/       /       /    SNDWAY SW-S70 Laser Distance Meter
Support the project on Patreon


SNDWAY SW-S70 Laser Distance Meter

$48.99
Go to store
I've already seen many reviews of this company's measuring instruments, so mine will be more of an addendum and another look at Sndway's products. I haven't come across a review of this particular model, though, and it has a few distinctive features.
As usual, I'll take a look at the device, take it apart, run a few tests, compare it with another instrument, and share my conclusions.


To start with, the device under review is the mid-range model in the SW-Sxx lineup, which includes:
SW-S50
SW-S70
SW-S100

The maximum range is indicated by the number in the model name: 50, 70, or 100 meters. There are no other differences between the models.
However, they do differ from other models in terms of features:
SW-Txx — a basic model with an additional bubble level and a monochrome LCD.
SW-Exx — a slightly improved and expanded version of the SW-Txx model
SW-Pxx — a series of compact measuring instruments
SW-Sxx — models that connect to a computer and also have a built-in digital level.
There are also two separate models, the SW-S80 and SW-S120. Unlike the other SW-Sxx models, they have a built-in camera to make it easier to aim at the object being measured, and can measure tilt along two axes rather than one.






I already have a similar device, though from a different manufacturer. Since their maximum ranges are roughly the same (60 and 70 m), I'll compare them from time to time in this review. The first thing I'll start with has nothing to do with the device itself: the box size. It's quite large.


As usual, the packaging lists the basic specifications and shows what all three models in this series look like.
It's packed quite securely. The rangefinder is placed face down, presumably to provide extra protection for the display.


The package includes:
1. SW-S70 meter
2. Carrying case
3. USB-to-microUSB cable for charging and connecting to a computer.
4. Wrist strap
5. CD with software
6. Manual
7. Reflective plate


1, 2. The manual is in English, but it has illustrations, so I think you can figure things out, at least in general terms.
3. The USB cable and wrist strap are nothing special.
4. The reflective plate is needed for measurements in difficult conditions, for example, on mirror-like, transparent, or poorly reflective surfaces. It also helps in bright sunlight. The plate is 1 mm thick, so the measured distance will differ by that amount.


The belt case for storage and carrying is much like others I've come across. It's convenient enough, the Velcro is strong, and it's easy to use.


There's nothing else interesting in the package, so let's move on to the device. Here, too, I should note that it's noticeably larger than I initially expected.


I'm used to a smaller, simpler meter, which I reviewed some time ago. While using it, I found that it goes through batteries rather enthusiastically, despite having a basic LCD and being noticeably less functional overall. That's partly why I chose a rechargeable model this time.


The design is much like that of most meters of this kind. It reminds me of old mobile phones—not just in appearance, but also in its length and width. The only real difference is the number of buttons :)


The keypad is soft, and the buttons click distinctly when pressed.
Read - power on; press and hold to switch to continuous measurement mode
"+" - increase a value or navigate the menu
Menu/= - open the menu; also used for calculations
"-" - decrease a value or navigate the menu
Cube button - calculate volume
Unit - select units of measurement
Triangle - measure height and area, and perform Pythagorean calculations
Clock button - select the reference point and delayed start
OffClear - power off or clear the readings
Floppy disk button - save measurement results to memory.

As is often the case with Chinese devices, the "+" button is on the left and the "-" button on the right. I personally found this layout awkward to use.



There's a connector on the left for connecting a charger or computer. The charging current is around 400-500 mA, which is a bit high for 800 mAh batteries.
At the bottom is a flip-out tab for measurements in difficult conditions, for example, when the reference point isn't on a flat surface.
There's a hole on the right for attaching the wrist strap.


As usual, the front has an opening for the laser beam, as well as the photodetector lens.


The design allows the device to be mounted on a tripod, using the same thread as camera tripods.


The batteries were already installed, but to keep them from discharging during storage, they were left inside their protective film.
They're marked GP, size AAA, capacity 800 mAh. I couldn't find a production date.


That's it for the external inspection. Now I'll describe the operating modes and settings menu.
1. The manufacturer's splash screen appears when the device is switched on.
2. Just a few seconds later, the device switches to its main operating mode. The display shows the reference point, tilt angle, battery charge, measurement mode, and spaces for adding measurement results: the current reading and the three previous ones.
3. For an experiment, I placed a matchbox under the front of the device. It showed an angle of 8.1 degrees. The tilt angle is displayed in 0.1-degree increments.
4, 5. The display shows the result as these strange "asterisks" I don't understand :)
6. In feet
7, 8. In meters, with resolutions of 0.001 m and 0.01 m, i.e. 1 mm and 1 cm.
9, 10, 11. Results can also be displayed in inches, but they’re shown as fractions, which feels unfamiliar if you’re used to the metric system.
12. The menu lets you set the time before the backlight dims, the laser turns off, and the device shuts down completely; turn the sound on or off; lock the units of measurement; and choose whether to display the tilt angle in degrees or percent.
13. There’s also a calibration option, so if you have accurate length standards, you can improve measurement accuracy.
14. I selected the metric system right away, although there will be screenshots in the "Chinese" system later on. The thing is, you have to press the floppy-disk button to save the settings. I didn’t, so they reverted to their defaults when the power was disconnected.
15. I didn’t enable angle measurement in percent; I’m more used to degrees.





1. Measurement result addition mode.
2. Once, I got a strange glitch: in a single measurement, it came up with 35,156 m. I never did figure out what happened.
3. While I was at it, I measured the area of the room in my apartment. The process is simple and basic, and the result looked pretty close to the real figure, as far as I can remember.
4, 5. Here you can measure height with a single click. Place the device on the surface from which you want to measure, raise the top until the laser points at the spot whose height you want to measure, and press the Read button. The device then displays:
Tilt angle
Straight-line distance to the surface being measured
Distance from the device to the measurement point
Vertical distance from the surface to the measurement point.

Just for the experiment, I measured the height of the wall from countertop level at different distances from the wall. Of course, in this case I could simply have measured the distance from the table to the ceiling, but sometimes you need to measure the height of an arbitrary point on a wall—that’s what this mode is for.
6–10. Things got more complicated for me after that, since I was bad at geometry in school, and that was over 30 years ago. But basically, the device can measure distances between points on a surface using indirect measurements, for example on a wall. Measurements like these are especially useful when you can’t access the surface directly and have to measure "remotely".
A red line to the left of the measurement results marks the measured or calculated result.


1, 2, 3, 4. The device supports four measurement reference points:
From the front
Approximately from the center of the housing
From the back
From the retractable tab.

In the photo, the device was held in place, so you can see the difference in the readings—or, more precisely, the correction applied when measuring from different reference points.
5. Pressing and holding the reference-point button enables the measurement delay mode. It’s set to 5 seconds by default; use the +/- buttons to increase it to 60 seconds.
6. Pressing and holding the Read button starts continuous measurement, recording the maximum and minimum values. The current result is shown in the lower field.
7. Pressing the floppy-disk button saves the measurement results.
8. While I was playing around with the device, its battery ran out. Instead of the usual notification window, though, it displayed Error 3. The battery indicator was flashing at the same time.
9. I connect it to a charger, and a USB connection icon appears as charging begins. The device turns on in this mode, and I never figured out how to turn it off.
10. Once fully charged, the battery indicator turns green. That’s the only indication you get.


After seeing that the device can display error codes, I looked them up online so I’d have an easier time figuring out what it was trying to tell me later.
Error code / Cause / Possible solution

Err1 / Signal too weak / Aim the beam at a target with better reflectivity

Err2 / Signal too strong / Aim the beam at a target with lower reflectivity

Err3 / Battery charge too low / Insert new batteries

Err4 / Operating temperature out of range / Take measurements at a suitable temperature

Err5 / Invalid measurement or error in the Pythagorean calculation / Take the measurement again, or make sure the hypotenuse is longer than the other known side of the triangle

Err6 / Memory error / Contact a service center

Err8 / Tilt measurement error / Contact a service center


1. Honestly, I was worried the display would be washed out in sunlight. That effect is still there, of course, but the image is definitely easier to see than on smartphones and the like.
2. Since I had both devices with me, I also checked how repeatable the measurements were over four consecutive tests.


Knowing the current drawn by the device and the battery capacity, you can roughly estimate its runtime.
1. When switched off, the current is almost zero.
2. Standby
3. Standby, but the screen has switched to dim mode
4. Measuring with the laser on.
5. Measuring with the screen in dim mode.
6. The most demanding mode: continuous measurement. The current varies between 200 and 220 mA.

Based on these figures and the batteries’ stated capacity of 800 mAh, we can estimate that the device will run continuously for at least 4 hours. But since the laser isn’t always on, it’ll probably be closer to 5–6 hours. Then again, if the batteries really have their stated capacity, I’d plan on 3–4 hours instead.


While I was at it, I tried to take the device apart. First, I removed four screws: two in the battery compartment and one hidden under the sticker on the back of the case.


But this device turned out to be a tough nut to crack. I wedged a screwdriver between the two halves of the case from the back, but they wouldn’t come apart.


After some more poking around, I figured out how to separate the two halves of the case.


I managed to remove the front section from one side; it was held in place by clips.


Inside, you can see the display, with the optical assembly underneath it, containing the laser emitter and photodetector.


There are also two circuit boards: the main board and the keypad board, connected by a flexible ribbon cable.


That’s as far as I got with the teardown. The battery compartment contacts are fitted quite tightly, and judging by the design, they were soldered to the board after it was installed in the case. In other words, the board can’t be removed without desoldering. It’s a poorly thought-out design, although there isn’t much to repair in there anyway. Still, I would have liked to take a look. Desoldering the board would be very awkward, and I didn’t want to damage anything since the board appears to be multilayer, so I decided to stop there.


Someone once asked me how a laser distance meter measures distance. People often assume that the device measures how long the laser beam takes to travel there and back. That’s not quite how it works, though. I’ll quote my own explanation from another review.
The second, simpler and cheaper method is to measure the signal’s phase shift.
Here, the laser operates continuously (in a manner of speaking, since the beam is modulated by a high-frequency signal).
Part of the circuit measures the phase shift between the signal sent to the laser and the signal received from the photodetector. If the signals arrive in sync, the phase shift is zero, so the voltage at the detector’s output is also zero. The greater the phase shift between the signals, the higher the voltage at the phase detector’s output.
This voltage goes to the ADC, and the result is then displayed as digits on the screen.
This is all heavily simplified, of course. But if you want, you can build a laser distance meter yourself.
The operating principle of this type of laser distance meter is shown in this block diagram.




And of course, a few tests, some of which involved comparing it with another device I tested a while back.
1. Minimum measurable distance from the front edge of the housing.
Actual — measured
75 mm — 78 mm
80 mm — 82 mm
90 mm — 91 mm
100 mm — 101 mm

Below 75 mm it gives an error; in practice, you can start measuring at 90 mm.

2. Maximum distance I was able to measure inside the apartment.
3, 4. 0.5 and 1.0 meters
5, 6. The room's width and length.

Judging by the repeatability and comparative accuracy tests, everything is fine, but sometimes the device could be off by about ±1 mm. For example, I move it slowly away from an obstacle and it reads 1998, 1999, 1999, 2001, even though I barely moved it. The specs did say ±2 mm, so that's perfectly normal.


I made the test more challenging.
1. I placed the device 2 meters from the wall. I had to use a box as a stand so it wouldn't measure to the baseboard.
2. I switched the device to measure from the rear edge of the housing and raised the beam so it hit the corner where the wall meets the ceiling.
I got a perfectly reasonable room height of 2.58 meters, but it now showed the distance from the wall as 2.089 meters instead of 2 meters.
3. I thought I must be doing something wrong, so I switched to measuring from the front edge of the housing. I got a normal distance from the wall (within the margin of error) of 2.006 m, but now the ceiling had "dropped" to 2.487 m.
4. I decided to move both devices over to the wall and measure the height directly rather than indirectly. I got 2.575 m, which roughly matches the result from test 2.

So for now, I'm more confused about how to measure correctly. The difference between measuring the height directly and indirectly may be because the indirect measurement uses the gyroscope data, and the gyroscope isn't very accurate. Also, as it turns out, it's not that easy to aim precisely at the ceiling/wall corner :)


Of course, you might ask why bother measuring in such a complicated way when it's easier to do what I did in the last example and measure from floor to ceiling. That's true, it's easier, but sometimes you can't measure any other way—for example, if you want to find out how high your neighbor's window is over the fence :)


And one last test, outdoors.
1, 2. Estimating the distance to the wall of a house in sunny weather. Everything works fine here; based on my calculations, the result is quite reasonable. And considering that I wasn't measuring perpendicular to the surface, it's actually very good. The readings fluctuated because I was holding the device almost at arm's length.
3, 4. But I couldn't measure the distance to another house a little farther away, even though I tried aiming at the spaces between the windows. In the end, the device gave some strange reading once, then kept showing an error, complaining that it couldn't see its beam. Even mounting it on a tripod, which should improve stability, didn't help.


In the evening, after dark, I repeated the experiment and measured the distance to the far corner of the house opposite (the second photo above). I got about 54 meters. Then I moved to another window (the fourth photo) and was able to find the device's maximum measuring range: 70 m. Beyond that, it gives an error.



The package includes a computer program. Interestingly, it's not available on the manufacturer's website, so I had to dig out an old optical drive and connect it to my computer.
It connects without any problems, and I didn't have to install any drivers. The program also comes in two versions: an installable one and a portable one that runs without installation.


The program lets you view measurement results stored in the device's memory. It shows not just the final result, but the entire sequence of measurements used to calculate it. You can also name each row so you don't forget what you measured. There's also a function for taking measurements directly with the device connected to the computer, right from the software.

A few years ago, I remember people cobbling together an entire interface circuit to connect a "Leica" to their device and get data from measuring instruments. I think it would have been much simpler here.


You can export the data to Excel, though you'll see exactly the same information as in the software.


That's about it. We can draw a few conclusions based on the inspection and use.
Overall, I didn't notice any particular shortcomings. The device works and measures, and does so quite accurately even in relatively challenging conditions, although there were a few oddities I couldn't figure out. For example, the displayed figure of 35 km, or some confusion about how indirect height measurement works. But in the last case, it was probably more my fault—geometry clearly isn't my strong suit.
The construction is quite sturdy, and I have no complaints about what’s included either. And battery power, plus a built-in charger with a microUSB connector—that definitely earns it a point.
I was also pleased to see a built-in level, since it makes it possible to take measurements that are noticeably harder to do without this feature.

The downsides are mostly that the manufacturer's website has no software, and online you can either find software for instruments from another company or nothing at all. Of course, a disc is included, but not everyone has a drive to read one these days. And simply putting the files on the website has long been standard practice—but apparently not in this case.
The second downside is the working range in bright light. I couldn't get more than 45 m, but it's hard to judge, since at that distance I could barely see the laser dot itself anyway.

As usual, I asked the seller for a discount in exchange for the review, but he said the price was already reasonable and offered a gift instead—a small bubble level. It probably won't be much use for work, but it would be just right for giving to a child to keep them from distracting Dad while he's taking measurements. To get one, add "00055" in the order comments.

That's all from me. I hope the review was useful, and as usual, I'll be glad to answer questions or read your comments.
$48.99
Go to store
This page was found when searching for:
sndway лазерная рулетка чем отличаются, лазерный дальномер sndway sw-s70 характеристики, sndway sw-ds70, sndway sw ms70 инструкция, 1, https://www.kirich.blog/obzory/izmeritelnoe/633-lazernyy-izmeritel-rasstoyaniya-sndway-sw-s70, рулетка sw-ds70 инструкция на русском, sndway лазерный дальномер как включить звук, загорается err 5 на sw ds50 sndway дальномер, инструкция на русском языке для sndway sw tg70, sw ds70 70m, sndway sw s80 скачать программу для windows, инструкция дальномер sndway 70 м, как откалибровать уровень лазерного дальномера sndway sw s50, как сбросить настройки дальномера sw s50, sndway sw ds инструкция, лазерная рулетка sw ds70 инструкция на русском, sndway не работает лазер err1, sndway sw-s70 инструкция на русском, инструкция к sndway sw s50 на русском языке, характеристики лазерного дальномера лазерный дальномер sndway 70m, sw ds50/ds70 инструкция на русском sndway, sndway разборка, прога для дальномера sndway, sndway обзор моделей, лазерный дальномер SNDWAY, лазерный измеритель расстояния, лазерный дальномер отзывы, дальномер SNDWAY SW-S70

Questions and answers

What accuracy does the SNDWAY SW-S70 distance meter offer?

Its stated accuracy is ±2 mm, and the minimum measurement increment is 1 mm.

How far can the SNDWAY SW-S70 measure in bright sunlight?

The author could not get measurements beyond 45 m in bright light.

What batteries does the SNDWAY SW-S70 use, and how is it charged?

It uses three 800 mAh Ni-MH rechargeable batteries. Charging and computer connection are via microUSB.


This model is included in the summary table: Comparison of measuring instruments reviewed on the blog

The figures from this review are in the measurement database: Measuring instruments

Calculate manuallyAll calculators

Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister