My regular readers know that I work with video surveillance systems. So I simply couldn't pass up a new 4 MP camera, and when I ordered another batch of the familiar DS-2CD2032 cameras, I bought one of these to test as well. But since the DS-2CD2032 is now available in an updated version called the DS-2CD2032F-I, I decided to combine the two and write both reviews in one. So, read on if you're interested in components for proper video surveillance systems.
Part of this review will be written as a comparison, especially since I initially thought the cameras differed only in resolution, but things turned out to be much more complicated. Which makes it all the more interesting.
The previous version of the 3 MP camera is covered in two other reviews. The first is about the camera itself; the second covers one way to use it.
As I wrote some time ago, I don't review cheap Chinese surveillance cameras—not because nobody offers them to me; on the contrary, I've been offered them several times. I just find them uninteresting. Cheap Chinese cameras have their place in simple, inexpensive DIY surveillance systems, where the guiding principle is: keep the cost down. The cameras reviewed here don't fit that description, although there are considerably more expensive cameras that are used even less often. That's why most professional installations use mid-range equipment from Hikvision and ILDVR. Above that are Axis and Pelco, but those are for when money is no object. I'm currently negotiating with ILDVR about providing equipment for a review, but since I'm dealing directly with the manufacturer, the process is taking a while. ILDVR is Hikvision's closest competitor.
But ILDVR is a topic for another review (if that happens). For now, let's take a look at what I bought.
A little background on the order. I bought the cameras from the same seller as before, but this time he left me a little puzzled: the store is now called Uscam, the original camera names have been removed from all the product pages, and even the preview images show the Uscam name. The correct name is still in the link, though. I wrote to the seller: “I bought cameras from you before, but now I see a name I don't recognize. I want Hikvision—what should I do?” The seller replied: “Don't worry, it'll be Hikvision, genuine, all good. The DS-2CD2032 cameras are no longer available, though; you'll get the DS-2CD2032F-I.” Well, I thought, I'll take a chance, even though I've bought more than one or two cameras from him.
I should say, though, that delivery takes a long time—almost every time.
As always, let's start with the packaging. 1. The plain packaging for the 3 MP camera didn't surprise me at all, but the colorful box for the 4 MP camera was a nice touch. These are the boxes cameras come in when sold by authorized dealers. Or rather, used to come in—cameras are already being sold here in boxes without color printing, too. 2. The package included stickers notifying people that video surveillance is in progress. But since they're in English, they're probably more of a nice extra than actually useful. 3–4. The packaging and contents of the cameras are very similar, though there are a few minor differences.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
In all the photos, I'll try to put the 3 MP camera on the left and the 4 MP camera on the right. As here. The manufacturer's stated specifications are roughly the same for both cameras, but there are some significant differences. Here they are.
Specifications for the DS-2CD2042WD-I camera. The 3 MP version has similar specs; I've listed the differences above.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
This is what came in the boxes with each camera. It looks like a lot, but some of it isn't actually needed.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
What both cameras have in common is the mounting hardware and the cable waterproof connector kit.
4MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
You can throw the mounting hardware away right away, but the waterproof connector is very useful.
This is what the whole kit looks like: two rubber seals and a pair of plastic parts (I don't know what they're properly called). The photo shows them in the order they go onto the cable.
4MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
In more detail. 1. The thick rubber seal can't be installed just any way around: one side is smooth, while the other is shaped. Install it with the smooth side facing out. 2. Slide the three parts onto the cable in the order shown in the photo. 3. Crimp the connector. 4. Put the thin rubber seal on the part of the connector facing the camera, then connect the connectors.
4MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Join the camera-side and cable-side halves of the waterproof connector. It connects like a BNC connector: push them together, then twist. Then screw on the tail piece. That's it. The connection is very secure.
4MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
1. The 3MP camera kit is on the left, the 4MP camera kit on the right. 2. Interestingly, the instructions for the 3MP camera don't have the Hikvision name on them. They also included CDs, but I don't even know what's on them, since I've been using the software on my work flash drives for a long time. 3. The 3MP camera kit included a little key. That's probably the biggest difference between the camera kits. 4. The key is double-ended, but both ends are the same size and type: a star-shaped hex bit with a hole.
4MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
First, a description of the 3MP DS-2CD2032F-I camera, which I bought via this link.
The first and most noticeable external difference is that the front part of the housing is now plastic. Previously, the entire camera housing, as well as the mounting hardware, was aluminum. At first I thought it was a knockoff, but no—the official sellers are now selling cameras in exactly the same configuration. The second difference is the big lump on the cable, instead of the small, neat splitter. I figured out why they did this after taking it apart, and I'll explain a little later.
4MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
There are almost no changes on the front, although there are a few differences. I’ll show those in the group photo. The backlight is the same as before. Its control is “intelligent”: it doesn’t just switch on when it gets dark; it also controls the IR filter. You can also disable the backlight in software or switch it to “smart” mode. In this mode, you can configure the camera to turn on the backlight before it gets completely dark, or to leave it off when it’s already nearly dark. Sometimes that’s necessary.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The back lists the basic specifications. The most interesting thing is that the box lists power consumption as 5 W, while the camera itself says 7 W. The cameras are fitted with a lens with a 4 mm focal length.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The 4 MP DS-2CD2042WD-I camera was purchased via this link. So far, everything here is pretty standard: externally, the camera is identical to the previous 3 MP version. The housing is entirely aluminum.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Basically, everything here is as shown on the box. But it’s worth noting that at least this camera (and possibly the previous one) can be ordered with a lens with a 6 mm focal length; the standard 4 mm lens is fitted by default.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The front of the camera differs slightly from the “upgraded” 3 MP version, but the differences are mostly due to the design of the front section—more specifically, its material. The rim around the round section of the housing covers a little more of the front than on the previous version. At the back are a standard screw for connecting the ground wire and a reset button.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
As with all cameras from this manufacturer, the “leg” joint has notches to hold it in place more securely, although personally I prefer a somewhat different design. The camera can rotate around its axis and swivel left/right and up/down. Once you’ve set the desired position, the bracket is secured with a large “nut,” which is also made of aluminum and has notches on the inside.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Here’s a side-by-side comparison of the front sections. The main difference is the black anti-glare hood. On the new 3 MP version, it’s glossy and made of film, while the 4 MP camera (and older 3 MP versions) has a matte plastic insert.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
A comparison of their appearance.
The cameras look very similar. They do differ in length by about 1–2 mm, but I don’t consider that significant. The manufacturer is indicated on both cameras.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
One improvement is that the mounting bracket for the 4 MP camera is larger. I wouldn't say it's a major change, but it does look more substantial. I remember that a long time ago there were cameras with plastic mounting brackets, and they broke all the time. Both versions here use aluminum, and I hope their “cost-cutters” don't decide to switch to plastic.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
As you can see, the cable on the updated 3 MP camera has a bulky cable separator. It's extremely inconvenient, but as I found out later, it does have some advantages. It's quite possible that the new 4 MP camera will have one too.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Here's a noticeable difference between the 3 MP camera and the 4 MP version: the 3 MP model has an extra hatch on the bottom. That's what the special screwdriver included in the box is for.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Under the hatch are a reset button and a slot for a microSD memory card. This difference is reflected in the model name by the letter F — DS-2CD2032F-I The maximum supported capacity is 128 GB. So, in practice, they saved a little on the housing, then used the savings to add a memory card slot. As I understand it, there won't be any more of the previous versions of these cameras; they'll only be available in this configuration: plastic + memory card slot. That's what the seller was trying to tell me when I asked for the old version and he said that only models with a card slot were currently available. The hatch is well designed: there's a rubber seal inside, and the screws are captive, so they don't fall out (extra points for that). Overall, it's a somewhat uneven trade: a metal front section and a sealed reset button in exchange for a slot (the processor is the same) and a regular button, but with a hatch.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Now that we've covered the exterior, it's time to move on to the good stuff: taking it apart. The teardown will also be split into two parts, one for each camera model.
The differences became apparent right at the start of the teardown. It's now a single-sided design, meaning all the electronics are housed in the section that attaches to the bracket. Also, the housing is held together with self-tapping screws rather than machine screws.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Approximate camera disassembly procedure: 1. Remove the four self-tapping screws holding the two halves of the housing together. 2. Remove the front section of the housing (it's a tight fit). 3. Remove the seal around the lens. 4. Remove the two screws, take off the IR illuminator board, then remove the black plastic disk (it's what prevents the top section from coming off). 5. Remove the two screws and take out the camera module. 6. Remove one screw and one long standoff, then take out the DSP board.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
First, the DSP board. For one thing, there’s only one here. Well, the previous version of the camera also had just one DSP board, but there was a second board stacked on top of it, for the network interface and PoE converter. That’s the secret behind the large plastic lump on the cable: it houses the power converter. There used to be 10 wires: 8 from the LAN connector and 2 from the power connector. Now there are only 6: two from the LAN and two from the power connector. This should make the camera a little easier to repair and more reliable (the converter used to heat the camera from the inside; now it’s mounted separately).
You can see the memory card slot on the board, along with the processor, covered by a thermally conductive pad that transfers heat to the camera’s aluminum housing.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
This board also has the secondary voltage converter and an H5TQ2G63FFR RAM chip with a capacity of 2 Gb, or 256 MB.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The network interface is built around the fairly well-known RTL8201F chip.
The processor that handles video processing is marked A5SCORH and was made by Ambarella, a fairly well-known company. The same processor was used in the previous version of the camera.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
There are power converters on the back of the board too. Interestingly, there’s also a connector like the one on the previous versions, where the boards were stacked, but it isn’t used here.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The flash memory chip TC58BVG0S3HTA00 is also on this side, with a capacity of 1 GB (128 MB).
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
There’s nothing noteworthy on the image sensor board. It has only a few cosmetic differences from the previous version; otherwise, it’s identical.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
As I mentioned above, the housing is aluminum and acts as a heat sink for the internal electronics. The cable is potted in some kind of hard compound.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Here the design is the “classic” one, i.e. the camera’s electronics are split into two parts. The image sensor, lens, and illuminator are mounted on the front section; all the other electronics are on the rear section.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The two halves are connected by a ribbon cable and a bundle of four wires.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The teardown is very similar—actually, pretty much identical—to that of the older version of the 3 MP camera. The boards themselves are also very similar.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The camera comes apart in a similar way, though there are some differences. 1. Remove 3 screws, take off the front section, and disconnect the ribbon cable and connector. 2. Remove another 3 screws and take out the camera module. 3. Remove 3 more screws and take off the IR illuminator board. 4. Remove another 3 screws and take the converter board out of the rear housing. The board is also held in place by the connector, so it takes some force to remove. 5. Remove the last 3 screws and take out the DSP board :)
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Yes, this uses the same design as the old version of the 3 MP camera. Power is supplied by a PoE converter built on a separate board. The secondary voltage converters are mounted on it as well.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The back of the board has protection suppressors, bridge rectifiers, and other small components. Nothing interesting, really.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The DSP board has quite a few more components. You can also see a thermal pad and a small battery (the previous camera had one too, of course). Some of the secondary voltage converters are mounted here as well.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
1. The RAM chip is the same as in the 3 MP camera: H5TQ2G63FFR, 2 Gb (256 MB). Interestingly, Samsung chips were used before. Now they use Hynix, or SK Hynix, since the company no longer exists in its former form. 2. And here is the processor. Since the camera has a higher resolution but the same maximum frame rate, I was curious to see what processor was inside. Yes, it really does use a different processor, S2lL-M-A1-RH, though it is still made by Ambarella. This processor (or, more accurately, SoC) is specifically designed for IP surveillance cameras. I could barely find any documentation for it. The link above is to a datasheet, but it's heavily abridged—literally just the table of contents :(
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The back of the board looks a bit simpler somehow. The diagonal placement of the chips is especially amusing—it looks like the designers were literally “cramming” them onto the board :)
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Here again, the same flash memory chip as in the new 3 MP version of the camera is used — TC58BVG0S3HTA00, along with the same network chip, RTL8201F. So, technically, the cameras differ only in the image sensor and the processor that handles the video.
4 MP camera DS-2CD2042WD-I and updated version of my favorite DS-2CD2032F-I in one review
The image sensor board. The camera model is visible on the sticker, but what's interesting is that the board was designed way back in 2014, even though these cameras only appeared on the market relatively recently.
4 MP camera DS-2CD2042WD-I and updated version of my favorite DS-2CD2032F-I in one review
There aren't many components. I didn't try to get to the image sensor, since there was a chance I might knock the focus out of alignment, and refocusing a 4 MP camera is no fun at all. So this is as far as I went :(
4 MP camera DS-2CD2042WD-I and updated version of my favorite DS-2CD2032F-I in one review
You can see that the “optimization” affected both the image sensor module and the IR illuminator. The chassis is clearly simpler, although I didn't notice any difference in operation.
4 MP camera DS-2CD2042WD-I and updated version of my favorite DS-2CD2032F-I in one review
And here's a group photo of the two cameras taken apart.
4 MP camera DS-2CD2042WD-I and updated version of my favorite DS-2CD2032F-I in one review
And of course, testing the cameras. Last time I didn't get around to doing that and just took some photos at home, but this time I want to take a closer look and compare them. But first, a little about the software.
I'm not going to go through the 100,500 menu items and tabs, since most of them are no different from the previous version of the camera, which I covered in this review. I'll just mention a few small differences I noticed. First, I always change the camera's IP address to one that's convenient for me. I use the manufacturer's software for this. The address used to be 192.0.0.64; now the default is 192.168.0.64, although the box listed 192.168.0.128.
4 MP camera DS-2CD2042WD-I and updated version of my favorite DS-2CD2032F-I in one review
But then I got a rather pleasant surprise. At first, I couldn't use the standard password for this manufacturer's equipment — 12345 — so I had to dig out the manual and check. The cameras now come with a blank password, but when you first turn one on, it prompts you to set a new password and won't let you proceed until you do. What's more, it won't accept simple passwords like 12345. It even turned its nose up at qwerty1234, but eventually accepted it and let me into the settings. The nice thing is that you can no longer use the camera with the default or a really simple password; you'll have to come up with something more secure.
The camera has the latest firmware, version 5.3.3, and encoder version 7.0.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
The camera's maximum resolution is 2688x1520 at 20 fps. But the new firmware adds support for a new codec—or rather, a new version of it: H264+. Unfortunately, the camera can encode video in this format, but there's nothing to decode it with yet. The server software doesn't work properly with it so far, though they promise improved quality. When I tried viewing it in a browser, the image appeared for a fraction of a second and then disappeared. We'll have to wait for new software.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
I'll jump ahead a little and demonstrate how the ROI system works. In my previous review, I mentioned that this feature lets you improve the image quality in a specific area of the video frame, at the expense of the rest of the image. You can select up to six areas, with freely adjustable size and position. Quality can also be adjusted from 1 to 6. For this example, I set it to the maximum to make the effect easier to see.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
I apologize in advance for the occasional video freezes. That's not a quirk of the camera—my computer is just getting old.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Naturally, I tried installing a memory card. No problems: I inserted it, closed the cover, and turned on the camera. The card was detected right away, but then you need to click the Format button. That's it. The rest is standard setup for motion-triggered recording and so on. With a memory card installed, you can easily access the footage stored on it from the client software, make backups, and so on—in other words, use the card just like a video server.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
I don't recommend setting a high recording bitrate, as this will wear out the memory card faster. It's also better to use a high-capacity memory card, so it will be overwritten less often. Having a memory card isn't essential for me, but I know they're working on software updates that will let the camera keep a temporary archive on the card. It would work like this— As soon as the connection to the server is lost, the camera starts recording to the card. Once the connection is restored, the footage on the card is added to the existing archive. This prevents gaps in the archive while the server or switch is rebooting or being repaired. To save the flash memory's lifespan, you could try setting it to record only when the connection is lost. I couldn't get it to work, but to be honest, I didn't try very hard. Maybe I'll give it another go later. To do this, select Alarm recording and set the alarm trigger to Connection lost.
This is what the memory card's file structure looks like after formatting and recording. You can also set it to take photos automatically. Recording worked flawlessly at the highest available bitrate, with no stuttering or video dropouts.
For testing, I put together a little “test rig”: a piece of laminate with two cameras screwed onto it. I positioned the cameras roughly parallel to each other.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
I'll try to group the photos and videos by shooting conditions. I'll post photos and videos, but since the website may alter the originals—and YouTube definitely does—I uploaded the original photos and videos for download. There are many more than shown in this review, and they may help you get a better idea of how the cameras perform.
The cameras were tested from two locations: the balcony and the window. The 3 MP camera is always shown first, followed by the 4 MP one. The timestamps on some shots don't match the actual time. I'll start by showing how they look from the balcony.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
A few more photos. Only one camera's IR illuminator is on; the outdoor lights are off.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
The IR illuminators on both cameras are off; the outdoor lights are off.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
The IR illuminator is off, the outdoor lights are off, and Day mode is enabled.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
View from the window.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
It got dark; Night mode is enabled.
4 MP DS-2CD2042WD-I camera and the updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
Same conditions, daytime mode. By the way, the 4 MP camera automatically switches to night mode
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
A small addition. Nighttime, streetlights off, 4th-floor height, 12 Mbps stream, 1/12.
4 MP DS-2CD2042WD-I camera and an updated version of my favorite DS-2CD2032F-I in one review
So, the tests are finished, at least the main part of them. It's hard to list the pros and cons, so I'll try to give you the overall picture. My impression is that the 4 MP camera performs a little better, but keep in mind that its image area is also slightly larger, so the difference between 3.2 and 4 MP isn't that noticeable.
The 4 MP camera has a noticeably wider horizontal field of view and a slightly narrower one vertically. I really liked how the 4 MP camera performs in night mode; there's clearly less noise.
While testing, I had both cameras open side by side in the software, and the noise from the 3 MP camera was very noticeable (especially the bands, though that's the built-in noise reduction at work). I even went and got another camera, but the result was the same. It's not a fault; that's just how it is.
The 3 MP camera can now record to a flash drive, but the housing is worse. It depends on what matters more to you. If the camera is indoors, the plastic housing doesn't matter. If it's outdoors, an icicle falling from the roof could damage it. At least, it's possible.
The 4 MP camera is advertised as supporting the new H264+ codec, but the decoder doesn't support it yet, so we'll have to wait for a software update.
Overall, I liked both cameras: the 3 MP for its price, the 4 MP for its better sensor. Camera prices generally tend to come down. When I wrote this review, the 4 MP camera cost $125; the seller has raised the price a little since then. It's a similar story with the 3 MP cameras: the actual price is around $80, you just have to wait for the next discount.
One small request in advance: please don't ask me which Full HD camera to choose for $20–30. I don't know the answer, since I use somewhat different cameras for work, and I introduced you to some of them in this review.
The usual question: would I buy these cameras again? Absolutely. I have bought them before, and I'll keep buying them.
I hope this information was useful and interesting. I'm looking forward to your questions and suggestions in the comments.
This page was found when searching for: как разобрать камеру видеонаблюдения hikvision ds 2032, 4, ip камера видеонаблюдения hikvision ds 2cd2042wd i, ds 2sd2d42wd1, ds 2cd2042wd i 4mm звук, rtl8201f распиновка, ds 2cd2042wd i с aliexpress, камера съемки 2cd2042wd i, камера ds 2cd2vc, камера ds-2cd2vc, ds-2cd2vc камера, ds 2cd2043go i 4mp что это такое, hikvision ds 2sd2143g0 i не работает через poe, как обжать кабельds 2cd2042wd i, http, ds 2cd2042wd i, ds 2cd2042wd i отзывы, видеокамеры разобранные механизмы, 1, ds 2cd2145fwd i как повернуть, сравнение hikvision ds 2cd2042 и dahua, hikvision ds 2cd2042wd i yfcnhjqrf pfgbcb, ds 2cd2042wd i длинна кабеля подключения, камера hikvision ds 2cd2042wd i отключается на морозе, ds 2cd2042wd i 4mm как подключить камеру распиновка
How do the Hikvision DS-2CD2042WD-I and DS-2CD2032F-I differ?
The DS-2CD2042WD-I has 4 MP resolution, a wider horizontal viewing angle, and less noise in night mode. The 3 MP DS-2CD2032F-I adds the ability to record to a flash drive.
How does the DS-2CD2042WD-I perform at night compared with the DS-2CD2032F-I?
In the author's test, the 4 MP DS-2CD2042WD-I showed noticeably less noise than the 3 MP camera.
What changed in the updated Hikvision DS-2CD2032F-I?
It gained the ability to record to a flash drive, but its front housing is now plastic rather than metal. The author presents this as a trade-off between added functionality and housing durability.
The figures from this review are in the measurement database: Other devices
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.