Reolink RLC-410WS 4 MP, 5 GHz WiFi and built-in memory card
$76.99
As usual, this review covers the camera's exterior, a teardown, and a brief comparison with the manufacturer's camera with similar claimed specifications.
While preparing this review, I found that this camera has a lot in common with the previous model, so here's a link to its review in case I forget to mention something here.
Specifications:
Hardware
Image Sensor - 1/3" CMOS Sensor
Resolution - Mainstream: 2560 x 1440 (4.0 Megapixels), 2048x1536, 2304x1296, 1080p, 720p; Substream: 640x360
Lens - f=4.0mm Fixed, F=2.0, with IR-Cut
Field of view - Horizontal: 80° Vertical: 42°
Minimum illumination - 0 Lux (with IR Illuminator)
Illumination range - up to 30 m
Noise reduction system - 3D DNR
Power - 12 V, <8 W
Connectors - 10M/100Mbps RJ45
Wireless Standard - IEEE 802.11a/b/g/n
Operating Frequency - 2.4GHz / 5GHz
Built-in microphone
Built-in 16 GB memory card
Software
Protocols & Standards HTTPS, SSL, TCP/IP, UDP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, DDNS, FTP, ONVIF, P2P
Image Compression H.264
Maximal Frame Rate PAL: 25fps, NTSC: 30fps
Code rate 1024Kbps ~ 8192Kbps
Audio - AAC
Maximal User Access 20 Users
Browser Supported IE, Edge, Chrome, Firefox, Safari
OS Supported PC: Windows; Mac OS; Smart Phone: iOS, Android
Record Mode Motion Record/Schedule Record (default: Motion Record)
Wireless Security WPA-PSK/WPA2-PSK
Additional specifications
Operating Temperature: -10℃~+55℃, IP66
Dimensions 65х188mm
Weight 450g
Basically, if you go back to the previous review and check the specifications, you'll see that the difference is that the first camera could pan and tilt and ran on 5 volts, while the one reviewed here has a fixed mount and runs on 12 volts. Actually, this camera also doesn't have a speaker :)
The camera comes in a fairly large box, and judging by the two stickers, it had already been opened for inspection.
The sticker lists the main specifications. There's quite a bit of empty space inside the box; I think the manufacturer could have made it somewhat smaller.

At first glance, the package contents are quite extensive. It includes:
1. RLC-410WS camera
2. Power supply
3. Ethernet patch cable
4. Power cable extension
5. Two antennas
6. Mounting hardware
7. Hex key
8. Manual and brochure covering various camera models
9. Video surveillance in progress sticker
10. Sticker for marking the mounting points.

According to the manufacturer's website, the package should also include a CD with software, but mine didn't. These days, though, it's easier to download it from the internet than to find a CD drive.

1. Manual and other paperwork.
2. The manual explains everything you need to know to get the camera working. I had no trouble connecting it without the manual.
3. Cables. No complaints about the patch cable, but the power extension is only about 6 m long, even though the description claims 18 m. I suspect those 18 m are a conversion of 18 feet.
4. The mounting hardware is nothing special; you can throw it away right away. The antennas and the key, on the other hand, will definitely come in handy.
5, 6. A 12 V, 1 A power supply. That's more than enough given the claimed maximum power consumption of 8 W. It worked perfectly, and the case stayed barely warm even with the IR illuminator on.

The camera has a metal (aluminum) housing.

The camera housing is slightly larger than the Hikvision cameras I'm used to.

Dimension drawing

The IR illuminator is a standard array of 5 mm infrared LEDs. The lens is set apart in its own section to prevent glare, and it's not quite centered. The only plastic part of the camera's finish is probably the black insert on the sunshield.

The mounting arm's locking mechanism is noticeably different from the one on Hikvision cameras. In this case, I can't say which is better; overall, they're about the same, with just a slightly different design. With Hikvision cameras, it’s a ribbed ball with a clamping mechanism; here, there’s a plug with an insert that’s tightened with a wrench. I’d say Hikvision’s solution is probably better after all, since you don’t need a wrench, although the camera reviewed here has a better grip.

The bracket’s adjustment range.
It all looks good in the picture, but I can tell you that tightening the screw to lock the up/down position with the antennas installed isn’t very convenient, and it’s impossible to install them after locking it in place.

The underside of the mounting foot has a soft foam-rubber insert.

The antenna connectors are on the back of the housing. I’m generally skeptical about Wi-Fi in cameras—not just because of security and reliability concerns, but also because it can compromise the housing’s water resistance. In any case, cameras like this are best installed under an eave, and better yet, choose a camera without Wi-Fi if your use case allows it.

There’s a sticker on the bottom of the camera with very brief information and a QR code for connecting to the software. The code isn’t needed on Windows; the connection is automatic. For obvious reasons, I blurred the QR code. It was to the left of the text sticker.
There’s also a small hole on the bottom, with a microphone behind it.

The connection cable ends in three “tails”:
1. Ethernet connector
2. Power connector
3. Reset button. There’s also a mini guide on the reset-button cable explaining how to fully reset the camera.
I was a little confused by the connector for connecting to the local network. Judging by its design, it’s meant to be installed with a cable gland, but one wasn’t included. At first I thought it had been lost in transit, but the picture above from the manufacturer’s website shows the package contents, and it’s not listed there either. A very strange decision: provide the right connector but not the mating part....

I’ll jump ahead a little here and explain how Wi-Fi works on this camera.
Both bands do work, and generally work quite well even in a three-room apartment, but there are a few caveats.
The manufacturer’s website has a nice graphic claiming a range of 250 feet (about 80 m), but that’s with a clear line of sight. I don’t know of any apartments or houses where you could position the camera so it would reliably have that kind of coverage. In reality, there are always obstacles. But that’s a minor issue. The camera will connect and work, but the speed may not be great, especially if you set the maximum bitrate of 8 Mbps. So I recommend using Wi-Fi only in two cases:
1. When there’s simply no other option
2. When the access point is relatively close.
In all other cases, a cable will be more reliable.

Disassembly
Let’s take a look inside. To do that, remove the three screws at the back and take off the front section with the glass.

A "for the record" photo with the camera almost completely disassembled.

Software.
On the first launch, the software initially warned me that the username or password was incorrect. In fact, I'd simply forgotten that I'd tried connecting from Android earlier and set a password in the process. The developers intended the connection process in the Windows software to be fully automatic, since the password is also blank by default there.

In other words, connect the camera to your local network, launch the manufacturer's software on your computer, and that's it—you can see the video feed. It's still best to set your own password afterward, but for ease of getting started, I'd give it a 5: it's very simple and straightforward.

Since I'm describing the settings, just a couple of words about the BLC and DRC functions.
By default, both are disabled, and the image looks like this screenshot.

If you enable backlight compensation, the image contrast will drop somewhat, but you'll be able to see details that were darkened by the automatic brightness adjustment. This function is very useful when there are very bright areas in the image. It has an adjustment range of 1 to 256, though in practice that range isn't necessary; half as much would be more than enough.

Dynamic range control. In my opinion, it helps a little and works more "gently" than BLC, although in some situations the image looks the same as with the function disabled.

Before moving on to testing, I'll digress for a moment. The camera records two streams to the memory card simultaneously, which reduces network load when viewing remotely. If the connection is poor, you can switch to the sub stream, although the video quality will of course be noticeably worse.

Video/audio stream information
1, 2, 3. — Main stream: day, day, night.
4, 5, 6. — Sub stream: day, day, night.

Tests.
A few video clips. The camera's audio actually works great, but because of the automatic gain control, wind noise reduces its sensitivity. The camera itself can pick up sounds from quite a distance. Also, as it happened, there was a refrigerator about a meter from the camera, and it was humming quite loudly, so if you hear a hum in the video, that's not the camera :)
After all the testing, I thought the sound could be improved a little by putting a U-shaped cover around the microphone to create something like a directional microphone.
Daytime.
Evening; the quality is noticeably worse.
Switching to operation in almost complete darkness. To be honest, I expected worse.
Conclusions.
Looking at the camera on its own, without comparing it to others, it's generally a decent camera. It works reliably and has a microphone, built-in memory card, and apps for Android and Windows (tested) and Mac OS (not tested). What disappoints me is the small capacity of the included memory card and how difficult it is to replace. In my opinion, a 64 GB card would be ideal; otherwise, you have to reduce the bitrate significantly. I also had a concern about the computer software: it can record video from the camera, but can't play it back, so you can only view recordings from the memory card, which has limited capacity.
Its major advantages are how easy it is to connect and set up—almost everything is automatic. There are also no problems accessing it remotely from a smartphone over the internet.
But if we compare this camera with another one, for example the Hikvision DS-2CD2042WD-I, which is in the same price range ($70 for the camera under review and $76–77 for the Hikvision), has the same sensor size, lens focal length, and similar resolution (2560 x 1440 versus 2688 x 1520 for the Hikvision), the conclusions are somewhat different.
The Hikvision has better overall image quality, but if you look at the resolution test photos above, the Hikvision unexpectedly performed worse, despite having a higher-resolution sensor and a bitrate set to 16 Mbps versus 8 Mbps on the camera under review. The difference is less noticeable with a static image, though.
Also, at maximum resolution, the Hikvision only outputs 20 fps, while the camera under review does 25/30.
Comparing these two cameras, the Reolink RLC-410WS has the advantage of a microphone, built-in WiFi and memory card, convenient software, and decent image sharpness.
The Hikvision's advantages are PoE, the widespread availability of this manufacturer's products, a more vivid image and more accurate color reproduction, support for a maximum bitrate of 16 Mbps, and a more established brand with technical support.
Overall, I'd put this camera in the “home use” category: it's for someone who wants to get it installed quickly, get a decent image, and have convenient smartphone access, including remote viewing and listening, without needing any technical expertise.
As far as I know, there will be a sale over the next two days, and the camera will be available for $70. The seller has a 3/80 coupon, which may come in handy. The camera's regular price when I ordered it was about $77, the same as the DS-2CD2042WD-I.
That's all from me. As always, I'll be happy to answer any questions.
$76.99
This page was found when searching for:
камера реолинк какую карту памяти можно испльзовать, 1, как подключить ip камеру reolink rlc-410ws, rlc-410s, как выглядит новая версия реолинк, настройка камеры реолинк rlc-410ws, reolink rlc-410-5mp подключение к охранной сигнализации, reolink, https://www.kirich.blog/obzory/kamery/586-reolink-rlc-410ws-4-mp-5-ggc-wifi-i-vstroennaya-karta-pamyati, ralink rlc 410w прошивка, видеокамера reolink, rlc 410w купить, reolink onvif нет звука, rlc-410-5mp, плата reolink 410w, rlc 410w прошивка обновить, какую sd карту поставить в realink rlc 410, reоlink rlc 410, уличная камера реолинк 410 подключение настройка, нет звука reolink rlc 410w, камера 410w реолинк на сколько флэшку ставить, reolink rlc 411ws карта памяти, центральная плата reolink rlc 410w, видеокамера реолинк карта памяти на 64 гб, чем отличается rlc 410w от rlc 410w 4mp, камера видеонаблюдения, камеры 4 МП, обзор камер видеонаблюдения, камера Reolink, камеры видео наблюдения
камера реолинк какую карту памяти можно испльзовать, 1, как подключить ip камеру reolink rlc-410ws, rlc-410s, как выглядит новая версия реолинк, настройка камеры реолинк rlc-410ws, reolink rlc-410-5mp подключение к охранной сигнализации, reolink, https://www.kirich.blog/obzory/kamery/586-reolink-rlc-410ws-4-mp-5-ggc-wifi-i-vstroennaya-karta-pamyati, ralink rlc 410w прошивка, видеокамера reolink, rlc 410w купить, reolink onvif нет звука, rlc-410-5mp, плата reolink 410w, rlc 410w прошивка обновить, какую sd карту поставить в realink rlc 410, reоlink rlc 410, уличная камера реолинк 410 подключение настройка, нет звука reolink rlc 410w, камера 410w реолинк на сколько флэшку ставить, reolink rlc 411ws карта памяти, центральная плата reolink rlc 410w, видеокамера реолинк карта памяти на 64 гб, чем отличается rlc 410w от rlc 410w 4mp, камера видеонаблюдения, камеры 4 МП, обзор камер видеонаблюдения, камера Reolink, камеры видео наблюдения
Questions and answers
What resolution does the Reolink RLC-410WS support?
Its main stream supports up to 2560 × 1440, or 4 megapixels; the maximum frame rate is 25/30 fps for PAL/NTSC.
Does the Reolink RLC-410WS support 5 GHz Wi-Fi and memory-card recording?
Yes. It works on both 2.4 GHz and 5 GHz Wi-Fi and has a built-in 16 GB memory card.
How did the author compare the Reolink RLC-410WS with Hikvision?
The Reolink's advantages include a microphone, Wi-Fi, built-in storage, convenient software, and decent sharpness. The Hikvision produced a better overall image, supports PoE, and offers a maximum 16 Mbps stream versus 8 Mbps on the Reolink.
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments4
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister






















































Comments are published in their original language.