How to Choose an Adjustable Converter
As usual, a reminder: to keep up with new posts on the blog, I recommend following me on Instagram. I’ll post notifications about every new topic there, and might also write about something interesting from time to time - link to my account
Of course, if you have enough money, you can simply buy something from Rigol, ITECH, UNI-T, Siglent, or similar brands. But these are often not only expensive, but sometimes more than you need—especially for home use or when you're a beginner radio amateur on a tight budget.
First, it's worth understanding the different power supply topologies. This will help you avoid making the wrong choice.
1. Linear. A linear regulator is used as the control element.
Advantages: fast response to load changes, low output capacitance, and almost no output ripple.
Disadvantages: high heat dissipation and relatively low output power. Since these supplies usually use a 50 Hz transformer, they are also heavier and therefore more expensive.
2. Switching. A regulated switching power supply or voltage converter with PWM control.
Advantages: a good power/size/price ratio and high efficiency. These power supplies are also evolving rapidly, so it's easy to find sophisticated programmable models.
Disadvantages: higher levels of high-frequency ripple and a large output capacitor, which can result in a current surge when certain loads are connected.
3. Hybrid. The main regulation is handled by a switching circuit, with a linear regulator at the output. The circuit is designed so that the voltage at the switching converter's output is always slightly (1–3 V) higher than at the linear regulator's output.
Advantages: efficiency is only slightly lower than that of switching supplies, while ripple levels and response speed are almost as good as those of linear supplies.
Disadvantages: greater circuit complexity and, consequently, higher cost, which limits the popularity of these power supplies.
We'll set linear and hybrid supplies aside for now. Today, we're looking at switching supplies. There's a huge range to choose from, and you can either build almost everything yourself or buy an almost-ready unit that just needs to be installed in an enclosure.
Let's start with the simplest options.
Some voltage converter boards have one, two, or three adjustment controls. Usually, a single control adjusts the voltage; with two, there's also a current adjustment.
The first converter is very popular with beginner radio amateurs and doesn't cost much. You can extend the trimmer potentiometers with wires. Add an ammeter-voltmeter and a power supply, and you'll have a simple adjustable source for testing various DIY projects, with load current up to 8–10 A.
If you use a board based on the LTC3780, you can get the same thing, but with a wider choice of power supplies, since the converter is universal.
Some manufacturers offer converters with an external potentiometer, while others have models with a built-in current and voltage display. All you need to do is find a suitable power supply and some kind of enclosure.

Here are a couple of more interesting models. The ZK-SJVA-4X simply adds a display, while adjustment is still done with trimmer potentiometers. The model shown on the right is more interesting.
The D3806 has fully digital controls, and another important feature: the display and button board is removable, so you can easily mount it on the front panel of your future power supply. It's also a step-up/step-down converter. Perhaps its only significant drawback is that you can't see the current and voltage readings at the same time.
Now's a good time to explain the difference between the control methods:
Analog - using potentiometers. To set the current, you first need to short the output terminals, set the required maximum current, and only then connect the load.
Digital - using buttons or an encoder. You can set the voltage and maximum current while the power supply output is disabled, which is much more convenient in most situations.

The next step up is converters with more features, which have become very popular lately. They're often made with a universal input, so, for example, you can use a 19 V laptop power supply and get anything from 5 to 35 V at the output. Unfortunately, though, SEPIC converters can have high ripple, so measures to suppress it are recommended. For non-critical loads, however, they work just fine.
One well-known example is the XYS3580, with an output voltage of up to 36 V, current up to 5 A, and power up to 80 W.
Products from the young company Fnirsi, which makes compact converters, are also very popular in this segment.
DC-580 has similar specs to the XYS3580, except its minimum voltage is 1.8 V rather than 0.6 V. Models like these usually come in standard sizes, so if you want, it's easy to upgrade to a more powerful model without replacing the device's front panel.
There are also converters designed to be used without an enclosure.
What they have in common isn't similar specs, universal input power, or a standard enclosure, but a greatly expanded feature set beyond simple current and voltage adjustment. For example, they can measure output power and delivered capacity, rotate the screen image, set the protection trip threshold, and much more.

There are also some less well-known models among the popular converters—perhaps even unfairly overlooked, despite being convenient and reliable in use:
DPX6012S from YIYIELECTRONIC, rated for 60 V and 12 A. There are also 60 V 5 A and 32 V 3 A versions; the S suffix indicates PC control. I even have a review of this converter.
The ZXY-6005S from MingHe is rated for 60 V and 5 A. As with the DPX converters, there are three models, all rated for 60 V, with current ratings of 5, 10, and 20 A. And, just like with the DPX, the S suffix means computer control is supported. I reviewed this one too, more than 8 years ago—how time flies! By the way, it's still in active use. I also reviewed the 6022 version.

Without exaggeration, the best-known manufacturer of adjustable converters is RDtech. The company makes a wide range of models and is constantly releasing new ones. What's more, it's clear that the developers try to take users' feedback into account and also offer firmware updates for their devices.
There's no point discussing the first models, which were more like practice runs for the manufacturer. The later ones, though, are worth a detailed look—especially since they're well worth it.
The DPS and DPH series converters include three main models and several variants:
DPS3005, DPS5005, and DPS8005 are compact—ultra-compact, really—step-down converters with output current up to 5 A and voltage ratings of 30, 50, and 80 V, respectively. Since there's little difference in price, the DPS8005 is the most interesting option. I also wrote a review of it.
DPS3012, DPS5015, and DPS5020 are step-down converters with output currents of 12, 15, and 20 A, and voltage ratings of 30 and 50 V, respectively. The first model is considered obsolete, while the second costs almost as much as the third, so once again it makes sense to go for the top model, the DPS5020. I covered this board in a review and liked it.
DPH3205 and DPH5005 are step-up/step-down converters with an output current of 5 A and voltage ratings of 32 and 50 V. These models aren't very powerful, but they make it easier to choose a suitable power supply. Keep in mind, though, that to get full power, you'll need a 19–20 V power supply for the first model and a 30–32 V one for the second. Review of the 5005 version was one I did; it’s a very interesting board, but its range of applications is noticeably narrower than the others.

Despite the wide variety of models, they have a lot in common:
Front panel module size
Control interface and settings selection
Thermal protection and current/voltage/power limiting modes
USB or Bluetooth connectivity (optional)
A single program for control from a PC or smartphone
The program lets you do more than just control the converter and plot graphs; you can also set up simple operating sequences, such as automatically increasing the voltage or current in steps.

But the real breakthrough came with the release of the RD60xx series of step-down converters. It currently includes four “standard” models: RD6006, RD6012, RD6018 and RD6024. They all have an output voltage of up to 60 V, with current ratings of 6, 12, 18 and 24 A, respectively. There are also two models in the Pro line, RD6006P and RD6012P, which offer higher accuracy when measuring and setting parameters. And perhaps most importantly, they’re hybrid! A hybrid converter combines switching and linear regulation, so it has efficiency close to that of a switching converter and dynamic performance like a linear one.
All the units can connect to a computer via USB. Models with a W suffix come with a WiFi module, and you can also buy an adapter for connecting via the industrial RS485 interface.
I won’t link to reviews of every model; I’ve had all six here, so I’ll link to my review of the RD6024, the last model in the series. At the beginning of that review, I linked to reviews of all the devices from this manufacturer. I recommend it.
Once again, the manufacturer avoided multiplying case designs and released all the models not only in the same design and size, but with the same control layout as well.

The case is, of course, noticeably larger than the previous series, but the display is much bigger, and you can now directly select the current and voltage values.
All models in this series also have a rather unusual battery-charging function, with protection against reverse polarity. Unlike ordinary laboratory power supplies, connecting a battery to a dedicated terminal activates charging mode, which shuts off completely when the current drops to 10 mA on the RD6006 or 100 mA on the RD6012 and RD6018.

But RDTech went a step further and lets you buy not just the converter itself, but a case for it too.
There are four case options in total: two for the DPS/DPH line, which differ slightly, and two for the RD60xx line, which differ in size. With a case, you can put together a fairly high-quality programmable laboratory power supply literally “from building blocks.”

Juntek deserves a special mention. It also makes a whole series of voltage converters with different specifications. The overall concept is familiar, but there are some significant differences.
The thing is, popular models are generally limited to 60 V. One partial exception is probably the DPS8005, which goes up to 80 V, and the ZXY60xx series, which has 60 in the model name but actually outputs 62 V. There was also the ZXY12010, rated for 120 V and 10 A, but it seems nobody has ever seen one in person, and probably never will now. A shame—they’re good converters.
Juntek’s product range includes these models:
DPM8605, 8608, 8616, 8624 and 8650, all with an output voltage of 60 V and current ratings of 5, 8, 16, 24 and 50 A, respectively.
DPH8909 and DPH8920, with voltage up to 96 V and current ratings of 9 and 20 A, respectively.
As you can see, the DPM line stands out for its 24 A and 50 A models, while the DPH series offers output voltage up to 96 V.
The converters look extremely austere: a few buttons, a couple of seven-segment displays and four LEDs. All the models share the same design, with only a small difference in the fan’s location.

But since we live in the computer age, the manufacturer decided not to “go against the grain,” and all the converters can connect to a PC. Models without a suffix have only a TTL port; models with the 485 suffix have an RS485 port, while RF indicates that an external panel with a large display, buttons, an encoder, and wireless connectivity is included.

It might seem that this is all there is to choose from, but that’s not the case. Sometimes it feels like if you started listing every adjustable converter on the market, a couple of new models would come out before you reached the end of the list.
For example, there’s also a compact but outdated converter based on the XL4005E1, with a pair of displays and current and voltage adjustment.
There’s also the old but interesting DP30V5A-L from RDtech. Its specs are nothing special, but the removable displays are an unusual touch.
And how could I not mention the entirely separate series of various adjustable SEPIC converters powered by USB, with QC support to boot, such as the ZK-DP2F. This converter can regulate voltage and limit current—in essence, it’s a “lab power supply in your pocket.”
And of course, there are two more interesting models from Juntek: the fairly powerful step-up converter B900W, with current up to 15 A, and the compact step-down converter B3603. Like the D3806 shown earlier, both have a removable board with a display and buttons.

What you need to know and keep in mind when choosing an adjustable converter.
Inside, it’s just an ordinary converter, with all the usual quirks and caveats. They come in step-down, step-up, and universal versions, though step-down models are much more common.
Also keep in mind that step-down converters need about 4–5 V of headroom in the input voltage, while step-up and universal models can deliver full power only when the input voltage is above a certain threshold.
When choosing one, you should also decide on the following parameters:
1. Output voltage range. On basic models, the minimum is often not zero but 0.5–1.5 V; the maximum is often 30–35 or 60 V, and less commonly 50 or 80 V. A 35 V maximum is enough for most applications, but if the price difference is small, it’s better to go for 50–60 V.
2. Output current. This depends on how you plan to use it. 5–6 A is usually enough; sometimes you need 10–12 A, while higher currents are needed much less often.
3. Maximum power. This is usually limited by the power supply feeding the converter, so if you already have one, you can use its specs as a guide. For step-down converters, it’s simple: their output current can’t exceed the input current, and you should allow at least 10% headroom in voltage. Some models, such as the RD6018, let you set a maximum power limit. That means even with a low-power supply, you can get the full output current—or the full voltage—but in either case, power won’t exceed the set limit.
4. Display. A large display is nice, but for occasional use, a standard seven-segment display will do. If you plan to use it often, though, it’s better to get one with a full display. The main thing is that it’s easy to read and responsive.
5. Additional features. It depends on what you need: some people want trigger protection, while others need the ability to charge batteries with automatic shutoff afterward.
6. PC connectivity. As with the previous point, it depends on your needs, but experience shows that the ergonomics of the onboard controls matter more, since you’ll use them much more often.
That’s it. Now choose the model that suits you, and remember: it’s best to “feed” your devices good “food.”
dc 580 обзор, zk-sjva-4x тестирование, https://www.kirich.blog/stati/informaciya-dlya-nachinayuschih/1117-kak-vybrat-reguliruemyy-preobrazovatel, регулируемый инвертор, rd6006 разница rd6024, какой потенциометр выбрать для регулировки до 30 вольт
Questions and answers
How do linear, switching, and hybrid power supplies differ?
Linear units respond quickly and have low output ripple, but produce more heat and usually offer less output power. Switching units are compact and efficient but may have more high-frequency ripple; hybrids combine switching regulation with a linear output regulator.
What voltage and current range should I choose for an adjustable converter?
The author says 35 V maximum and 5–6 A are enough for most tasks. If the price difference is small, consider a range up to 50–60 V; 10–12 A is sometimes needed, while higher current is less common.
Why is digital control more convenient than analog control?
With digital controls, voltage and maximum current can be set using buttons or an encoder while the output is inactive. For analog current adjustment, first short the terminals and set the limit, then connect the load.
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments1
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister




Comments are published in their original language.