Upgrading the EBC-A10H Electronic Load, Part One
3-06-2019, 14:07
I’d posted two reviews of SANMIM power supplies and was about to start on a third when I remembered that my main electronic load can handle only 60 W, while the power supply is rated for at least 70 W. So I decided to make a few upgrades to the electronic load while I was at it.
EBC-A20, another electronic load from ZKEtech
15-03-2019, 01:24
The second electronic load from ZKEtech, bought quite recently, and the third device in my collection of measuring instruments. Though in this case, calling it a measuring instrument is a bit of a stretch, and it doesn't quite fit the definition of an “electronic load” either, since it's also partly a battery tester. Anyway, today I'm reviewing the 20 A version.
Adapter for an electronic load for testing power supplies with a USB output
13-03-2019, 01:10
A very brief review in which I’ll show you a useful accessory that expands the functionality of the electronic load I reviewed recently.
ZKEtech EBC-A10H Electronic Load
11-03-2019, 15:31
A little over three years ago, I reviewed the ZKE EBC-A10 electronic load. It quickly became one of my main instruments for battery testing, and you’ve probably seen both the load itself and the graphs I included in my battery reviews. The instrument turned out to be genuinely useful. As far as I know, my review was either the first or one of the first, but it’s time for an upgrade. Today, I’ll be taking a look at the new version of this electronic load.
