/       /       /    MX4, another TV box based on the familiar RK3229
Support the project on Patreon


MX4, another TV box based on the familiar RK3229

$26.68
Go to store
I recently posted a review of a TV box based on the new RK3229, and today I have a more interesting version of a box with the same processor on my desk.
Unfortunately (or perhaps fortunately), it runs the same Android version: 4.4.
As usual, we'll take it apart, have a look, and test it.

On paper, judging by the title, this TV box and the previous one are identical, but in reality they're more different than you might think at first.
I'll say right away that this won't be a very long review. I'll briefly cover the main points, and if you have any follow-up questions, I'll answer them in the comments.

A few specs for the TV box
Processor — RK3229
Number of cores — 4 (ARM Cortex-A7 CPU, 1.5 GHz)
Graphics — Mali-400 (ARM Mali-400MP2 GPU)
RAM — 1 GB
Flash storage — 8 GB
WiFi: 2.4 GHz
Bluetooth 2.1
LAN — 100 Mb Ethernet
Ports: 4x USB 2.0, SPDIF (3.5 mm jack), HDMI, RJ45, SD Card
Analog audio/video output
H.265 support
4K resolution support
Operating system — Android 4.4
Dimensions — 117 x 117 x 27 mm

First, as always, the packaging. There's not much to it, but I'll post it here for the record.

The complete package looks like this:
1. TV box
2. Power supply
3. HDMI cable
4. IR remote
5. Manual

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

A closer look at what's included.

The HDMI cable is very basic; the only notable thing about it is its length: just 0.7 m.
Not long ago, I was looking for a short cable and couldn't find anything under 1 m locally, so I ended up buying a 0.3 m cable from China.
The remote is a classic—most inexpensive TV boxes come with one just like it.
The power supply looks very similar to the one included with the previous TV box. Same shape and specs. The difference is that this time they sent a power supply with the “right” plug, one that fits our outlets properly.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

A closer look at the power supply's internals.

The TV box comes wrapped in film to protect the case surfaces from possible scratches.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

Of course, we’ll peel off the film. There’s no point in keeping it: it spoils the appearance and may impair cooling.
Its dimensions are closer to average. Compared with the previous “fellow,” this model is taller, and the whole thing seems bigger to me as well.
The top of the case is matte, slightly rough, and picks up dust easily; the sides are glossy.

The first thing that catches your eye is the lack of a power button. Yes, the box starts up as soon as power is connected. I’d say that’s a big plus for some applications. There is a catch, though: if you shut it down from the menu, you can only turn it back on with the remote—or by unplugging and reconnecting the power.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

A few words about the peripheral connectors.
On the right side:
1. A memory card slot. In this case, it takes a full-size SD card rather than the usual MicroSD. It’s a somewhat odd choice—I’ve come across it before, but still don’t understand it. You can use MicroSD cards too, with an adapter.
On the one hand, it’s a more versatile solution; on the other, it’s less convenient.
2. Three USB ports.

There are quite a few more connectors on the back:
1. Another USB port.
2. A digital audio output, but via a 3.5 mm jack rather than the usual RCA connector or optical output.
3. Analog audio and video output.
4. HDMI video output for connecting a monitor or TV.
5. A 100 Mbps Ethernet port for connecting to a local network.
6. 5 V power input.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

The underside also has some notable differences. Before this, I’d often come across boxes—whether running Android or Windows—with a completely flat bottom.
This one has not only plenty of ventilation holes on the bottom, but also four rubber feet. In addition, the corners of the bottom are raised quite a bit above the main surface, leaving a fairly large gap between the bottom and whatever surface the box is sitting on.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

To keep up the established tradition, I took the TV box apart and had a look inside.

We’ve looked at the hardware, so now let’s move on to the software review. There are a few differences here too.
In the test comments, I’ll give the results from the previous version of this TV box with the same processor.

First, we’re greeted by the same launcher as in the previous version. The app list is a little different, but basically it’s “same old, same old.”

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

Of all the apps installed on this TV box, only two are really worth mentioning: Kodi and YouTube. That’s it. Since these apps are probably present on 99% of TV boxes, I won’t dwell on them.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

This time, there are three launcher options instead of two.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

The second option is just as familiar as the first, maybe even more so.

The third option, though, was new to me. At first I thought it might be convenient, but it turned out a little differently.

As before, the TV box runs Android 4.4.4.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

It has the first (judging by the version number, 1.0.0) and latest firmware version available at the moment, so some issues are to be expected. That said, I didn't find any major problems (apart from the issues with the new shell).

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

I tried connecting to my access point from the network settings menu, but unfortunately I could see my neighbors' familiar access points in the list, while mine was nowhere to be seen :(

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

In the end, I grabbed another router and tested it in the same room as the TV box.
First, the result from about a meter away from the TV box. My internet connection is 50 Mbps.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

Then I tested it in the other corner of the same room, and the result was noticeably worse.
This test showed that Wi-Fi performance isn't quite what I'd hoped for.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

The information from CPU-Z didn't tell me anything new, since in this respect it's essentially the same TV box as last time.

Next came the installation of various apps for testing, followed by the tests themselves.
During installation, I kept getting prompted to enable automatic app verification.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

Tests.
First up, the popular AnTuTu Benchmark.

Next up was the equally popular 3DMark test.
Here too, the difference is within the margin of error: 2193 for the unit under review versus 2165 for the previous one.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

PCMark scored 2360, compared with 2488 for the MX mini.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

I could only run the Epic Citadel test at 1280x672; the app absolutely refuses to update.
Since the resolution is lower than last time, the result was predictably higher: 50 versus 46.5.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

NenaMark gave exactly the same result as on the MX mini: 58.9.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

The video output initially worked at 1920x1080p-60, and worked the same whether connected directly to the monitor or through an HDMI-to-VGA converter.
The only downside of using the converter was that I simply couldn't get a “pixel-perfect” output.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

There were no issues at all when connected via HDMI; the video output was correct.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

And since the box has analog audio and video outputs, I tested those too.
For the experiment, I connected the TV box to a small TV. The picture doesn't look great on such a small screen, of course, but everything is readable, and you can definitely watch a movie on it.

MX4, another TV box based on the familiar RK3229MX4, another TV box based on the familiar RK3229

I won't show the remaining tests; I'll just describe them.
AnTuTu Video also failed to complete, stopping (but not freezing) at 91%.
I also couldn't play the h.264 10bit test videos from the previous review. Well, just like last time, I could play only one of them, but it was low-resolution, so it wasn't very interesting.
However, there were no problems playing 4K video at 100 Mbps. I couldn't find any video with a higher bitrate; if you know of one, let me know.

Since measuring the temperature was inconvenient and the TV box doesn't provide this information, I checked how much it heated up indirectly by measuring its power consumption.
Idle current draw is 0.3 A, or 1.5 W.
The average current draw recorded during the AnTuTu test was 0.4 A, or 2 W.
The maximum current draw recorded during the AnTuTu test was 0.5 A, or 2.5 W.
During 4K video playback at 100 Mbps, the highest power consumption (with a flash drive connected) was an average of 0.55 A, with brief peaks of 0.65 A, which works out to 2.75–3.25 W.

Since this was the total power consumption, including the converters, memory, and audio output chip, I can say with confidence that it doesn't overheat. The processor gets roughly 1 to 2.5 W at most, and with a heatsink installed, its temperature won't get very high.

And now for the verdict.
Pros
Stable operation
S/PDIF output
Analog audio and video outputs, although the cable isn't included.
Excellent assembly and good-quality components
A perfectly decent power supply included
4 full-size USB ports
HDMI 2.0 support claimed (I can't verify this)
h.264 10bit video decoding support claimed (not confirmed)
Automatic startup when power is applied
Price

Cons
Support for h.264 10bit video decoding remains questionable.
Wi-Fi reception isn't very sensitive, and it only supports 2.4 GHz.
Not very suitable for gaming.

My take: a pretty decent TV box for the money. Of course, gaming performance will be lacking, but that was easy to predict even without testing. The TV box has plenty of USB ports, which is really handy: you can connect flash drives, a mouse, and a keyboard. And since it also has Bluetooth, you can free up one more port if you need that interface.
I was a little surprised that the developers used a full-size memory card slot instead of a microSD slot. I was also surprised by the lack of a power button and the automatic startup when power is applied.
Automatic startup can come in handy when the TV box is used autonomously. I can't remember who, but someone once asked me about this feature.
The components were a pleasant surprise. I expected to find Foresee flash memory inside, but it turned out to be a perfectly decent SKhynix chip.

Overall, I think this TV box is noticeably better than the one in the previous review, although their performance is practically identical. In short, it's another box that works well as a streaming and reading device: watch movies and browse the internet.

Thanks for reading. I hope the review was useful. If you couldn't find some information, ask me and I'll check what I can.

The store provided the product for review.
$26.68
Go to store
This page was found when searching for:
https://www.kirich.blog/obzory/tv-boksy/166-mx4-esche-odin-tv-boks-na-uzhe-izvestnom-rk3229, тв бокс на андроиде интерфейс настройки, mx 10 rockchip android настройки опции, 8, схема питания процессора тв бокса, tv box mx4m rk3229 прошивка, как настроить голосовой поиск на тв боксе, tpf632

Questions and answers

What are the MX4 TV box specifications?

It has a quad-core RK3229 clocked at 1.5 GHz, 1 GB RAM, 8 GB storage and Android 4.4. Other features include 2.4 GHz Wi-Fi, Bluetooth 2.1, 100 Mbps Ethernet and four USB 2.0 ports.

How does the MX4 differ from the previous RK3229 TV box?

Their performance is almost the same, but the MX4 has four USB ports, a full-size SD card slot and starts automatically when power is applied. The author also considers its included power supply better than the previous one.

Is the MX4 TV box suitable for gaming?

Not particularly: the author says its performance is weak for games. The MX4 is better suited to watching videos and browsing the internet.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister