/       /       /    EACHLINK H6 Mini, another TV box based on the Allwinner H6
Support the project on Patreon


EACHLINK H6 Mini, another TV box based on the Allwinner H6

$39.99
Go to store
As it happens, SoCs from Allwinner are quite uncommon and are almost completely overshadowed by options from Rockchip and Amlogic. In all this time, I’ve reviewed only one TV box based on an Allwinner processor. The Zidoo H6 Pro I covered back then was actually pretty good and even had working AFR, but its price of over $80 spoiled the whole picture. Today I have another member of this family of TV boxes, but at a more affordable price—that’s what caught my interest.
A look inside, teardown, tests, conclusions, and of course, the table.


In any case, throughout this review I’ll be comparing this model with the Zidoo H6 Pro from time to time. It’s worth noting that Zidoo is at least some kind of brand, whereas I’ve never heard of EACHLINK before. Still, the two have a lot in common, so I think the comparison is fair.

First, the specifications:
CPU — AllWinner H6 Quad-core Cortex-A53
Number of cores — 4
Graphics — ARM Mali-T720 MP2
RAM — 3 GB DDR4
Flash storage — 32 GB
Wi-Fi: 2.4 GHz
Bluetooth: Bluetooth 4.1
LAN — Ethernet 10/100M
Video output — HDMI 2.0 with HDCP support
Ports: 1x USB 2.0, 1x USB 3.0, S/PDIF, RJ45, AV, microSD card
Operating system — Android 7.0 64-bit
Dimensions — 96 x 96 x 19 mm

And here are the first differences. This one has one and a half times as much RAM (3 GB) and twice the flash storage (32 GB), but they’ve “cut” 5 GHz Wi-Fi, one USB port, and gigabit Ethernet, and replaced the optical S/PDIF with a 3.5 mm jack.
I can overlook the missing S/PDIF and USB port, but it’s a shame to lose gigabit Ethernet and 5 GHz Wi-Fi.

The packaging is also a little more basic, but that’s not important.


The contents are also the same:
1. TV box
2. IR remote control
3. HDMI cable
4. Power supply
5. Manual.




But the remote is clearly more basic, despite having more buttons, and the power supply that came with the Zidoo was better, too.


One thing I’m really grateful for is that they replaced the usual power plug with MicroUSB. That means you can use a better-quality, more powerful charger (power supply), as well as a different cable—and do it all without a soldering iron or any other tinkering.
I talked about something similar in one of my videos a while ago. Looks like the Chinese developers watched it too.


Especially since the included power supply is nothing special in terms of quality—just a typical budget model. The varistor on the power supply’s input was a big surprise, especially since it’s installed before the fuse. So here’s my advice: clip it out. In a worst-case scenario, it’ll take the hit and things could end with fireworks.


The case also looks more basic. The Zidoo’s was partly metal and felt more substantial.


The dimensions are comparable, though; the Zidoo is slightly larger.


On the plus side, they added a display on the front showing the time and status indicators for key functions, such as Wi-Fi activity and connected USB drives.


As I mentioned above, there’s one fewer USB port: one of the USB 2.0 ports has been removed, and S/PDIF has been replaced.
For some reason, they also added a port for connecting an external IR receiver for the remote. No, the feature is certainly useful: it lets you tuck the TV box behind the TV and bring only the IR receiver out. But it would have been nice if they’d thought to include the receiver itself...



The bottom also sets this TV box apart from the other models. For example, it has holes for wall mounting, as well as regular ventilation holes—and, most importantly, there are vents on the sides too!
I’ve lost count of how many times I’ve criticized manufacturers for not paying attention in school putting holes only on the bottom or only on the sides. That said, the designer still missed something here: the holes on the bottom are too small.

Also, this is the first time I’ve seen protective stickers on the feet :)


The display is quite bright; I’d dim it a little. It’s especially noticeable when the box powers on and all the segments light up, but then part of the display turns off and the brightness becomes more or less acceptable.


If I were to rank TV boxes by how easy they are to take apart, this one would probably come in first. To remove the bottom cover, you only need to release a few clips, and they’re not very tight.


The rest of the teardown is hidden under the spoiler.


The interface looks pretty standard; nothing new here.


This TV box doesn't have the familiar side settings menu found on modern models, but personally, I find it more convenient this way.


It comes with Android 7.0, with firmware dated October 25, which is fairly recent. Perhaps that's why the attempt to update it over the air came to nothing.


RAM and flash memory status.


Display and resolution settings. There's a PiP (picture-in-picture) option, but I haven't figured out how to use it yet. Also, the list of available resolutions includes all of them, not just those currently supported by my monitor. It also includes some non-standard refresh rates, so perhaps AFR will work too.


1. Video output format setting
2. Initially, the image didn't fill the screen. It turned out the slider in the image size menu wasn't set to maximum.


I didn't change anything here; everything displays just fine as is.


Advanced image output settings.


Compared with the Zidoo, CPU-Z didn't show me anything new, except perhaps the amount of memory.


As usual, I'll put the synthetic performance tests and temperature test results under a spoiler so as not to overload the article with information. Most of the results will be in the summary table.


Although Wi-Fi is only 2.4 GHz, its sensitivity is surprisingly good. It worked reliably even through several reinforced-concrete walls, albeit at around 3–4 Mbps.


In the “room” test, it achieved the following speeds:
1. In the opposite corner of a large room, with no direct line of sight: 20 Mbps
2. A couple of meters away: 30 Mbps
3. One meter away: 40 Mbps.


It comes with a set of apps familiar to many TV box users: a player, file manager, YouTube, several apps for watching online TV, and a utility for clearing RAM.


First, the file manager. It clearly differs from the ones I've seen before, at least in being more convenient. It also lets you preview videos in folders: select a file, and the video plays in a small window on the left.


YouTube.


Overall, everything is fine, although there are a few “buts.”
I could watch videos at up to Full HD; higher resolutions aren't offered. This doesn't depend on the resolution set on the TV box itself.
Some videos stuttered a little, and one—interestingly, a 720p video—stuttered quite noticeably.
I'd roughly break it down like this: 70% played fine, 20% had minor stuttering, and 10% had very noticeable stuttering. I tested both regular 4K videos and 4K 60 fps videos.


It turned out that two players are preinstalled: MXplayer and TVDvideo. The latter has a PiP (picture-in-picture) option, but with an odd quirk: I never figured out how to exit that mode... The player plays all the videos in the selected folder one after another.


1. Play Market works fine, but a couple of times an error popped up even when it wasn't running. It went away after updating Google services.
2. Miracast, nothing special.
3, 4. LiveTV works great, but it wants money.


Modbro is so-so. Some things don't work at all, others are buggy, but sometimes it works perfectly well.


I installed LanetTV to try it out. No complaints: everything works great, though I'd remove some of the channels.


TorrentTV is another puzzling case. First, the software updated completely. Then, on the first viewing, the picture was “choppy,” but subsequent channels played perfectly—with one exception: after 5–7 seconds, the picture freezes. It didn't matter whether I was connected, which player I used, or whether I logged in or watched anonymously.


Our Cinema. It works, but first it asked me to install the YouTube app, then the updated version, and then update Google services. After that, no problems.


I ran into problems with the test 6K file Colours Of Culture Bali (6K.3240p.x264).mkv. MX Player displayed something incomprehensible, while TVDvideo refused to play it at all.
The Peru 8K HDR 60FPS 7680x4320.webm file did play, although it stuttered terribly.


I tested various video file types and formats:
1024x768_h265_AC3.mkv
2560x1600_AAC .mp4
3840x2160_AAC .mp4
4096x2160_AAC .mp4
gopro-hero-3-be-avc-high@l5.1-4096x2160-12p-aac-2ch.mp4
GraysPeak8HDR_Dolby AC3.mp4
LG 4K Paris_AAC.mp4
LG 4K Story-of-Earth_AAC.mp4
LG_Chess_HDR.mp4
Philips_UHD_supershopdemo_1.mp4
samsung-note-3-3840x2160-high@l5.1-AAC-2ch-2.mp4
4K HD.Club Changhong-Furano-100mbps.mp4
Sony_4K_HDR_Camp.mp4
Ducks.Take.Off.720p.QHD.CRF24.x264-CtrlHD.mkv (20 Mbps)
Ducks.Take.Off.1080p.QHD.CRF25.x264-CtrlHD.mkv (108 Mbps)
Ducks.Take.Off.2160p.QHD.CRF25.x264-CtrlHD.mkv (243 Mbps)
4K HD.Club TCL-super_car-Part-1-HEVC.mp4

MX Player performed very poorly. Switching between decoder options didn't help, but TVDvideo did a very good job. In the end, almost everything played perfectly, with a few exceptions:
1. 4096x2160_AAC .mp4 stuttered noticeably.
2. Files with AC3 had no sound


hdr demo 60fps wildlife video — 1920x1080
hdr demo 60fps wildlife video — 2560x1440
hdr demo 60fps wildlife video — 3840x2160
Peru HDR 60FPS — 1920x1080
Peru HDR 60FPS — 2560x1440
Peru HDR 60FPS — 3840x2160
Peru HDR 60FPS — 7680x4320

Only the last file, at 8K resolution, stuttered badly. Peru HDR 60FPS — 3840x2160 had a few brief freezes right at the start, but played perfectly after that.


I also tested two features people often ask about: CEC and AFR.
As for the first one, I can say that I never got CEC to work, though that may be a quirk of my hardware. Other TV box models don't seem to have had any complaints, though.

AFR is a much more complicated matter.
To start with, when I connected a monitor, I could select a refresh rate of 50/60 Hz. 24/25 fps was output at 50 Hz, while 30 fps was output at 60 Hz.


When I connected it to a device that correctly supports all refresh rates, I could change the refresh rate on the TV box and see the same rates on my device.


But unfortunately, the frame rate didn't switch automatically after that. Manually, no problem; automatically, no.
Also, there is no Auto option in the resolution settings, and I couldn't find an AFR mode setting either.


The box passed the Full HD pixel test without any problems.


As an extra, I measured the TV box's power consumption. Fortunately, that's easy to do.
1. Idle
2. Same setup, but with an HDMI-VGA converter connected. I usually use one to test all TV boxes, so the current reading here includes its 400 mA draw.
3. External hard drive connected, TV box idle.
4. Hard drive disconnected, TV box running the Bonsai test.

The TV box can power the hard drive, but when the HDMI-VGA converter is connected, it periodically disconnects. Without the converter, it works normally. I tried a different power supply and cable, and everything worked fine.


Summary table. The highest test results are shown; you can read more in the relevant section.


So, what can I say in conclusion? The manufacturers have unexpectedly remembered the AllWinner H6 processors, which are interesting in their own right and relatively new (the well-known S9xx and Rockchip chips came out considerably earlier), but in my opinion were unjustifiably forgotten by manufacturers.
Unfortunately, though, I can't recommend this TV box. Yes, it has a convenient power connector, handles video files well, has stable Wi-Fi, and works pretty well overall. But it also has significant drawbacks: overheating, YouTube limited to 1080p (I think this can be fixed), and CEC and AFR are effectively absent—or, more precisely, don't work automatically.

Overall, it seems the manufacturer rushed the release a little. The box offers a decent price-to-feature ratio, but its weaker software compared with Zidoo's lets it down.
At $40, it's not a bad option, though in my opinion it still falls noticeably short of the Zidoo box.

That's all from me. As usual, I'll be glad to hear your questions and suggestions for other tests. If I can, I'll check them.
$39.99
Go to store
This page was found when searching for:
eachlink h6 мини smart тв box allwinner h6 android 7,0 android тв декодер каналов кабельного телевидения 3 gb 32 gb 2,4g wi-fi 100 мбит bt4.1 6 k h.265 коробка тв eu plug, прошитьтв приставку н6 мини, https://www.kirich.blog/obzory/tv-boksy/662-eachlink-h6-mini-esche-odin-tv-boks-na-baze-allwinner-h6, allwinner h6 afrd, прошивка бокс тв, allwinner h6 mali t720 4 gb, тв боксы на процессоре allwinner h6 minibox, прошивка tvbox h6 allwinner, h96 mini h6 firmware, h6 mini прошивка, тв приставка h6 прошивка, allwinner h6 прошивка, allwinner h6, afrd pro для allwinner h6, прошивка x6 mini, h6 mini прошивка 2020, h6 tv box pdu настройка, характеристики тв бокса н6, allwinner h6 характеристики процессора, тв боксы с процессором алвиннер н6, allwinner h6 прошивка android 10, приставка h6 прошивка, allwinner h6 android tv, есть ли прошивка на тв бокс мини аш 6, блок питания для тв приставки eachlink h6 mini, телевизионная приставка на Android, ТВ бокс на Андроид, Eachlink h6 mini TV Box, Eachlink отзывы, тест ТВ бокса

Questions and answers

What are the EACHLINK H6 Mini’s main specifications?

It has an AllWinner H6 processor, 3 GB DDR4 RAM and 32 GB of flash storage, and runs Android 7.0. Connectivity includes 2.4 GHz Wi-Fi, Bluetooth 4.1 and 10/100M Ethernet.

What drawbacks did the EACHLINK H6 Mini review find?

The box overheated, YouTube was limited to 1080p, and CEC and automatic AFR operation were effectively absent. Its software was weaker than that of the Zidoo H6 Pro.

How does the EACHLINK H6 Mini handle video and an external hard drive?

It played video files well overall and had stable Wi-Fi. The external hard drive worked normally without an HDMI-VGA converter; with one connected, it sometimes disconnected, but changing the power supply and cable resolved the issue.


Discounted products


You may be interested in


Discounted products


Support the project

All the content on the site and the advice are free, but we’d be grateful for your support of the project and the channel!

Comments2

Comments are published in their original language.

  1. Дмитрий
    13 December 2018 01:16#1
    Здравствуйте! Скажите пожалуйста, как сделать "пиксельный тест в FullHd" и в чем его смысл?
    0
    1. 14 December 2018 03:03#2
      Для теста запускается видеофайл где чередуются черточки расположенные через один пиксель. Дело в том, что не все ТВ боксы и не все плееры выводят корректно, а это нужно для правильного отображения видео.
      0

Discuss on the forumHave a question or some experience to share? Discuss the article with the author and readers: the forum is a convenient place to share schematics and photos.
Go to the forum

Only registered readers can comment. It takes a minute to sign up, and you can log in with the same account you use on the forum.

Log inRegister