A display for a Start-7231 clock, or a post about nostalgia
As is usually the case with devices that use VFDs (Vacuum Fluorescent Displays), the phosphor gradually burned out, and the display became rather dim.
You can find these displays on various OLX, Avito, and similar sites, of course. That's exactly what I did.
First I contacted one seller who had listings for both working displays and ones with minor defects, but they never replied. They were asking 80 UAH each (about 3 dollars).
After looking around some more, I came across a second seller. Their price was lower, 50 UAH (a little under two dollars). I wrote to say I wanted to buy two and have them sent from Mykolaiv to Kharkiv cash on delivery, but the woman selling them (or so I thought) replied that she wouldn't ship without prepayment. Given how many scammers there have been lately, I told her I only buy cash on delivery, with no prepayment.
A few days later I called her back, and in the end she gave me the phone number of someone else, who I was able to arrange the shipment of a pair of indicators with without any trouble. It reminded me of that old line: “Are you selling a Slavic wardrobe?” :)
The guy turned out to be very friendly and easy to talk to. He was a little disappointed that I only wanted to buy a pair, but I told him I didn't really need any more. He also offered me the ICs for these clocks. I even considered buying them, but then I thought it through: buy the display, buy the IC, then I'll want to make a circuit board, then come up with an enclosure... and I changed my mind. I just couldn't be bothered.
Anyway, a few days later I picked up my little parcel at a Nova Poshta branch and was “pleasantly” surprised to find that shipping two indicators had cost me 70 UAH! Of that, 48 UAH was shipping and 22 UAH was the cash-on-delivery fee. Their minimum fee for cash on delivery is 20 UAH, and the other 2 UAH is the 2% transfer fee.
A few days later I picked up a parcel of transformers weighing about 10–11 kg. Shipping that parcel cost 88 UAH. How does that make any sense?
Anyway, I digress. I picked up a little box at the post office, with two indicators packed neatly inside. Five stars for that—you can tell the guy took care when packing them :)

And here are the two beauties, in perfect condition on the outside.

Yes, those very ones, “from my childhood.”

To be fair, the Start-7176 kits originally came with indicators without a bell, just two dots. Later, when the cased version (Start-7231) came out, they were sold with indicators that had a bell instead of the upper dot.

I know the two-dot version is more authentic, but my clock is in an enclosure, and besides, I like the other version better.
Compared with imported displays, the grids in our indicators look like they were made from thicker wire. They look kind of “clunky.”

View from below.

Manufactured in February 1993, in Ukraine.

The little box of indicators sat there for a while, and finally I got around to fixing the clock. I had considered not only replacing the display but also adding backup power, but then decided I didn't want to mess with something that already worked well, and changed my mind.

The clock's enclosure is actually pretty good, but while searching online for information about this clock, and especially its display, I came across this design on the Radiokot forum. As far as I can tell, it was a factory-made version.
Notice how the standard enclosure is simply fitted into a different outer shell.

In my version, the power supply is attached to the back of the enclosure, but if I remember correctly, it could have been made as a plug-in unit. That option didn't work for me at the time.
You can also see the photosensor on the back, which automatically adjusts the display brightness by changing the bias voltage.

Inside, though, it's pretty grim. It was assembled a long time ago, when I had little experience, and the workmanship is really rough.

On the left is a power supply regulator I added; it isn't in the original circuit. It's just a basic regulator with a resistor and Zener diodes. By the way, I put a 2200 µF capacitor in the power supply, and the stored energy is enough to keep the clock running for 10–11 seconds.
For some reason, I thought I built these in the late 1980s, but it turned out to be the early 1990s.

Interestingly, the edges of the display have turned white, and on the outside, too. But they also peel a little.

The problem with my clock was that the right side of the display had noticeably lost brightness. The defect is very strange: why only the right side, and why did the brightness drop so much?

For an experiment, I made two changes:
1. Swapped the ends of the filament wires.
2. Swapped the grids for the first and last digits.
As you can see, absolutely nothing changed.

In the end, I cut out the display to replace it with a new one. When I put the two side by side, I noticed how different they looked.


The displays were made, as they say, at the turn of an era: the new one in February 1993, the old one in July 1991, about six months before the collapse of the USSR, but technically still in "that country," which is why it has the corresponding markings.
But the actual difference between the displays is only 1.5 years, and look how much changed in that time...

The circuit board took some work. First, I had to be careful, since the clock is very precisely adjusted and still keeps excellent time.
The problem was that although the board is double-sided, it has no plated-through holes, so in places I had to dig out the remains of the display leads.
I also replaced a couple of capacitors right away. The 10 µF one measured 8 µF, while the other had dried out completely. The clock still worked fine, though, apart from the dim display.
I replaced them with a couple of used Sanyo capacitors salvaged from a branded device.

I soldered everything back in place, installed the display, switched it on, and saw that it all worked. There’s so much brightness headroom that you can still see the segments even with the flash on.

Then I put the board back, reassembled the case, and that was it. The only thing I noticed is that now:
1. I’ll need to adjust the automatic brightness control to dim it a little.
2. The right digit is slightly brighter than the left—or, more precisely, the minutes are brighter than the hours. Could that be why the least significant minute digit degraded...
You can find lots of information about the different versions of the kit here.

I was about to wrap up the post, but then I came across a photo of one of the kits I had as a kid and really liked. Sure, it wasn’t a modern "Arduino," but it was such a thrill when everything worked after you put it together. Though maybe that’s not quite right: this kit is exactly what got me more interested in radio electronics, because everything—or almost everything—I built with it worked. The circuits and instructions were very well thought out.
There were kits before it and after it, but this is the one I remember best.

That’s it for now.
Of course, you could ask: Kirich, why are you restoring this junk? There are so many modern clocks on AliExpress, with LCDs, LEDs, e-ink displays—whatever you want.
I don’t know. It just felt like throwing away something that had served me faithfully for almost 30 years would be almost like betraying a friend. I simply couldn’t bring myself to throw them away. And when I accidentally dropped them a few years ago and they stopped working—the case fell apart and a couple of wires broke—I felt sorry for them.
Maybe I’ve become sentimental, but that’s how it is. Some people might think they "don’t look the same anymore," but I still like them, even after all these years.
As for the displays: they work, and the seller is reliable. If you’re in Ukraine and need one, I recommend them. That’s all from me. I hope you have something "from your childhood" too, and feel the same way about it.
2, радиоконструктор старт 2035, часы конструктор электроника старт 7231 htvjyn, часы-будильник электронные старт 7231, часы цифровые эк 01, 3, 1, 7.102.118 изм 10, набор старт 7176 часы, ремонт и модернизация часов электроника старт 7231, часы настольные электроника старт-7231, схема часов электроника 2.021-1-3, ремонт часор старт7231, старт 7231 stl, корпус для часов старт 7231, https://www.kirich.blog/obzory/drugie-obzory/750-ekran-dlya-chasov-start-7231-ili-nostalgii-post, старт 7176 корпус, цифровые индикаторы для электронных часов, старт 7176 часы схема, часы электроника старт регулировка яркости, 7-102-118 изм электроника схема, схема часов электроника 2 08, часы на 176 серии с газоразрядными индикаторами, настройка точности хода советских электронных настольных часов, часы старт 7231 схема, экран для часов, технические обзоры, часы настольные, электронные часы
Questions and answers
Which display fits the Start-7231 clock?
The author replaced the old VFD with a display featuring a bell, made in February 1993. This version matches the Start-7231 in its case.
Why was the right digit dim on the Start-7231 clock?
The right side of the display had lost much of its brightness, but swapping the heater leads and the grids of the first and last digits made no difference. The author did not determine the exact cause.
What else did the author replace while repairing the Start-7231 clock?
Along with the display, the author replaced two capacitors: a 10 μF capacitor measured 8 μF, while the other had dried out completely. The clock worked after reassembly, but the automatic brightness control needs to be turned down slightly.
Discounted products
You may be interested in
Discounted products
All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!
Comments4
Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.
Log inRegister


Comments are published in their original language.