/       /       /    DL24EW: Preview of the updated version of Atorch’s popular electronic load
Support the project on Patreon


DL24EW: Preview of the updated version of Atorch’s popular electronic load

$53.87
Go to store
I've already reviewed two electronic loads made by Atorch. I can't say everything was great, but I can't say they were bad either. That said, I should point out that each new version of their products gets better. While I wait for mine to arrive for review, I decided to put together a short preview.

A reminder: to keep up with new posts on the blog, I recommend following me on Instagram. I'll post notifications about every new article there, and maybe write about something interesting too - link to my account

You can also subscribe to updates and new articles on the Telegram channel - https://t.me/KirichBlog

There are three reasons I decided to write this preview:
1. As I mentioned, one of these is already on its way to me
2. The device itself looks promising
3. There's a small discount for a couple of days.

Originally, I wanted to review a different load, which I'll tell you about toward the end. But the seller offered a good discount on this model, arguing that it's newer, better, and... well, I couldn't resist :)


There are two package options. The second one includes a charging module. I'll get ahead of myself and say that buying it separately is considerably more expensive.


That's everything included in the package. The extra module for the second package option is at the bottom right; otherwise, nothing new.


Like all the loads released after my first and second reviews, this one also has a four-wire connection to the source.


I haven't compared its dimensions with the DL24, but subjectively, they're not very different. Essentially, it's a hybrid of the DL24 and DL24M.


I haven't looked closely at the operating modes yet. I see four main ones—CC, CV, CP, and CR—plus some extras. Some of those were already available on the DL24M, but they've added discharge graph plotting. There's also a CDC mode, which requires the additional module.


The load has a modular design. Unlike the DL24, it uses an encoder for control, as on the DL24M, but here it's mounted directly on the main board. By the way, an encoder is more convenient because it's much easier to move to the front panel than four buttons, not to mention that it's easier to use.


After my DL24M review, the power stage design was substantially changed. In fact, the developers implemented what I did for that review: multiple transistors with load balancing.
But what I didn't expect was that they used four small heatsinks instead of one large one. The only technical explanation I can think of is that this makes it easier to ensure all the transistors sit evenly against the heatsinks.
What's more, the seller offers a kit without a fan and with an external control module. That's the DL24MP version, the one I originally wanted.

The price of this version also seems attractive to me: just $29.


The load has a modular design. With additional power modules, you can increase the power from 150 to 600 W in 150 W increments. Each module costs $14.
The settings screen in the screenshot even shows values up to 3000 W, although nowhere does it say whether you can install more than three additional modules.


It has a set of protection features and fan control, though most likely, as before, the fan can only be switched on or off. I really wish it had smooth speed control...


It's rated to work with low load currents. That's interesting—maybe they've implemented selectable shunt ranges, though I doubt it. More likely, they've used a switchable op-amp.


A few words about the additional module and why it might be worth buying. Well, in principle, after the review I think I could build one myself, but with this price difference, is it worth the hassle?
It looks like the manufacturer has implemented not only a discharge mode but also a charging mode, using an external charger. Some ZKEtech battery testers have a similar mode, although personally, I like being able to control the charging modes too. In any case, even this option immediately elevates the device from a simple load to a battery tester.


And here's what sets this version of the load apart from the previous one: it not only comes with software for remote control, but also connects via Wi-Fi rather than Bluetooth and is said to support Tuya. I'm not yet sure how convenient that will be.


The app seems to support working with several devices at once, which is interesting. But PC control is even more interesting. You can connect via USB, and the software has clearly been reworked since my last review. It now looks much more sensible than it did a couple of years ago.


As promised at the beginning, a couple of words about the other versions.
First, the DL24MP, the load I originally wanted to buy. It doesn't support Tuya or Wi-Fi, but in my opinion it's much more convenient to install in an enclosure, since, like the DL24M, it has a remote control module.


The DL24MP can also be connected to additional power modules. They form a square rather than a cross, as with the DL24M or DL24EW.
Yes, you can clearly see the load sharing here. Now each transistor handles 37.5 W instead of 150 W, which is plenty of headroom, since in practice it's best not to use transistors like these above 50–70 W.



Second, the DL24W, which looks much simpler thanks to its monochrome display, which already seems like something of an anachronism compared with more modern solutions. It's also unclear whether it supports additional power modules: they're not mentioned on the product page, although the design appears to accommodate them, judging by the photos.
The bonus here is the price: just $26 for the basic configuration.


Third, the DLB-600W, a ready-made unit. In my opinion, though, it will be less popular, primarily because it costs $200. But I could be wrong, especially since I wouldn't say building one yourself would be that much cheaper.
It's rated for 600 W, 200 V, 40 A.


That's about all I wanted to tell you today. I really hope this will be useful to someone. As for me, I'm waiting for my kit to arrive :)

And yes, I almost forgot—happy holiday! Today is
$53.87
Go to store
This page was found when searching for:
how update atorch, назначение клемм dl24 180w, musku.ru электронные нагрузки, электронная нагрузка dl24mp, расположение термосопротивления на электронной нагрузки dl24m, корпус atorch, dl24mp 600 настройка, кирич блог dl24ew, dl24mp схема, dl 24 ew назначение контактов на плате схема нагрузки, dl24ew 150, фещкср dl24 сравнение, dl24ew-150w, dl24ew cdc, 1, 3, 4, https://www.kirich.blog/obzory/izmeritelnoe/1155-dl24ew-anons-obnovlennoy-versii-populyarnoy-elektronnoy-nagruzki-ot-atorch, dl24ew, atorch dl24 vs dl24ew, dl24ew 150 вт wi-fi, 2

Questions and answers

How does the Atorch DL24EW differ from the DL24M?

The DL24EW adds Wi-Fi, Tuya support, remote-control software and discharge graphing. Its power stage uses multiple transistors with load balancing.

How can you increase the power of the DL24EW electronic load?

Additional 150 W power modules can raise its capacity from 150 W to 600 W. The announcement says each module costs 14 dollars.

What is the DL24EW's additional charging module for?

It enables CDC mode and, according to the description, supports both discharging and charging batteries when an external charger is connected.

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments9

Comments are published in their original language.

  1. 7 May 2023 16:03#1
    Сориентируйте по срокам обзора. Когда примерно ждать обзор ?
    0
    1. 7 May 2023 18:55#2
      Пока понятия не имею, 3 мая сделал заказ, вчера выслали, так что здесь скорее от почты зависит, а не от меня.
      0
  2. 9 May 2023 20:47#3
    В целом, разглядывая картинки я пришел к тем же выводам что и вы. И вероятно в будущем обзоре вы отметите особенности и отличия от других моделей.  Если позволите, подкину еще несколько заметок для сценария:
    1. Похоже, что в этот раз защитный диод установлен не в измерительной цепи и не ограничивает работу с малыми напряжениями. Он чисто для пережигания предохранителя при переполюсовке. Кстати, очень хорошо что добавили предохранитель.
    2. На плате не распаян чип kt6368a и кварц 24МГц для моста UART - Bluetooth, которые при желании можно сдуть с этого модуля. Оно и понятно, при наличии полноценного BT в Tuya модуле CB3S и множестве нареканий на андроид приложение.
    3. Как и в модели DL24MP отсутствуют два оптрона на выходах АЦП, но в DL24M они есть. При этом я не вижу каких-то обходных цепей. Интересно, как это работает?
    4. Имеется два абсолютно идентичных UART выхода для подключения к ПК. Зачем, не понятно.
    5. Имеется место под разъем для выноса дисплея на панель корпуса. Удобно. Можно не выпаивать дисплей а просто подключить второй. При этом, разъема для выноса энкодера и кнопки нет.

    6. Радиаторы на основной плате вдвое толще чем на дополнительных модулях. Это плохо. Заменить их не проблема, на али большой выбор радиаторов как 40х40, так и 80х80. Но цена... Будет выгоднее распилить пару 80х160. И кстати, я бы развернул рёбра в сторону балансных резисторов.
    7. На клеммах дополнительных модулей есть управляющее напряжение для ОУ, но нет опорного. Видимо в каждом модуле свой опорник. Надо бы проверить, насколько они одинаковые.
    8. О компоновке. Я бы дополнительные модули прицепил не "крестом" и не "квадратом", а "этажеркой", через латунные стойки 60-70мм. Стойки можно поставить хоть со всех трёх сторон для разгрузки печатных проводников. Модулю зарядки это не помешает, если у него спилить центральный выступ. Такая башня удобнее на столе. А в корпусе, если её завалить набок, легко организовать приток холодного воздуха снизу через воздуховоды и выброс дополнительными вентиляторами на задней стенке.

    9. Недокументированная особенность - к любым клеммам S и D по периметру платы можно подключить внешнюю нагрузку, чтобы добавить "мощи" или проверить её при отсутствии других средств.

    P.S. Я свою нагрузку получу уже на днях.
    0
    1. 11 May 2023 21:13#4
      Спасибо за развернутый комментарий и особенно, за разбивку по пунктам.
      1. По сути ставить диод после предохранителя параллельно питанию можно, но на самом деле бессмысленно, потому как паразитные диоды транзисторов сделают это гораздо проще, тем более если их много параллельно. Но посмотрим что они там наваяли.
      2. Вообще лично на мой взгляд блютуз это некий атавизм, лично мне больше нравится когда либо вайфай (правда здесь свои нюансы) либо просто уарт, но это лично мое мнение.
      3. Вот тут не подскажу, если честно, то уже и не помню как было.
      4. Один запасной :))))  Может что-то задумывалось. А может это не уарт, а вход энкодера/кнопки?
      5. У них часто, одно добавят, второе забудут :), напишу в обзоре, может потом сделают нормально :) Параллельно два дисплея можно конечно, но не знаю, не будет ли перегрузки стабилизатора питания.
      6. Насчет расположение ребер полностью поддерживаю, насчет размера, посмотрим, я вообще в будущем планирую убрать эти радиаторы.
      7. Посмотрю, но по сути идентичность опорного им не нужна, скажу больше, по сути опорное там вообще не нужно, я показывал как реализованы силовые модули у меня.
      8. Этажеркой не получится, вы закроете вентиляторы. Если перед крыльчаткой есть преграда, то эффективность работы заметно снижается.
      9. Надо попробовать  

       
      0
  3. 13 May 2023 19:35#5
    DL24EW: Preview of the updated version of Atorch’s popular electronic loadСобрал башню. Высота 213мм, зазор над вентиляторами 15мм, нижние стойки 60мм, остальные 50мм. С задней стороны полный набор контактов, по бокам только силовые. Из плюсов - компактность и дополнительная продувка транзисторов. Минусов пока не выявлено. Вес всей конструкции 1,4кг.
    0
    1. 13 May 2023 20:57#6
      Да, неплохо получилось, согласен. просто я использую другой конструктив, он у меня показан в обзоре построения электронной нагрузки. Там я как раз и столкнулся с тем, что вентилятору сложнее работать когда перед ним есть препятствие. Кстати, практика показывает, что проблема еще добавляется когда нагрузка стоит на столе, т.е. просто поднятие немного корпуса сразу снижает температуру транзисторов.
      Но у меня корпус очень компактный, а мощность иногда большую отвожу. 
      0
    2. 17 June 2023 13:38#7
      Сегодня наткнулся на интересный лот, силовой модуль за 1 цент, уже заказал, судя по всему для тех, кто уже покупал у них нагрузку, попробуйте, может у вам тоже дадут.
      +1
      1. 18 June 2023 07:12#8
        Спасибо, но видимо это ваша персональная ссылка. Я покупал у Hidance, a они не такие щедрые ))
        0
        1. 18 June 2023 09:56#9
          Жаль. Я готовлю обзор этой нагрузки, надо было ссылки, зашел во все товары, сгруппировал по новизне и эта была первой, перешел, купил, потом из поиска этот лот вообще пропал.
          Попробуйте так посмотреть.

          Думаю что они сделали для тех кто купил у них такой вот подарок, обнаружил совершенно случайно, подумал вдруг кому-то пригодится.
          0

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister