BX205, self-leveling cross-line laser level with five beams and a plumb point
During renovations, you often need a level for laying tiles, installing doors and windows, putting up ceilings, and hanging wallpaper. And that's not even counting shelves, cabinets, curtain rails, and the like.
That's why today I'm reviewing a tool that helps with this rather challenging work.
As usual, I'll take a look, test it, take it apart, and share my conclusions.
I'll start by saying that before ordering this product, I'd already had a chance to use similar equipment from other companies—or, more precisely, one other company: Bosch.
I used it while installing a ceiling and laying tiles (that's a whole story in itself), and it was a real help.
Also, while using this one, I remembered what it reminded me of. In appearance, it's most similar to the Laserliner AutoCross levels, though their price is noticeably higher—and not by a small amount.
In general, measuring tools from China are a tricky business, which is exactly why I decided to test this model.
So I contacted the manager and ordered the level and a tripod. The level arrived a long time ago, but there was a bit of a delay with the tripod. Since I was planning a comprehensive review, I had to wait for it.
In the end, I received a fairly large box, since the level comes in a carrying case.
And since the box was large, I had to take some of the photos on the floor.
The original case's packaging is purely symbolic: thin cardboard covered in a bunch of Chinese characters.
As I mentioned above, I ordered the level together with a tripod, choosing one of the simplest options.
Since all the photos of the tripod below will show it without its cover, I'll describe it now.
The fabric is very thin and looks like very dense blotting paper. Shops sometimes give you bags made of this kind of fabric when you buy clothes, although the strap is perfectly decent.
There's a zipper on one side of the cover, and I have no complaints about it either. The cover itself, though, could have been about three times thicker.
This is the case the level comes in.
On the one hand, it's very convenient. One of the things I look for when choosing a tool is whether it comes with its own case.
On the other hand, this case is meant to be handled carefully.
It's reasonably sturdy, of course, but I think tools—especially measuring tools used during renovations or construction—need a tough case.
The case is made from aluminum angle sections joined together with corner inserts made from a plastic-rubber hybrid.
There are loops on the sides for attaching a strap.
There's a carry handle on top, and I have no complaints about it :)
The case closes with this latch. This photo also shows that it's already had a run-in with the realities of life :(
This damage shows that it probably won't last long if you handle it carelessly. They could have made the walls out of some kind of plastic, after all.
Everything is packed quite tightly inside, and there's foam in the top of the case to protect the contents.
At the bottom of the case's inner section, there's a spot for mounting the device, which slots into specially shaped openings.
Despite the questionable design, I can say that the device is held firmly in place, with no play at all. Just keep one small detail in mind: don't push anything all the way into the central opening, since there's a protrusion in the middle of the device that is meant to fit there.
Here's the entire kit I ordered.
I wouldn't mind having a magnetic bracket too, so I could hang the device on a metal stud. But I couldn't find one, so I have a feeling I'll have to buy some magnets and cobble something together myself.
Now let's take a closer look at what's included.
1, 2 — The manual, almost entirely in Chinese, and it feels like it isn't even for this model.
3, 4 — Special red-tinted glasses. They don't look particularly stylish, of course, but they help quite a bit when working. The laser line is easier to see with them on.
The only thing is, they seemed a bit small—or maybe I just have a big head—but they fit snugly.
1, 2 — Surprisingly, a suction cup was included. I can't really see what it's for in this kit; the best I could come up with was sticking it to a wall and hanging the level from it. The wall would have to be smooth, though. No complaints about the suction cup—it holds great.
3 — A strap. Not much to say about it; it's just a strap.
4 — This is a fairly important part: an adapter for changing the angle of the level when mounted on a tripod.
It lets you set the level at any angle. I'll show you how it works later.
I sometimes complain when a power supply is called a charger, but in this case it really is a charger.
To be honest, I probably won't use this one, since I wasn't impressed with its quality and it needs an adapter for our outlets.
Rated at 4.2 V ±0.5 V, 500 mA.
The design is very convenient and easy to take apart. The plug connects not by wires, but through contacts on the circuit board. I've come across this kind of design before in one of my reviews.
The charger's electronics are extremely simple, which is exactly why I don't want to use it, although it works quite well as a power supply.
In my opinion, powering the level from a power supply isn't very practical, since an extra cable is one more thing you could accidentally snag.
And now we’ve reached the actual subject of this review.
What can I say? It’s big, it’s red, and it has a handle and feet :)
All in all, this is a fairly large level: 185 mm tall, with a base diameter of about 100 mm.
The level can be switched on in two ways. One is by turning this switch. Though “knob” would be more accurate, since it’s not just a switch but also the mechanism that unlocks the plumb laser.
The level is self-leveling, meaning it can operate when slightly tilted, compensating for the tilt with its internal mechanism.
If the tilt is beyond the self-leveling range, it emits an annoying beep to indicate that the readings are probably inaccurate. You can also fine-tune the setup using the adjustable feet.
There’s also a knob on the side for smooth rotation. Wikipedia calls this an elevation screw. I found it useful during testing, although ideally there should be markings around the level showing a full 360-degree rotation.
That said, you can simply rotate the level in the horizontal plane; the mechanism allows it.
There’s a threaded mounting hole on the bottom for attaching the level to a tripod, with the plumb laser installed inside it.
I’m not sure exactly what the plumb laser is for, since I’ve never needed one in real life, but I imagine it could be useful to someone.
In general, a plumb laser is used to transfer the instrument to a fixed distance more conveniently.
There’s also a hole on the bottom through which you can see a mounting screw. I didn’t unscrew it, but it looks like there are three screws. They’re needed to remove the base and are unscrewed one at a time after rotating the base by 120 degrees.
Battery compartment.
The instrument is powered by three AA batteries.
An unusual but fairly convenient feature is that all the batteries are installed the same way, with the positive end facing up.
Three batteries were included. I can’t vouch for their quality, but they didn’t run out while I was preparing this review and using the level.
Next to the battery compartment cover is a power supply jack, covered by a rubber flap.
And here are the main controls. This is what clearly differs between the manual and the unit I actually have.
In order:
There are four buttons on top.
V — turns on the vertical beams. It switches on all four vertical beams: front, right, left, and rear.
The beams are not switched on one at a time; each press adds to the ones already on. So first 1, then 1+2, then 1+2+(3+4); the fourth press turns off the vertical beams.
H — turns off the horizontal beam and plumb laser. They turn on automatically when the unit is powered up.
D — Detector mode. In this mode, beam brightness is reduced by about half. It is used with a special reflective plate to save battery power.
L — Lock mode. This mode keeps the unit powered on regardless of whether the internal mechanism is unlocked. It is needed when using the unit at an angle, since the mechanism must be locked in this mode; otherwise, it could be damaged, and the constant beeping would get annoying.
There are also three LEDs on top.
Detector mode
Power
Mode — operating with the mechanism locked.
There is also a simple bubble level on top to make it easier to level the unit horizontally.
The unit is quite heavy at 866 grams without batteries, even though the top cover is plastic. I consider the weight a plus, at least for this kind of device.
A few words about the tripod I ordered with the unit.
There are two versions, 1.2 m and 1.5 m.
I figured 1.2 m would be enough for me; it costs about $16.06.
The tripod is fairly well known; the only differences are a few minor details.
In its simplest configuration, it is quite low. If you don't want to put the level on the floor, you can use the tripod like this.
It stands about 36 cm tall in this position.
When extended, the assembly is secured with a plastic nut.
The side pieces are aluminum.
The legs are telescopic, with three sections: one outer and two inner. They are adjusted and locked using plastic mechanisms.
The upper section of the telescopic mechanism is operated by a side handle.
And here's how it differs from camera tripods. First, there is no swivel mechanism, since the tube has a through-hole for the laser plumb function.
Second, the thread size is different: the laser level uses a 15 mm diameter thread.
There is also a bubble level on top to make it easier to set the tripod level (though perhaps “plumb” would be more accurate), a handle for raising the telescopic mechanism, and a locking screw.
There is a toothed mechanism on the side of the extending tube, which is what raises it.
I don't know how long this mechanism will last, but so far there's no play.
The legs are at their minimum height, and the vertical column is fully extended.
In this configuration, the tripod looks a bit like the Eiffel Tower.
It's about 60 cm tall.
The tripod's design is very simple; I'd say it's intended more for home use. It probably won't last long on a construction site, and even if it survives the job, it'll have had a hard time.
On the other hand, I haven't tried it in those conditions, so I won't make any definitive claims.
But I can say for sure that you need a tripod; without one, it's very inconvenient.
The second stage was less a check than a real-world test of the conditions this device is meant to work in.
Since there isn't much left to test, I moved on to what I do with almost everything that lands on my “operating” table: taking it apart and analyzing its design.
Besides, I liked the test results.
More out of curiosity than anything else, I measured the current draw in different operating modes.
The readings were as follows:
Horizontal beam — 49 mA
Horizontal + vertical — 86 mA
Horizontal + 3 vertical beams — 124 mA
All beams — 200 mA
The current draw with all the beams on makes it clear why the manufacturer recommends using alkaline batteries.
Next came some additional tests.
Current consumption with the lasers off was 6.5 mA.
Since the laser emitters are modules consisting of a laser diode and a current regulator, I wanted to check the input voltage range over which the current would still be regulated.
I tested with all beams on.
4 V — 196 mA
3.5 V — 190 mA
When the voltage dropped to 3.2 V, the current began to fall noticeably, reaching 180 mA.
So the minimum operating voltage is 3.2–3.3 V, which makes it a pretty good candidate for conversion to lithium-battery power.
Replacing the bipolar transistors that supply power to the emitters could lower the minimum voltage to 2.9–3 V.
And here’s a comparison of the current consumption of a single beam as the supply voltage varies from 3.2 to 5 V.
By the way, some time later I decided to take the device apart again and measured the current consumption of the laser emitters themselves.
The main emitters drew 35 mA; the plumb-point beam drew 3.5 mA.
Tests complete, device disassembled, group photo :)
Now let’s take a closer look at what we’ve learned.
As always, let’s start with the verdict.
Pros
Good accuracy. If it weren’t for the right-hand beam, I’d give it an excellent rating.
Excellent beam alignment
Sturdy, solid construction.
Pretty good overall build quality
5 beams + plumb point.
Includes a carrying and storage case
Red glasses included.
Wide input voltage range; can be converted to run from a battery.
Cons
The case’s durability is questionable; it’s probably fine for home use and storage only.
The beams could be brighter; it probably won’t work well in sunlight outdoors.
A separate word about the tripod. It’s convenient and practical, but delicate. I’m not sure it would hold up under rough use; it’s clearly intended to be handled carefully. If you’re buying it for yourself, it should last, but if you hand it to hired workers, they’ll probably break it.
My take: it’s a decent device, and I like it, especially since it has a lot of work ahead of it. I was a little disappointed by the accuracy of the right-hand beam. It’s not a deal-breaker, but it is noticeable.
I’ll definitely convert it to run on a lithium battery, since buying disposable batteries would get expensive. Besides, I have a few 14500-size rechargeable batteries at home.
I’m used to treating my tools very carefully, so I’m not particularly worried about the case or tripod. Still, there’s a clear contrast between the sturdy device itself and the case and tripod.
It’s a shame there’s no bracket included, or available as an option, for hanging the level on a metal track or wall. You need one for marking the level at which to install ceilings.
As for whether I’d buy one: when a friend of mine who works in construction and renovation heard I’d got this level, he asked to try it. After using it for a week, he asked me to buy one for him too.
Of course, you could say the device is overkill for small jobs around the house and a basic two-beam level would be enough. I agree—I used to use a two-beam model myself. But it can also be useful to have those extra capabilities in reserve.
I hope this review is useful to anyone planning to do their own renovations or who deals with this kind of work often. As always, I look forward to your questions and suggestions in the comments.
The product was provided by the store for review.
лазерный уровень ток потребления, https://www.kirich.blog/obzory/tehnicheskie-obzory/149-bx205-samoniveliruyuschiysya-perekrestnyy-lazernyy-uroven-s-pyatyu-luchami-i-otvesom, лазерный уровень микросхема, микросхема плата управления лазерным уровнем, какие микросхемы ставят в лазерный уровень 5 линий, работа лазером с пятью лучами, bx 205, bx205 микросхема для лазерного уровня, микросхема для лазерного уровня на пять лучей, плата управления лазерным уровнем, нивелир лазерный микросхема, нивелир 5 лучей микросхема, счетчики перекрестного луча, 1818555/38grf0j6jokerrqciukuwa, бокс для лазерного уровня, что такое лазарный уровень с 5 лучами, бокс алюминиевый для лазерного уровня, лазерный уровень bx205 mikrosxema, двухлинейный уровень с перекрестным, bx205 плата, микросхема для китайскогоперекрёстного лазерного уровня, купить лазерный уровень дистар, микросхема для лазерного уровня, hy858 circuit, микросхема лазерный нивелир
Questions and answers
How accurate is the BX205 laser level, according to the review?
The author liked the instrument overall, but was somewhat disappointed with the right beam: its deviation is noticeable, though not critical.
What comes with the BX205?
The package includes a case, instructions, red glasses, a suction cup, a strap, an angle-adjustment adapter, and a charger. The author also ordered a tripod.
Why does the author plan to modify the BX205 power supply?
To avoid the ongoing cost of disposable batteries, the author plans to fit a 14500 lithium battery. The included charger did not impress him in terms of quality.
The figures from this review are in the measurement database: Other devices
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister



































































