly over 65 and 18 mm, but not by much. The length is perfectly fine once you account for the tabs and a piece of electrical tape.
3, 4. The weight variation is small; the photo shows the lightest and heaviest of the six.


The key feature of these batteries is the nickel-strip tabs welded onto them. I’m often asked how to connect batteries when rebuilding cordless drill packs. Soldering is difficult and unsafe, holders are rather unreliable, and not everyone has a spot welder. The solution is to buy batteries with tabs already welded on.


I have no complaints about the width—6 mm is plenty—but 0.09 mm is a bit too thin. The tabs are too soft and flimsy.


Having learned the hard way with the previous VTC6 batteries, I first measure their internal resistance. Unfortunately, my suspicions were confirmed: it’s a whopping 30 mΩ, compared with the normal 8–18. Even the previous ones measured 22–23.


Let’s put them to the test. During precharge, the batteries took about 2 Ah; during discharge, they delivered about 3200 mAh. Interestingly, in my review of the genuine VTC6, the battery in the second slot also delivered 3189 mAh, just like this one. I could try to get the same result on purpose and never manage it, but here it happened by chance :)
So far, the capacity seems fine.


But let’s use a proper holder and connect them to an electronic load to continue the tests more accurately.


As always, I test at three key cutoff voltages: 3.0, 2.8, and 2.5 V. Here are the results:
Battery No. 2 at 0.2C
To 3.0 V — 2907 mAh or 10.73 Wh
To 2.8 V — 3007 mAh or 11.02 Wh
To 2.5 V — 3075 mAh or 11.20 Wh

The capacity checks out. As you can see, most of it is delivered down to 2.8 V; discharging further doesn’t make much sense, since the gain is very small.


Battery No. 1 at 1C
To 3.0 V — 2767 mAh or 9.919 Wh
To 2.8 V — 2922 mAh or 10.37 Wh
To 2.5 V — 3016 mAh or 10.62 Wh



Since these batteries have higher-than-normal internal resistance, I limited the maximum discharge current to 10 A. Here are the results:
Battery No. 2 at 10 A
To 3.0 V — 2456 mAh or 8.246 Wh
To 2.8 V — 2780 mAh or 9.37 Wh
To 2.5 V — 3019 mAh or 10.01 Wh

Battery No. 3 at 10 A
To 3.0 V — 2366 mAh or 7.883 Wh
To 2.8 V — 2721 mAh or 8.92 Wh
To 2.5 V — 2988 mAh or 9.64 Wh

The capacity in mAh barely changed, but the capacity in Wh dropped noticeably.


And now for the temperature rise.
1. At the end of a 1C discharge
2. Discharging at 10 A down to 3 V
3. Discharging at 10 A at 2.5 V.

The excessive heating is a result of the high internal resistance. Unfortunately, 10 A is the maximum current for batteries like these.


So, what do we have in the end? The batteries have identical specs, which is more typical of genuine cells, but they definitely don't match the VTC6 specs. And as for “February 74,” that's an EpicFail, in my opinion.
It's quite possible these are rewrapped cells from something decent, but perhaps past its expiration date and with lower specs. Only the seller knows what's actually inside.
In this case, the capacity matches what was advertised, so I didn't open a dispute. But I'll mention it in my review, and the seller will get a low rating from me.

That's all from me. I hope you found the review useful.
$3.72 - 35.04
Go to store
This page was found when searching for:
VTC6 (US18650VTC6) - 3000mAh, ft uc18650utc c6, https://www.kirich.blog/obzory/akkumulyatory/684-esche-odni-akkumulyatory-vtc6-na-etot-raz-s-lepestkami, ftvc18650vtc6 c6, vt c6 аккумулятор, даташит varicore ft uc18650vtc6, акб se us18650vtc6 c6, liitokala vtc6-n отзывы, kedanone vtc6 18650, tur 18650 vtc6-p, ft vc18650vtc4 c4 e 12c2019d40a, ft vc18650vtc6 c6 litarfl, vtc6, ft vc18650vtc6 c6, зачем лепестки в новых аккумуляторах 18650, vtc 6 18650, vtc6 vari core аккумулятор отзывы, us18650vtc6 turmera отзыв, tur18650vtc6 3000mah 0b4t, turmera 35 18650 vtc 6 12v, батарея vtc6 применение, полярность у varicore vtc6, varicore vtc6 3,7 v 3000 mah 18650 литий ионная аккумуляторная батарея vc18650vtc6 батареи diy никелевые листы обзор, vct c6, lg vtc6 характеристики, аккумуляторы 18650 VTC6, аккумуляторы VTC6, тесты аккумуляторов, аккумуляторы с лепестками, технические обзоры аккумуляторов

Questions and answers

What capacity did the VTC6 cells with tabs deliver?

At 0.2C, cell No. 2 delivered 2,907 mAh down to 3.0 V and 3,007 mAh down to 2.8 V. Discharged to 2.5 V, it delivered 3,075 mAh.

What is the internal resistance of these VTC6 cells?

The measured resistance was 30 mOhm, compared with the author's stated normal range of 8–18 mOhm. The high resistance causes the cells to heat up and deliver less energy at high current.

Are these tabbed cells suitable for a drill battery?

The welded tabs make the cells easier to connect, but the author found them thin and soft, at 0.09 mm thick. The discharge current was limited to 10 A, and the author concluded that the cells do not meet VTC6 specifications.


This model is included in the summary table: Battery comparison: measured capacity and resistance

The figures from this review are in the measurement database: Batteries

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister