ESCAM Q8 and Sricam SP022 network cameras: so different, yet so alike
$29.93 + $26.87
I wouldn’t say there’ll be a lot of testing, but there will definitely be a teardown and comparison.
A recent, unexpected incident prompted me to get this pair of cameras for a review. I was hoping to put them to use at home.
The incident was this: one night while I was working, I heard someone tug the door handle a few times. It was around 3:30 a.m. Everything was quiet, and the front door is positioned so that I could not only hear it clearly, but see it too. I went over to the video intercom and turned it on, but by then there was nobody there.
That’s what gave me the idea of putting a surveillance camera in the entryway, with Wi-Fi and recording. As it happened, I came across a pair of cameras that seemed like they’d be a good fit for the job.
Unfortunately, the experiment ended before it really got started. But I won’t get ahead of myself; I’ll explain what happened in order.
First, let’s take a look at the outside and inside of the two cameras I ordered for this review.
First up is a camera from the relatively well-known manufacturer Escam. I think quite a few people have at least heard of the company.
ESCAM Q8. Link to the product page; it costs about $29.93.
The camera on the manufacturer’s website.
Specifications:
System OS - Embedded Linux OS
System security - Registered account, password authentication
Sensor - CMOS 1.3 MP 1/4"
Focal length / viewing angle - 1.44 mm, 360°
Minimum illumination - Color: 0.1 lux, B/W: 0.01 lux
Illumination - 3 pcs IR LEDs, range 5–10 m
Video compression - H.264
Resolution - HD (960P), fluent (VGA)
Frame rate - 25 fps
Audio - built-in microphone/speaker (8 Ω, 1 W)
Network Protocol - TCP/IP, SMTP, DHCP, NTP, P2P, RTSP
WIFI - WIFI 802.11 b/g/n
AP Mode - Support AP mode connection
IP address - Dynamic IP
ONVIF Protocol - Onvif
Remote viewing - App for iPhone, Android (iOS 4.3, Android OS 2.3 and above)
PC View - PC Client for Windows system
Alarm - motion detection supported
Alarm functions - email alarm, alarm push, buzzer, alarm recording
Storage - built-in support for 128 GB MicroSD card
Power - DC 5 ± 0.3 V, 3 W (MAX)
Operating conditions - -10 to 50 °C, 10% to 90%
Weight - 80 g
Dimensions - 93 × 88 × 35 mm
The packaging is very basic and was also a little battered during shipping, though the contents were unharmed.

The package contents are quite good and include:
1. The camera itself.
2. Power adapter
3. USB-to-microUSB cable
4. Manual
5. Reset pin
6. Mounting hardware
7. Plastic mount for ceiling installation
8. Double-sided tape

1. The manual is in English and includes pictures. Unfortunately, I had to figure most things out for myself.
2. The cable is nothing special, just a regular cable.
3. A 5 V, 1600 mA power adapter. Exactly the same adapter came with a pan-and-tilt camera from the same manufacturer. It’s more than enough for this one.
4. Mounting hardware for every situation. They also included a “pin,” since the reset button is recessed and can’t be pressed with a finger.

When I saw this camera on the store page, I hadn’t really thought about its dimensions, but in person it turned out to be quite compact. The camera comes in two versions, with a black or white body. I chose white so it would be less noticeable on the ceiling. But the black plastic around the lens still makes it stand out quite a bit.

All three corners of the upper part of the body have something in them: the activity indicator is next to the logo, while the microphone and speaker are on the other two sides.
The camera can also be mounted on a standard tripod; its thread matches the one used on cameras and camcorders.
The round plastic insert is for mounting the camera on a ceiling or wall. You can either screw it in place or attach it with the double-sided tape. The camera then mounts onto it. The camera mount looks questionable. I wouldn't risk leaving a camera with this kind of mount out in the open; it clearly looks like a DIY solution.

One end has a reset button, a memory card slot, and a microUSB port for connecting the power supply.

The camera looks quite neat, and I have no complaints about the build quality. Everything fits together pretty well.

Since I was much less interested in the camera's exterior than its internals, I decided to take it apart right away.
Undo the three screws and remove the bottom cover.

A small circuit board is tucked inside, along with a speaker and microphone. All the connections to the board use plugs, which is a plus for the manufacturer—they didn't cut corners on such a small detail.

The WiFi antenna is glued to the case. This is a fairly common approach, of course, but I can't say I'm a fan. Still, the WiFi worked, so I won't complain just yet.
Judging by the empty space for an Ethernet connection, the board is probably universal, and there's a version that can connect via cable.

Undo three more screws and take the board out of the case.


The decorative front panel also acts as a filter for the IR illumination, so let's remove it too.

The IR illuminator uses three LEDs. The aluminum frame also serves as a heatsink to cool them. I think the design is pretty well thought out in this respect. But you can clearly see the LEDs in the dark, so at night the camera will give itself away completely—which is true of the vast majority of cameras, anyway. LEDs with a different wavelength are sometimes used, but very rarely, since the sensor is less sensitive under that kind of illumination.

The underside of the circuit board, with some unpopulated component pads.

Let's go over what's installed.
1. The SoC GM8135S-QC is based on an ARM core running at 600 MHz and has 512 MB of built-in RAM.
2. Next to it is a 25Q64 flash memory chip with a capacity of 64 Mbit.
3. The WiFi module is based on the Realtek RTL8188, a 2.4 GHz module that uses the USB 2.0 interface.
4. Some of the circuitry is powered by the EA3036C regulator.

1. An EEPROM chip is installed on the top side.
2. I also found a pair of 8002B audio amplifier chips on the board. I assume one drives the speaker and the other controls the IR filter shutter.
3, 4. And another pair of voltage regulators.

Undo two more screws and remove the lens assembly with the IR filter.

The sensor is quite large. I didn't think to measure it, but it's a little bigger than an SO-8 package, which is about 4 × 5 mm, so the sensor is roughly 4 × 6 mm.

You wouldn't guess from the lens that the camera has a wide field of view.

Sricam SP022
The second camera has very similar features, but differs noticeably in both appearance and packaging.
And the name, too. Seriously, who came up with the name Sricam? Of course, the name is pronounced a little differently from the way you might want to read it, and it's not quite on the level of toys sold under the Huina brand, but still. Maybe it would work well with Dahua recorders—it would look right at home there :)
So, the second camera is the Sricam SP022. Here's the link to the product page; it costs about $26.87.
The camera is on the manufacturer's website.
As you can see, the price is comparable to the Escam, which is why I decided to compare them.
First, the technical specifications.
You don't need to look too closely at these; I didn't even bother translating them, since they're practically identical to the ones I showed at the very beginning of the review.

The packaging is much neater this time, though: color printing, a magnetic lid—pretty nice :)

Everything is packed snugly in its own compartment. I could barely pry the camera out; it was wedged in so tightly. All in all, it gets the stamp of approval for surviving postal shipping!

The package includes:
1. Sricam SP022 camera
2. Power supply
3. USB-microUSB cable
4. Mounting hardware
5. Manual
6. Paper clip

Curiously, the store page lists a different package, while the one shown above is what's listed in the manual. So, which one should we believe?
The picture shows an extra bracket. I won't argue—I already have plenty of those at home—but it's still a bit misleading.

1. The manual consists mostly of pictures, but it even helped with the initial setup.
2. The cable is pretty standard, although the right-angle microUSB connector may come in handy, so that's a plus.
3. The 5 V, 1 A power supply behaved well in use and caused no problems.
4. The mounting hardware consists of one wall plug and one screw. The “paper clip” is for accessing the reset button, and I can confirm that it's really needed, unlike on the previous model, where you could press the button with a pencil.

The previous camera was fairly compact, but this one is even smaller. It's a little taller, though: the previous one was more flat, while this model is spherical.

1. Interestingly, it even has a warranty sticker.
2. One side has a mount for attaching it to a bracket. I tried mounting it on a regular tripod, but, as with the Escam, the thread is shallow and the camera wobbled. Dedicated brackets have an extra nut that lets you secure cameras with almost any thread depth.
Above the connector is a microUSB port for power. This made mounting the camera on a bracket more of an adventure, since even the right-angle plug got in the way. What would have been so hard about putting the port a little farther to the side?
To the right is a slot for a memory card. It's awkwardly designed—the card sits very deep inside.
3. As you'd expect, the lens is on top. The light sensor for switching on the IR illumination is also on the front.
4. The wall mount is as basic as it gets—just “hang it on a nail.” There's a small loop at the top for this. The reset button hole is at the upper left. The button is recessed very deeply, and although they included a metal “poker,” I recommend using something nonconductive. I'll explain why later.

We've had a look at the outside, so let's open it up. Remove the four screws and take off the back cover.

The board fills all the available space here, which makes sense—the housing is noticeably smaller.

To access the other side, just remove the board. It was held in place by the same screws as the housing.

The IR illumination board is also a little simpler: a dozen small LEDs and a photosensor. Speaking of the photosensor, credit to the manufacturer for choosing one that matches the color of the front of the housing, making it almost invisible. It looks neat overall.

The components are packed in pretty tightly. You can see the microphone at the bottom, but I couldn't find any opening for it in the housing. Everything it picks up comes straight through the housing—or, more precisely, through the holes in the back cover.

This model uses a slightly different lens, whose curvature makes it look more like a “fisheye” than the one on the previous camera.

Let's remove the lens and IR filter actuator to get full access to the board. The WiFi antenna is visible in the photo; it's not secured to the housing at all, just inserted into place. It even retains the characteristic bend that follows the shape of the housing. As with the previous camera, the antenna is connected via a plug, so it can be replaced if needed.

Here, too, the manufacturer seems to believe that all connections should be detachable. I wouldn't say that's especially important, but it is convenient—especially when taking photos for a review :)

And now, what I mentioned right at the beginning. Both cameras use the same components, with only very minor differences.
The top of the board has the same audio amplifier and WiFi module. Below are a pair of converters—probably the only significant difference.

The image sensor is also identical to the one in the Escam, measuring about 4 × 6 mm.

It also uses the same GM8135S-QC SoC and 25Q64 flash memory as the Escam. What’s more, even the audio amplifiers are almost the same: 8002A instead of 8002B. In my review of the Escam camera, I wrote that it uses two of them, one for the speaker and the other to control the IR filter actuator.
The fourth photo shows the reset button and how many components are packed around it. There’s a hole in the case to access it, although it would have made more sense to add something like a tube to guide a paper clip. As you can see, it’s easy to miss and accidentally short the contacts. Mine was fine, but I’d still recommend being careful.

The last photo of the internals is mostly a reminder to myself. When I reassembled the camera, I put the board in the case, screwed in the four self-tapping screws, and only after failing to close the case did I realize that the board goes in first, then the case is assembled, and the screws are tightened at the very end. There are also two screws at the top; I’d already removed a couple at the bottom.

Let’s move on to the software.
Escam camera software.
I ran into a few difficulties here. The camera has no Ethernet port, so all connections are made over WiFi. But first, you have to connect to the camera.
Initially, the camera appears as an open access point. When I turned it on, it also started making strange noises. And since, as usual, this was happening at night, that added quite a few “pleasant” minutes to the experience.
After connecting, I launched one of the apps already on my phone. What followed was an unusual attempt to connect.
Open the section for adding a new device, choose the connection method, and the app tells you to hold your smartphone closer to the camera. Then tap Search and enjoy the hellish sounds, reminiscent of an ancient modem squealing.
No, the idea itself is convenient and simple—if only it worked...

All right, I thought, the official app should connect without any trouble. I downloaded it, installed it, launched it, and—“surprise, surprise”—it wanted me to register.

Escam software walkthrough.
Registered—hooray!
Yeah, right. No such luck.

All right, I’m persistent, so I’ll try again. I connect to the camera—oh, the app finally launched! Now I’ll just do this, and we’re done!

The app sees the device, and after a few tries the lengthy setup process finally completes. Hooray, we’re online :)))

Anyway, I think you’ve got the idea: the connection process is confusing and entertaining. As they say, “Got some free time and nothing to do with it? Try the Escam app—the perfect solution to all your problems :)”
Next, switch the camera from access point mode to client mode—in other words, connect it to your home network. This part went smoothly: launch Camera Setup, find your access point, enter its password, then set a password for the camera so nobody else can get in. The app sends all the settings to the camera, which switches to the appropriate mode and reboots. Once it’s back up, it connects to your home network automatically.

The rest is basically a walkthrough of the camera software and the remote monitoring app. This screen shows device information and lets you rename the camera. The name didn’t matter to me since I only have one camera, but renaming is useful when you have several, so you don’t mix them up.

1. Time settings. This is straightforward: set the time and time zone. Since the camera has no battery, it actually gets the time from the connected computer or smartphone.
2. PAL/NTSC changes the maximum frame rate. Since this is essentially just an advanced webcam, the only image quality setting is a Low/Medium/High slider; there are no other adjustments. The rest of the settings are self-explanatory.
3. The camera can operate in two modes: standalone as an access point (the default), or as a client. In the latter mode, you configure the connection to your access point. I’d already done this a few steps earlier.
4. Configure event notifications. But to receive notifications, you’ll need to create an account, as I did at the very beginning, and link your phone to it.

1. The screenshot shows that the memory card hasn’t been installed yet. I later tried two different cards, 2 and 32 GB, and had no problems with either.
2. Adding various sensors, but since I don’t have any of those, we’ll skip this step.
3. You can view snapshots, which are saved to a separate folder. It’s actually quite convenient in its own way: while viewing, tap the camera button to save a snapshot. You can also do this while watching a recording. But there’s nothing new here; it’s a standard basic feature.

The camera settings were listed above; these are the settings for the surveillance app itself, although at first glance it might seem like I’m going over the same ground again.
1. The app settings list.
2. Account information and the option to link a phone.
3. I hadn’t launched the software for quite a while, and on one of my next launches it notified me that a new version was available. Well, that’s nice. By the way, if I remember correctly, the camera also got a new firmware version right at the beginning. This feature is actually implemented very well: when new firmware or a new app version is available, a notification appears offering to update.

1. There’s also an option here to control the operating mode: access point/client.
2. Change the WiFi password. This is necessary in access point mode, since the camera comes with a blank password by default. If you mess something up, reset the camera by holding down the Reset button.
3. After changing the password, the camera disconnects and reconnects using the new password.
4. So, in the end I switched the camera to client mode, meaning that when powered on, it automatically connects to my router. Here are a few examples of how the video is displayed.
The basic mode is like a porthole: a round screen showing everything the camera captures. You can rotate the image, expand it to full screen, zoom in, and turn it any way you like. But there’s a major problem: the image on the screen seems to have a mind of its own. You rotate it a little with your finger and it seems fine; rotate it a bit more and it flips, gets squashed, or does something else. For example, it may rotate however it pleases. Overall, the implementation gets a 3 out of 10.

There are three more alternative modes:
1. The screen is divided into four sections. You can adjust the viewing angle a little in each section, but overall this mode is pointless.
2. A mode where the image looks like a “bowl.” I didn’t understand what this mode is for at all.
3. “Wheel.” Probably similar to the “bowl”—just as ridiculous.
After playing around with the different modes, I can say that the “porthole” mode is the only one that’s more or less usable—that is, when the camera simply shows everything as it is, without software processing. Although there’s always some processing, since you can rotate the image even in the first mode. Essentially, the camera has only a vague notion of up and down.
By the way, after numerous attempts to connect the camera to video surveillance software on my computer, I managed to “see” the camera in one of the programs (but not its image), and it showed up as four cameras.

If you expand the image to full screen on your smartphone, it’s easier to use.
The button on the left selects the display mode; the screen shows the default view.
The column on the right, from top to bottom:
1. Record.
2. Turn the camera microphone audio on/off.
3. Photo.
4. Send audio from the smartphone to the camera’s speaker. It works as long as you keep your finger on the microphone icon.
5. Gyroscope emulation mode; control rotation by changing the angle of the smartphone.

Like any halfway decent piece of software, this app can also play back recorded video. The video is recorded to the memory card inserted in the camera.
The controls are fairly standard: previous clip, play/pause, next clip, and fast-forward. But to the right of the slider there’s an extra button with a camera icon. This button lets you start recording whatever is currently playing to the smartphone’s memory. In other words, it’s essentially a backup feature. Convenient in its own way, though a bit unusual.

Sricam camera software.
Since I had two cameras on hand, it seemed logical to first try linking the Sricam camera to the Escam software, especially since their hardware is very similar.
But unfortunately, after trying a whole bunch of different connection methods, I got nowhere. Like the previous camera, when powered up while disconnected (that is, in an undetermined state), the Sricam beeps at intervals of about 10 seconds. This little beep is a command to connect using sound recognition.
My phone has accumulated quite a collection of different apps, and I tried them all. The result was the same every time: pairing doesn't work with any of them.

I also had to go to the Play Store and download the manufacturer's app.
It also asks you to register. It's pretty straightforward: enter a valid email address, choose a password, and you'll be given a code.
Enter the code you were given and the password you chose in the app, and that's it. The app is ready to use.

About the Sricam app.
For this group screenshot, I had to reset the camera settings again. The process is the same as with the Escam: hold down the reset button for 10–15 seconds—or, more precisely, wait until the camera beeps, then release the button. If you hear a beep every 10–15 seconds, everything is fine.
You don't need to do this when setting it up for the first time; the camera comes in a "clean" state. So, here's what to do:
1. Turn on the camera, open the connection settings, and find the access point named after the camera, as shown in the screenshot. Connect to it; no password is needed.
2. Launch the app and tap the camera connection icon.
3. It asks you to enter the device ID.
4. Turn the camera over and either enter the number from the label or tap the barcode icon to switch to scanner mode.
5. When you scan the code, it is entered automatically.
6. Enter the password. The default is 888888.
7. Here you're asked whether to leave the camera working as an access point or connect it to your local network. In the first case, the camera can work on its own, but there will be no remote access. In the second, you can access it both over your local network and from the internet using your smartphone.
8. Since the camera's range in standalone mode is limited by the camera itself, I connect it to my network (Wi-Fi setup).
9. Find my network and enter the password.
10, 11. You can change the default password, 888888, or leave it as is. I definitely recommend changing it.
12. That's it, the camera is connected. The app's main screen now shows the camera feed and a green dot. Red means the camera isn't connected, yellow means it's connected with limitations, and green means everything is OK.
I have to admit, the setup process here is noticeably more convenient than with the Escam, although it's possible I simply got something wrong from the start last time and the process could have been easier.

A little about the camera settings. For the most part, they're almost identical to those on the Escam camera, which isn't surprising since the hardware is the same.

Some of the translated labels are mind-boggling. For example, what on earth are "confrontation settings"?
The camera originally came with firmware version xxx.29.

It immediately offered to update the firmware to version xxx.30, which I did.
When I tried turning the camera on a month later (that's just how it worked out), an update to version xxx.34 was available. So the developers are clearly working on their product, which deserves credit, since the Escam hasn't received any updates.
The last screenshot shows the camera's internal IP address, which indicates that it can work without internet access, as long as it's on the local home network.

1. The video surveillance app settings are a little different.
2. As far as I can tell, these are the settings for the default startup mode. I was happy with the original settings, though.
3. Notifications for alerts from the camera(s).
4. Access to the remote camera's memory card. It asks you to select a camera, but since I only have one, there's nothing to choose from.

1. Both cameras record in the same way: the archive is a huge pile of small files. Some of them have a really bizarre time code, like 54255 seconds.
2. If you have saved videos on your phone, you can view them separately.
3. Since you can take screenshots while watching a video, there's also a separate menu for accessing them.
4. The video switches to landscape orientation, which I'll show later, while photos are displayed in portrait orientation, as shown in the last screenshot.

The video playback menu is different too. Here's what it can do.
At the top left is a button to return to the app's main menu. I recommend using this button.
There's a whole row of buttons at the bottom.
1. Automatic image rotation. By the way, this app makes it easier to control how the image is displayed.
2. Start recording video manually.
3. Take a screenshot.
4. Display modes: to use the terminology from earlier, there's the porthole, wheel, and four-screen modes. The Escam also had a "bowl" mode. In practice, though, only the first mode is useful; the rest are just "smoke and mirrors".
5. Mute the camera. Sound is on by default.
6. Flip the image. Although the camera can rotate the image, it has a default orientation, so there’s a flip/mirror function to make it easier to use.
7. Lock the operating mode.
8. Open the settings menu, which I showed above.

Display modes:
1. Expanded “wheel”—a useless feature.
2. Four screens—no less useless. Essentially, the display is split into two sections, not four, since I can show the same image in both top sections, and likewise repeat the bottom sections.
3. Tap the image in the standard mode (porthole view) to zoom in. But with the wide viewing angle and low sensor resolution, you get what you get—in short, a mess.
4. Built-in player for recorded video, almost like Escam’s, except there’s no way to copy videos to your smartphone.

The idea is that both cameras should show the view as pictured below. This is an advertising photo of one of the cameras.
In reality, of course, it’s not nearly as colorful, although both cameras have a pretty decent viewing angle. For example, one camera can see an entire 3 × 6 m room. But if you have a chandelier on the ceiling, it won’t work properly; a clear ceiling is best for a good image.
The ad photo also shows the three main display modes, but only the standard mode is shown at the top. As I said, the rest is just “look what I can do”—though it’s really no use at all.

In the teardown and external inspection section, I mentioned that the Sricam camera has a more convex lens, which ultimately affects its viewing angle.
For comparison, here’s a frame from the Escam.

And here’s a frame from the Sricam, taken from almost the same position (using a tripod).
The image on the right is almost the same, while on the left you can see things that weren’t visible in the Escam’s frame. That said, “visible” is a relative term. With such severe geometric distortion, you can only make things out in a very rough sense.

The IR illumination obviously won’t work outdoors, but indoors both cameras perform almost identically. Both cameras are fairly sensitive, and since the lens is wide-angle, the camera can “see” better in the dark. I can say that visibility in a typical room will be quite good. The Escam has more powerful illumination and is better suited to larger rooms; its lens also has a narrower viewing angle.
One caveat: if you mount the camera on the ceiling, you’ll get a bright spot directly underneath it. The camera has AGC (automatic gain control) but no BLC (backlight compensation), so if the floor reflects light well, that bright spot will be all you can see. It’s better to mount the camera on a wall.

By default, both cameras take screenshots at the odd resolution of 896 × 896 pixels, or about 0.8 MP. But that’s a minor issue. When you take a screenshot on your phone, you can frame it however you like. With both cameras, though, it’s a real “Indian national hut”: screenshots are taken in the camera’s default orientation. To explain: no matter how you mount the camera, you can rotate the image however you like for viewing, but the screenshot is tied to the camera’s absolute orientation. If the camera is mounted crooked, the screenshot will be crooked too. For wall mounting, both cameras should be installed with the connectors facing down.
First up is the Escam.

Second is the Sricam. By the way, both cameras show a wider view in this mode, so you can see things that aren’t in the frame during normal viewing.

The same thing, but using the smartphone itself—that is, what you’ll see in the app. The cameras were in the same position for all the shots; the toys were about 4 m away, and a human face can be recognized at a distance of roughly 3 m. The test took place on a balcony with overcast weather and the blinds drawn, so the lighting wasn’t very good—but that actually makes it a better experiment.
Escam
1. Full image
2. Zoomed in
3. Split screen into four sections
4. “Wheel”

Sricam offers more convenient zoom controls, so I got more images here.
1. Full image
2, 3, 4. Three zoom levels
5. Split screen into four sections
6. “Wheel”.

One small point in the Sricam’s favor: it has software for a computer. Connecting the camera is very simple: launch the software, click the plus sign at the bottom left, then enter a camera name (make one up), the camera ID (printed on the bottom of the camera), and the password (888888 by default).
That’s it. Everything else is automatic. It definitely works over a local network; it presumably works over the internet too, judging by the fact that you enter the camera ID.
There are very few settings: you can change the password for launching the program (adminadmin by default) and choose where to save videos and photos. And of course, there’s a simple little player.

To sum up briefly, I’d give the edge to the Sricam, and for several specific reasons.
1. Sound. The ESCAM’s is much worse. I’d even say the Sricam has sound, unlike the...
2. Audio glitches. When you turn on the ESCAM camera, you’ll probably hear some quiet sounds, but once you connect to it, that’s when things start. The camera’s speaker periodically crackles, clicks, and picks up interference. There are probably problems with the circuit board layout and power filtering: when the WiFi module’s load increases (interference gets worse as the signal weakens), interference from it starts getting into the camera’s speaker amplifier. I’d never install one of these at home, and if I had to, I’d physically disconnect the speaker...
3. Software. The Sricam software behaves more reliably and is nicer to use. There’s no image that “rotates by itself,” which sometimes annoyed me with the ESCAM. Annoyed? It could drive an unbalanced person right up the wall :)
4. Setup. Sricam wins hands down here; the initial setup is much easier.
5. Field of view. It’s not so clear-cut here. The ESCAM has a narrower field of view, but since the camera’s resolution isn’t very high, I’d prefer the ESCAM—the image quality ends up a little better.
6. Ease of controlling image rotation. Definitely Sricam, since the ESCAM rotates the image however it wants, not the way you want it to.
7. Design. I prefer the ESCAM’s mounting options; it can be installed in different ways. But inserting a memory card is awkward on both cameras. Actually, no—the Sricam is worse: the card sits deep inside and keeps trying to “shoot” out because of the strong spring.
8. Settings. More or less the same.
9. WiFi. Also about the same, with average sensitivity. But since the cameras essentially transmit streaming video, you should place them close to the router; otherwise, you may experience delays.
10. Power consumption. I didn’t mention this in the review, so I’ll cover it here.
ESCAM: 350 mA with the IR LEDs off and 700–750 mA with them on.
Sricam: 350 mA with the IR LEDs off and 450 mA with them on.
11. IR LED control. The ESCAM handles this better: the IR LEDs turn on in two cases—when a memory card is installed and recording is configured, or when you connect to the camera to view the feed. In other words, the IR LEDs stay off when neither recording nor viewing is needed. On the Sricam, they stay on whenever it’s dark.
12. Neither camera is suitable for setting up a video surveillance system: they can only record to their own memory cards, are not well protected against the camera itself being stolen, and when mounted on the ceiling you’ll only see the top of someone’s head. They run on 5 V, so you’ll need to install either a power supply or a 12-to-5 V converter nearby, and so on.
13. Both cameras are suitable for checking roughly what’s going on in a room (for example, who’s raiding the fridge at night). You can tell who’s in the frame if you know them personally, but identifying a thief and getting a photo of them would be difficult—especially if they take the camera with them. :)
14. Correction: Sricam has software for computers.
In general, the cameras and their software are quite similar in some respects, which is hardly surprising: not only are they built on the same platform, but their circuit designs are also almost identical. For example, both cameras use the same image sensor; the only difference is the lens. There are also minor differences in dimensions, IR illumination, and so on.
They even record in the same format—and not only that, the surveillance software for one camera can play back footage from the other camera’s memory card :)
So overall, both cameras work about the same, but I wouldn’t buy the ESCAM because of its poor sound, the extraneous noise when connecting to the camera, and less convenient controls. Though in my case, neither camera was right for me.
By the way, a similar approach was used in one of the cameras from the well-known company Axis. It used a sensor with a relatively high resolution, but only a small part of the full frame was displayed. This was all implemented as a PTZ function, but in software. At the time, it turned out that they could make the sensor, but not an inexpensive processor to handle it. Though “Axis” and “inexpensive” don’t exactly go together.
That’s all. I hope you found the review useful.
$29.93 + $26.87
This page was found when searching for:
камера потолочные escam плоскся, q8 escam, gm8126sf-qc datasheet, gm8 135s oc на какие камеры устанавливаются, руководство камеры yoosee на английском языке, grain gm8125el, escam q8, gm8 135s oc, gm8 135s-oc, https://www.kirich.blog/obzory/videonablyudenie/912-setevye-kamery-escam-q8-i-sricam-sp022-takie-raznye-i-takie-odinakovye, china ip camera cpu gm8135s, 2, сеть занята попробуйте позже yoosee 3010200е, gm8 135 oc, gm8 125tf qc, gm8 125tf-qc, gm8135s qc камера
камера потолочные escam плоскся, q8 escam, gm8126sf-qc datasheet, gm8 135s oc на какие камеры устанавливаются, руководство камеры yoosee на английском языке, grain gm8125el, escam q8, gm8 135s oc, gm8 135s-oc, https://www.kirich.blog/obzory/videonablyudenie/912-setevye-kamery-escam-q8-i-sricam-sp022-takie-raznye-i-takie-odinakovye, china ip camera cpu gm8135s, 2, сеть занята попробуйте позже yoosee 3010200е, gm8 135 oc, gm8 125tf qc, gm8 125tf-qc, gm8135s qc камера
Questions and answers
How do the ESCAM Q8 and Sricam SP022 differ?
They have different dimensions, lenses, and IR illumination, but share a platform and the same image sensor. The author says they also record in the same format.
Why did the ESCAM Q8 not suit the author?
The author reports poor audio, unwanted noise when connecting to the camera, and less convenient controls. In the end, neither camera worked for the intended surveillance setup.
Can you view recordings from one camera on the other?
Yes. The author says the software for one camera can play the archive from the other camera’s memory card.
Discounted products
You may be interested in
Discounted products
Support the project
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forumOnly registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister

