Electronics and technology blog    /    Comments

Thanks for repl. I've build this board with irfp260n transistors and it seems to work. I've tested with some 18650 cells and makita 18V liion battery with 8A current. I have question - where to measure voltage to possibly make some modification for be sure that load is divided 50/50 between transistors ? Mesaure voltage on R2 nad R7 (3M resistors) ? Measure with or without load ?

Hi. I don't speak russian, I speak englisch, sorry for that. I have few questions about this pcb : https://www.kirich.blog/uploads/posts/2020-11/medium/1606354934_82img_4359-kopi
ya.jpg
All resistors are 1% or could be 5% ? Ceramic capacitor on scheme are marked as 200, but they are 200nF (nanofarad), 200pF (picofarad) ?
Could You write also resistors sizes ? Thanks, best regards, Kris.