/       /       /       /    Page 4

Support the project on Patreon




Decent leads for a bench power supply and alligator clips
5 4512+9$4.45

Decent leads for a bench power supply and alligator clips

Decent leads for a bench power supply and alligator clips
5 4512+9$4.45
Like many others, I use leads with alligator clips to connect a bench power supply or electronic load, and I felt like replacing them. Of course, I could make my own leads, and I do use some, but I was feeling a bit lazy. I searched AliExpress, found what looked like a decent option, ordered it, and decided to share my impressions.
Go to storeRead more
More fans, or how I bought Sunon fans
5 11315+13$4.68

More fans, or how I bought Sunon fans

More fans, or how I bought Sunon fans
5 11315+13$4.68
As I’ve already mentioned, I needed some high-performance fans for one of my projects. First I bought a couple of AVC fans, then, almost as an afterthought, three more from Sunon. Tests showed that the AVC fans I bought didn’t live up to their specs, but it was hard for me to judge what they should be like since I had nothing to compare them with. Today, though, I’ll show you the Sunon fans and compare them with the originals.
Go to storeRead more
EGS002 board and display for building a pure sine wave inverter
46 4854+16$2.99 + $1.92

EGS002 board and display for building a pure sine wave inverter

EGS002 board and display for building a pure sine wave inverter
46 4854+16$2.99 + $1.92
Today's review will be very short, partly because there isn't really much to review here, and partly because the project this board was intended for is still in development. Still, I hope you'll find it useful.
Go to storeRead more
Interesting 70 mm AVC fans
3 4012+9$2.50 (без учета доставки)

Interesting 70 mm AVC fans

Interesting 70 mm AVC fans
3 4012+9$2.50 (без учета доставки)
Continuing the discussion about electronic loads. As everyone knows, a load is something that usually gets very hot. And when something gets hot, it sometimes needs cooling. The most common solution is a heatsink, and when that isn't enough, you add a fan as well. Fans aren't exactly cheap in local stores these days, especially high-performance ones, so I ordered some from China.
Go to storeRead more
Used FDA59N30 transistors and a comparison with new ones
5 2606+13$8.29

Used FDA59N30 transistors and a comparison with new ones

Used FDA59N30 transistors and a comparison with new ones
5 2606+13$8.29
I’ve covered buying used components from AliExpress/Taobao on my blog several times, but I decided to play roulette once again, and it looks like I got lucky this time.
Go to storeRead more
Fuses for a multimeter, 1 and 10 amps
11 4214+14$7.51

Fuses for a multimeter, 1 and 10 amps

Fuses for a multimeter, 1 and 10 amps
11 4214+14$7.51
Today I have a short review on a very popular topic: fuses. Yes, we’re talking about the component that, as everyone knows, is the last thing to blow. Of course, there are plenty of nuances here, and I’ll try to explain some of them.
Go to storeRead more
A 500 W charger—so this is what you’re like, Abibas
5 7043+13$19.00 (без учета доставки)

A 500 W charger—so this is what you’re like, Abibas

A 500 W charger—so this is what you’re like, Abibas
5 7043+13$19.00 (без учета доставки)
Some time ago, one of my subscribers sent me a power supply—or, more precisely, a charger—not for repair, but for testing and review. But what’s actually more interesting is a certain “special feature” I’ve wanted to tell you about for a long time, but hadn’t come across a sample to show. To get ahead of myself, everything turned out better than I expected :)
Go to storeRead more
Makita Power Tool Battery Charger
7 55714+9$16.56 (без учета доставки)

Makita Power Tool Battery Charger

Makita Power Tool Battery Charger
7 55714+9$16.56 (без учета доставки)
As I mentioned before, along with the BL1850 and BL1860 batteries, I also received a charger for them. At first, I hadn't even planned to review it, but I tested it while checking the batteries, took it apart, and decided it was probably worth writing about after all.
Go to storeRead more
BL1860 battery for Makita tools
10 9394+9$36.57 (без учета доставки)

BL1860 battery for Makita tools

BL1860 battery for Makita tools
10 9394+9$36.57 (без учета доставки)
So, I’ve just finished testing the second battery I received, and this one is the BL1860, rated at 6 Ah. Inspection, teardown, tests, conclusions—as usual.
Go to storeRead more
Makita power tool batteries and charger
16 7186+13$28.29 (без учета доставки)

Makita power tool batteries and charger

Makita power tool batteries and charger
16 7186+13$28.29 (без учета доставки)
Not long ago, I was asked to test and review some batteries for Makita power tools. Since this is right up my alley, and the batteries were expected to be good, I thought, why not? In short and subjectively: they’re solid. For the long, objective version, read on.
Go to storeRead more
Universal QC and PD Protocol Trigger (Dummy Load)
8 2968+8$0.99

Universal QC and PD Protocol Trigger (Dummy Load)

Universal QC and PD Protocol Trigger (Dummy Load)
8 2968+8$0.99
Some time ago, I reviewed a universal trigger that was advertised as offering convenient controls and Power Delivery support, but in practice it turned out to be pretty mediocre. This time, I bought a few simple, compact models that turned out to be surprisingly good.
Go to storeRead more
Pure sine wave inverter, or how the Chinese have gotten too bold
88 25527+45$44.18

Pure sine wave inverter, or how the Chinese have gotten too bold

Pure sine wave inverter, or how the Chinese have gotten too bold
88 25527+45$44.18
Around the middle of December, I ordered several inverters. I also decided to order a couple from a different store than the one I usually use. Naturally, I read the reviews first, where buyers showed that yes, it really does produce a pure sine wave output. But things turned out not to be so simple.
Go to storeRead more
An Interesting but Slightly Strange Battery Protection Board
10 2998+8$2.00

An Interesting but Slightly Strange Battery Protection Board

An Interesting but Slightly Strange Battery Protection Board
10 2998+8$2.00
While preparing a couple of upcoming reviews, I needed to assemble a battery pack. Since the cells are lithium-based, they usually need a protection board. I originally bought this one for other batteries, but it came in handy here too.
Go to storeRead more
A soft, great cable for a soldering iron, but...
8 30118+12$7.99

A soft, great cable for a soldering iron, but...

A soft, great cable for a soldering iron, but...
8 30118+12$7.99
While I’m getting material ready for some other reviews, I decided to put together a short one. I remember getting carried away last time and saying I’d try to keep things a bit shorter, and today seems like just the right occasion :) In short, I’ll show you a pretty good cable for a soldering iron.
Go to storeRead more
Another set of Vapcell LiFePO4 32700 batteries with a claimed capacity of 6200 mAh
4 82112+13

Another set of Vapcell LiFePO4 32700 batteries with a claimed capacity of 6200 mAh

Another set of Vapcell LiFePO4 32700 batteries with a claimed capacity of 6200 mAh
4 82112+13
Back to the topic of off-grid power. Today I have some 32700 LiFePO4 batteries on my desk. Why “again”? Because this is already my fourth review of batteries in this size, and my second review of similar batteries from Vapcell.
Go to storeRead more
An unusual power bank with a QC/PD output of up to 22 W and a few quirks
15 25114+16$7.82

An unusual power bank with a QC/PD output of up to 22 W and a few quirks

An unusual power bank with a QC/PD output of up to 22 W and a few quirks
15 25114+16$7.82
A couple of months ago, I was browsing AliExpress and came across some interesting power bank cases. What caught my eye was how often I saw them, in all sorts of variations, yet they all shared the same style: a colored cartridge inside a transparent case. Anyway, I ordered one and it arrived.
Go to storeRead more
Emulator for controlling a QC/PD power supply
7 5860+5$1.69

Emulator for controlling a QC/PD power supply

Emulator for controlling a QC/PD power supply
7 5860+5$1.69
This device is more commonly called a trigger, though that’s not quite accurate. Somehow, the name just stuck. I decided to order one mostly on principle—“just to have it.” And since I’ve got it in my hands now, why not test it and show what it can do?
Go to storeRead more
Compact converter with QC support and two outputs
3 0440+4$2.10

Compact converter with QC support and two outputs

Compact converter with QC support and two outputs
3 0440+4$2.10
I got my hands on a dual-port converter with QC support for a little while, so I decided to test it a bit in case anyone finds it useful.
Go to storeRead more