/       /       /       /    Various and Possibly Useful AliExpress Finds for the 11.11 Sale
Support the project on Patreon


Various and Possibly Useful AliExpress Finds for the 11.11 Sale

The traditional 11.11 sale is coming up, so I decided to put together a bunch of links to products I came across over the year since the last sale. Some are products I bought or am buying myself, or added to my cart but never got around to ordering, while others are simply things I thought might be useful or interesting.

To keep up with new posts on the blog, I recommend following me on Instagram. I’ll post notifications about every new post there, and might also share something interesting from time to time - link to my account

You can also subscribe to updates and new articles on the Telegram channel - https://t.me/KirichBlog



This is already the 17th roundup, but I still recommend checking out the earlier ones, as they may also have some interesting products.
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part 8
Part 9
Part 10
Part 11
Part 12
Part 13
Part 14
Part 15
Part 16

Don't forget the roundup articles where I shared recommendations for choosing various devices:
DC-DC converters: differences and how to choose the right one
How to choose an IR soldering station
LCR meter: what it is and what it's for
How to choose an adjustable converter
UPSs and inverters
power banks


I came across this converter while searching for a phone charger for a OnePlus. Someone wanted a modified version of my power bank. As it turned out, though, they were interested not only in the SuperVooc 65W output, but also the input, so the discussion was closed. Still, I found a converter that might be useful to someone. Keep in mind, though, that it only steps the voltage down and only works on the output side - link



As I understand it, this is something similar, since it showed up in the recommendations for the previous item - link



I bought this converter by chance, but it turned out to be just what I needed: someone had ordered a tricky power bank from me with a 56 W PD output, and this turned out to be a very interesting converter that I used - link
I ordered the second link later. It's basically the same thing, but noticeably cheaper - link.


A similar converter. I ordered it, but never got around to trying it. I assume it works the same way, although for some reason it's much more expensive - link



One more converter, mostly as an afterthought; it was just sitting in my cart - link


Power supplies: 12 V 2 A and 24 V 1 A. Their actual output is of course lower, around 12–15 W, but they're very reliable. I buy a lot of them - link
By the way, I reviewed one of these power supplies; it's been running in a device for about 8–10 years now.


Unlike the previous one, this is a branded Sanmim unit. I reviewed it too, and they work great. Highly recommended; its actual output is even higher than specified - link.


And some larger power supplies. I like these too, although I have less experience with them. They can handle a fairly substantial output current surge - link.



A UPS board that's really quite good. I reviewed it and recommend it. There's now a new version with polymer capacitors, which I recommend as well - link.



By the way, I have the 200 W version of this UPS at home. Thanks to the reader who gave it to me! I still haven't gotten around to reviewing it; it also has polymer capacitors.
Basically, it's two 100 W UPS units built onto one board with a single charger. As far as I understand, the channels can be combined, but I still need to look into that - link




12–220 V inverter. I'm often asked what reasonably affordable options are available that are still decent quality. I have almost no data on the others, but I can tell you about TataliKen. The circuit design is quite good, but the build quality is lacking, so after buying one, I strongly recommend taking it apart and at least checking the soldering and assembly.
For a while, I sold their inverters: I'd buy them, take them apart, inspect everything, fix them up, make a few improvements, and sell them. Eventually I got tired of it. Over a year and a half, only one failed, and even then it wasn't clear whether the inverter or the user was at fault. People still call and message me asking if they can buy one, but unfortunately I just don't have time for them. These were the "1600" W models.
In the spring, I bought myself the 3000 W model. Everything I've said above applies to it too: the circuit design is fine, but the assembly is so-so. Interestingly, there's a red 4000 W model for sale, but judging by the photos in the reviews, it's identical inside to the 3000 W model, yet costs more - link.




This is what the 3000 W inverter looks like before and after modification. To answer the obvious question about power: the smaller one, despite being rated at 1600 W, has a real continuous output of 500 W. I tested it myself. After modification, the one in the photo has exactly twice that output.


And here's the smaller one. For the modification, I completely disassembled it, checked all the soldering and other shortcomings and defects, reinforced the power traces, tidied up the wires, added a second fan speed so it wouldn't be so noisy under light load, replaced the load wires, then put everything back together and tested it under load. Maybe that's why none of the ones I sold ever failed.



RD6030 adjustable converter. I reviewed it a while ago, and it's been my main one ever since. From my experience using it, I can say it's great—you should get one. I'm 100% satisfied - link.
You can also find a suitable power supply with an enclosure from the same seller.



And this is a new product. Although it's only indirectly related to power supplies, I can't help mentioning it: silicone covers for RuiDeng enclosures. They're quite interesting, though not cheap.
I don't know if they'll fit the smaller enclosures or how they'll look, but I'm thinking of getting one for the large enclosure - link



And of course, I'll mention the compact RK6006 converter again. I reviewed it, and I really liked it at the time. I later gave it to a friend, and as far as I can tell, he uses it from time to time and is happy with it too.
Overall, I recommend buying one - link



I've had a powerful, inexpensive converter sitting at home since around spring. I bought it to build a combined battery tester using a DL24EW board, a power supply, and the converter as a charger. But somehow I haven't found the time to put it together, even though I've already built a similar device based on the RK6006. Hard to say—I haven't tried it yet, but other people's reviews are quite positive - link.




And this is the power supply I also bought for that battery tester. I reviewed a very similar one, but an older version. The new one has some clear improvements: at the very least, the build quality is better, and it has thermal protection on both the transistor heatsink and the output diode heatsink - link.
I bought it from the link above, but first, the photos show the old version; second, the 60 V version is currently unavailable; and third, the price is just ridiculous. I think I paid around 16 bucks for mine. Anyway, I'll try to find the same one I bought from a more reasonable seller. If you look for one yourself, check the review photos—the heatsinks should have thermostats installed.



This one has a reasonable price and lots of sales, but it's the old version of the power supply, and it's limited to 48 V - link

Here's what the new version of the power supply looks like. I regret buying just one.


Below is an example of a battery tester built as an RK6006+DL24EW setup. I'd like to build one like it, but with a 300 W power supply, current up to 20 A, and possibly an option to use the power supply independently of the load. What do you think—is it worth making one?



A good, versatile converter, i.e. can both step down and step up, so it can be used to get 12 V in low-voltage UPS units - link.



I came across this board completely by chance. It looks pretty good, but I've heard it tends to overheat. I think it should work fine at power levels up to 100 W, though - link



I bought this charger completely by chance, but ended up putting it away somewhere and now I can't find it. I picked it as a high-current option for charging a high-capacity 1S battery - link



Speaking of chargers—or, more precisely, dischargers :)
A while ago, during a bout of online shopping, I bought a four-channel battery capacity tester. There's also a two-channel version, but I only recently got around to unpacking mine - product link.
But not long ago I saw an eight-channel version in some YouTube video, and then on AliExpress. People are actively using them to test large numbers of batteries, which, while only indirect evidence, does suggest they're reasonably good quality - link



And of course, my favorite electronic load, which I mainly use for battery testing. I've tested almost everything this company makes, but the only version I can confidently recommend is the DL24MP - link
By the way, Atorch and Heydance are one and the same. But when I recently bought one from Heydance, the cable connecting the board to the control module was better, and it had transistors better suited to the load. So it's better to buy from the link above; you're more likely to get a better unit there (they may send either the regular or the updated version).
Yes, there's also the DL24EW and CL24, but the first has awkward controls and a few issues, while the second has far fewer issues and somewhat better controls, but its power is only 150 W. The only useful feature they have is charge control. The included boards are complete garbage, though; if you need a decent one, get in touch and we'll figure something out.



If you need to work with batteries at a somewhat more professional level, I recommend getting something from ZKEtech, for example, the EBC-A10H, EBC-A20 - or the EBC-A40L

A reminder: don't confuse the EBD and EBC series loads. The former is just an electronic load; the latter is a battery tester, meaning it can also charge batteries, including in automatic mode.
There are also occasional quirks. For example, this company has an EBD-B30H load (some of our sellers sometimes call it an EBC, which is incorrect). It's rated for 30 A, but there's a catch: at 12 V it can deliver a maximum of 10 A; at 24 V, 20 A; and it only delivers 30 A at 30 V and above. That's because some of the heat is dissipated by resistors.
Also, it can deliver 30 A only up to 72 V; above that, you have to reduce the current. The maximum voltage is 89 V.

So if you have any questions, it's best to check or consult someone who knows these devices.




And if we're talking about chargers and testers, it makes sense to talk about batteries too. AliExpress and batteries usually aren't a great combination, though there are exceptions.

First, I'm genuinely interested in the new sodium-ion batteries, especially for specialized applications where you need both high discharge current and a wide operating temperature range. The low price is a bonus. Anyway, I'm thinking of buying a few to test. They come in 1300 and 1500 mAh capacities; I'm planning to get the 1500 mAh ones. What do you think?
Link to the batteries.



Second, let me remind you again about the decent Tpcell batteries. They're definitely worth a look: they're made either with branded cells or with quite good Chinese ones, and the prices are reasonable. I've reviewed them several times already - link.

I can't think of anything else interesting to say about batteries from AliExpress for now. If you have any tried-and-tested options, post the links. Alternatively, you could browse through my Vapcell battery reviews, but the prices there are relatively high, so you might as well go with Nkon.



People sometimes ask me about hybrid inverters. It's hard for me to say anything specific, but a friend bought a DAXTROMN this summer. It seems to work, but it did freeze up strangely at least once. That never happened with his previous Axioma, which ran for over two years. Otherwise, it's fine - link.



There's also the popular PowMr (where do they come up with these names?), which seems to me to be basically the same thing - link



I'm often asked how to determine the state of charge of a lithium iron phosphate battery. With ordinary meters that track voltage, there's no way to do it. That's a given, due to the discharge curve of these batteries.
If you want to know your battery's state of charge, you should use a coulomb meter. They're more expensive, but they work correctly. Enter your battery's capacity in the settings, and the meter will track how much energy has gone into charging and how much has gone to the load, then display the correct readings.

I found two options, at least among the popular ones: for example, option one and option two.



A little more about measurements. First, a popular impedance meter - link



Second, a similar meter from Fnirsi. I use it often, but to be fair, it has a few rough edges. I can tell something's a bit off about it, but I still use it because it's convenient - link



A versatile instrument, a multimeter. I think I even have a review of it somewhere. If it's on sale, it's worth buying; it'll come in handy - link




An interesting and quite inexpensive multimeter. I would have passed it by if not for one detail: it can also measure inductance, something you almost never see in meters like this. Highly recommended - link



More converters. Someone will of course ask, what's unusual about these? The relatively unusual thing is that they're isolated. They output 12 V when powered by 50-90 V or 24-72 V. In short, they're worth a look: the first and the second.




I came across this item by chance: a power supply with adjustable current. I think it could be used as a high-power charger, and it's reasonably priced too - link.



And these are quite interesting little gadgets. There are so-called PD triggers that can tell a power supply to output the required voltage. But this is the reverse version: you can connect a regular power supply (with the required voltage) to this adapter, and it will output that voltage over Type-C while also sending the appropriate command via the PD protocol.
In other words, you can charge a power bank with a PD input from a regular power supply, such as a laptop power supply, or any supply with a suitable voltage and power rating.
I bought one of these, in cable form, but there’s also a simple adapter version.



And speaking of chargers, if you need to charge high-capacity batteries, you could look at modified server power supplies. I suspect they’ll be noisy, though, so I wouldn’t put one in the bedroom :)
A couple of options: the first and the second.



I mentioned electronic loads above, and here’s a decent-looking module I came across: up to 60 A and 500 W. It’s made by Maxgeek, but looks a lot like the Sousim modules I reviewed a while back — link




A little useful gadget: a capacitive sensor. You can mount it behind the front panel and make an original-looking “power button” :)
Product link




A really handy thing: an isolated UART-to-USB converter, already built as a rear-panel bracket and with a Type-C connector — link



A decent drill driver. Not a Milwaukee, of course, but it’s compact, powerful, and has a brushless motor. The only thing is, I messed up and bought the version with one battery, hoping it would fit the one from my old, similar-looking drill, but no luck :(
Product link.



SH72 tips. I’ve been using this non-genuine, inexpensive one for almost a year, and it’s proven more than reliable. At least, I haven’t managed to kill it after a year of heavy use. My only gripe is that the tip is ground a little crooked, slightly asymmetrical, but it doesn’t get in the way — link.
I also bought the genuine one and used it for a year, but then just put it aside and switched to something cheaper — link.



Very good DC-DC converters with a fixed output voltage. Highly recommended. They’re called Mini560 Pro and work much better than the regular Mini560 — link



A relatively new ammeter-voltmeter model from Atorch. I bought it for an electronic load and hope to try it out soon. It’s a big improvement over the old version. Recommended — link



Some kind of AC ammeter-voltmeter, also from Atorch. They’ve packed it with features; now all that’s left is to “get this thing off the ground.”
Seriously, though, it’s a pretty good idea overall, but I wouldn’t count on it switching the claimed 100 A — link.



The “getting off the ground” situation here isn’t much different, but this is a sort of universal, configurable charger, possibly even with the option to use a battery, though I haven’t looked into that. I’ll note that it uses fairly high-quality components, so it might have a chance — link



A pretty good power bank board. Maybe I’ll finally find the time to go through the footage I’ve shot and show how to build a proper power bank with this board — link.



I often hear complaints that an inverter or UPS with a 50 Hz transformer draws a lot of power when running with no load. Sometimes, adding an inductor in series with its primary winding helps, though first check whether there’s already an inductor there. If you don't have an inductor, you can find one here, or wind one yourself, although honestly, it's usually easier to buy one - link.



These are decent BMS boards. And a quick recommendation: if you need 100 A, don't get a 500 A board "just in case"—get one rated only a little higher, otherwise your protection won't work properly - link
This board is much more sophisticated, for relatively specialized applications - link


A set of 5 pairs of connectors with covers, free shipping - link


Nice little displays - link


This is a rather unusual instrument: an MPPT parameter meter. I haven't looked into it, but I assume it could be useful to solar installation technicians - link
I might buy one for my collection, but I don't even know what I'd use it for, since I don't work with systems like these. By the way, the seller seems to have raised the price; I understand the typical price is around 35–40


A nice thermometer + hygrometer with phone access - link


Battery holders for YR1030+/YR1035+ and RC3563 series impedance meters - link


More BMS boards. They're relatively inexpensive, but only for modest currents. In my opinion, they're better made than the cheap "white" boards - link


Capacitive active balancers are extremely important for battery packs. I'd recommend getting capacitive ones rather than transformer-based ones; lately I've been seeing some negative reports about the latter - link



A DC UPS module from Mean Well. It doesn't have its own power supply, but as I understand it, you connect it in parallel with the output of the main power supply. It can charge a battery at 2 A and switch currents up to 20 or 40 A, depending on the model. In any case, it's best to read the manual before buying. Product link





That's all for now. I may add something else later, but I really welcome links to products you've bought yourself and can recommend (or, conversely, ones that are best avoided).
This page was found when searching for:
https://www.kirich.blog/magaziny/aliexpress/interesnye-tovary-na-aliexpress/1250-raznye-i-vozmozhno-poleznye-tovary-s-aliekspress

Questions and answers

What products are featured in the AliExpress 11.11 roundup?

It includes converters, power supplies, inverters, UPS and BMS boards, active balancers, connectors, a thermometer-hygrometer, and test equipment.

What continuous power did the author measure from the “1600” W inverter?

The author measured 500 W of continuous power. He recommends opening the inverter to check its soldering and assembly before use.

What does the author recommend when choosing a 100 A BMS board?

He advises against buying a 500 A board “for extra margin,” warning that the protection may not work correctly. Instead, choose a board with only a modest current margin.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments12

Comments are published in their original language.

  1. 10 November 2024 05:06#1
    mini560 pro не синхронный в отличие от обычного mini560, диод на нем греется как утюг, не может он быть лучше.
    Мосфеты на плате ip2366 грелись до 105 градусов при зарядке 6s 100Вт, 140Вт давать не рискнул, нужен обдув или дополнительный радиатор.
    За силиконовые накладки на райден спасибо.
    +2
    1. 10 November 2024 11:46#2
      С мини560 есть нюанс. по КПД ду, обычный выиграет, но у меня один знакомый столкнулся с проблемой, надо было питать банальную нагрузку, роутер и обычный мини560 уходил в защиту буквально от каждого чиха, пытались побороть, не получилось. В итоге заменили на 560про, проблему как рукой сняло.  Плюс я 560про иногда использую с относительно тяжелыми нагрузками, которые на старте прилично кушают, также без проблем.

      Правда я допускаю что человеку попались какие-то подделки, надо самому сравнить.

      По плате да, я об этом писал, реально до 100ватт, выше лучше разве что кратковременно.

      0
  2. 10 November 2024 13:06#3
    Спасибо большое за подбор полезных штуковин. Хотел спросить, может вы сможете что-то посоветовать: с приходом Холодов соседи начали что-то включать в сеть и трансформатор у моего низкочастотного инвертора переодически начинает гудеть как трансформаторная будка. Не вредят ли такие помехи по сети трансформатору? Может можно купить какой-то фильтр в разрыв 220 и отселить эти помехи? Искал у вас на сайте обзор чего-то подобного но ничего не нашел
    +1
    1. 10 November 2024 14:06#4
      Предположу что у ваших соседей стоит что-то мощное, обогревающее, но включенное через диод, который портит синусоиду, в итоге трансформаторы начинают гудеть. ТАкое бывает еще и когда сеть слабая.
      А с напряжением все нормально?
      0
      1. 10 November 2024 15:32#5
        Та кто их разберет что они в розетку пихают :) Но скорее все таки да, обогреватель какой-то, бо началось это все с приходом холодов и повторяется в основном перед уходом на работу и по приходу с работы, днем транформатор почти не гудит.
        С напряжением все вроде более менее нормально, 215-232в. Пару раз видел просалдки в вечернее время до 210-208в
        0
      2. 11 November 2024 15:02#6
        А подскажите пожалуйста, когда из-за таких вот "обогревателей" начинает гудеть транформатор, это для него плохо?
        0
        1. 19 November 2024 11:55#7
          Не то чтобы вот совсем плохо, но и хорошего мало, потому как у вас будет повышенный нагрев трансформатора из-за несинусоидального тока, соответственно больше потери, зависит от того, насколько сильно нагружен трансформатор относительно его номинальной мощности.
          0
  3. 10 November 2024 18:23#8
    Спасибо. Очень много знакомых вещей. По поводу XY 6020 L.
    Прикладываю фото оперативной переделки самодельного ЛБП, сборки 1994 года. Собран был из мусора от станции МА9-МКТМ, на базе ЕС-ЭВМ.
    Выжал из трансформатора все его 150 ватт. Оттестировал. Заряжает LiFePo4 4S током 11 А без проблем. Для чего собственно и собирался.
    --------
     

     

    А вот с инвертором 12 в 2000/1600 ватт POW-HVM2H-12V-N не повезло. Шел 30 дней. При включении, после тестирования, через 7 секунд уходил в защиту и вырубался. Неделю-другую переписывался с продавцом, время реакции ровно 24 часа, кроме выходных. Выслал новые потроха. Сначала хотел за 40 долларов выслать, постом снизил до 20. еще неделю будет идти. Локально отдал инвертор в ремонт, там заменили все силовые элементы и сказали, что ждут 10 дней посылку с запчастями. Я так понял, помер контроллер. Еще 3900 гривен в минус. Так вот и сижу, без инвертора.
    +2
    1. 10 November 2024 20:25#9
      Ну а что, прям стиль стимпанк получился, по своему даже прикольно :)
      0
      1. 10 November 2024 23:27#10
        Так, даже жалко его было курочить. У меня таких два, старый собран с корпуса от самописца. основная функция была, блок питания для паяльника на 12 вольт. Той шо слева, на П216 регулируемый, до 1 А. Той шо разобрал, уже собран на трех линейных стабилизаторах, на 5, 9 и 12 вольт. И регулируемая часть на "кренке", потом оригинальная LM317, а когда разбирал, то нашел там что то новое, по даташиту уже на 5А.  
        0
  4. 10 November 2024 23:52#11
    А сам "XY 6020 L" после "RK6006" мне не очень понравился. Я не стал ставить выключатель в выходную цепь. Включается экран от батарейки, что подключается ему в нагрузку, до подачи питания на трансформатор. При подключении батареи проскакивает искра на крокодилах. Сбрасывает показания отданных Ач и Втч при останове заряда и последуещем повтороном пуске. Если подключить баратею, что свинец на 0.8А, что лифер на 10А, стартует как то с натугой. То есть ток, то нету. Минуту показания скачут от нуля до выставленного мамксимума. Потом он успакаивается и как то работает, показывая ток нормально. Но за 800 гривен обещали 20А, а у RK6006 только 6А. Тому мирюсь с таким поведением.
    0
    1. 19 November 2024 11:56#12
      Планирую собрать нагрузку на базе 24EW с этим преобразователем чтобы сделать именно тестер батарей, поиграюсь, посмотрю как он себя ведет. Кстати плохой вариант сначала подключить батарею, а потом питание.
      +1

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister